Equivalency of a personal dust monitor to the current United States coal mine respirable dust sampler

The United States National Institute for Occupational Safety and Health, through an informal partnership with industry, labor, and the United States Mine Safety and Health Administration, has developed and tested a new instrument known as the Personal Dust Monitor (PDM). The new dust monitor is an integral part of the cap lamp that coal miners normally carry to work and provides continuous information about the concentration of respirable coal mine dust within the breathing zone of that individual. Previous laboratory testing demonstrated that there is a 95% confidence that greater than 95% of individual PDM measurements fall within +/-25% of reference measurements. The work presented in this paper focuses on the relationship between the PDM and respirable dust concentrations currently measured by a coal mine dust personal sampler unit utilizing a 10 mm Dorr-Oliver nylon cyclone. The United Kingdom Mining Research Establishment instrument, used as the basis for coal mine respirable dust standards, had been designed specifically to match the United Kingdom British Medical Research Council (BMRC) criterion. The personal sampler is used with a 1.38 multiplier to convert readings to the BMRC criterion. A stratified random sampling design incorporating a proportionate allocation strategy was used to select a sample of mechanized mining units representative of all US underground coal mines. A sample of 180 mechanized mining units was chosen, representing approximately 20% of the mechanized mining units in production at the time the sample was selected. A total of 129 valid PDM/personal sampler dust sample sets were obtained. A weighted linear regression analysis of this data base shows that, in comparison with the personal sampler, the PDM requires a mass equivalency conversion multiplier of 1.05 [95% C.I.=(1.03, 1.08)] when the small intercept term is removed from the analysis. Removal of the intercept term results in a personal sampler-equivalent concentration increase of 2.9% at a PDM measurement of 2.0 mg m(-3).     

Spatial Prediction of Stream Temperatures Using Top-Kriging with an External Drift

Top-kriging is a method for estimating stream flow and stream flow-related variables on a river network. Top-kriging treats these variables as emerging from a two-dimensional spatially continuous process in the landscape. The top-kriging weights are estimated by a family of variogram models (regularisations) for different catchment areas (kriging support), which accounts for the different scales and the nested nature of the catchments. This assures that kriging weights are distributed to both hydrologically connected and unconnected sites of the stream network according to the data situation: top-kriging gives most weight to close-by sites at the same river system, but when the next hydrologically connected site is far away, more weight is given to a close-by site at an adjacent river system. The distribution of weights is in contrast to ordinary kriging and stream distance-based kriging which does not account for both spatial proximity and network connectivity. We extend the top-kriging method by incorporating an external drift function to account for the deterministic patterns of the spatial variable. We test the method for a comprehensive Austrian stream temperature dataset. The drift is modelled by exponential regression with catchment altitude. Top-kriging is then applied to the regression residuals. The variogram used in top-kriging is fitted by a semiautomatic optimisation procedure. A leave-one-out cross-validation analysis shows that the model performs well for the study domain. The residual mean squared error (cross-validation) decreases by 20 % when using top-kriging in addition to the regression model. For regions where the observed stream temperatures deviate from the expected value of the drift model, top-kriging corrects these regional biases. By exploiting the topological information of the stream network, top-kriging is able to improve the local adjustment of the drift model for the main streams and the tributaries.     

Measurements of Rural Sulfur Dioxide and Particle Sulfate: Analysis of CASTNet Data, 1987 through 1996

ABSTRACT

The Clean Air Status and Trends Network (CASTNet) was implemented by the U.S. Environmental Protection Agency (EPA) in 1991 in response to Title IX of the Clean Air Amendments of 1990, which mandated the deployment of a national ambient air monitoring network to track progress of the implementation of emission reduction programs in terms of deposition, air quality, and changes to affected ecosystems. CASTNet evolved from the National Dry Deposition Network (NDDN). CASTNet currently consists of 45 sites in the eastern United States and 28 sites in the West. Each site measures sulfur dioxide (SO₂), nitric acid (HNO₃), particle sulfate (SO₄ ⁼), particle nitrate (NO₃ ^- ), and ozone. Nineteen sites collect precipitation samples. NDDN/CASTNet uses a uniform set of site-selection criteria which provides the data user with consistent measures to compare each site. These criteria also ensure that, to the extent possible, CASTNet sites are located away from local emission sources.

This paper presents an analysis of SO₂ and SO₄ ⁼ concentration data collected from 1987 through 1996 at rural NDDN/CASTNet sites. Annual and seasonal variability is examined. Gradients of SO₂ and SO₄ ⁼ are discussed. The variability of the atmospheric mix of SO₂ and SO₄ ⁼ is explored spatially and seasonally. Data from CASTNet are also compared to SO₂ and SO₄ ⁼ data from concurrent monitoring studies in rural areas.     

The Use of the Isotopic Composition of Individual Compounds for Correlating Spilled Oils and Refined Products in the Environment with Suspected Sources

Correlation of crude oils, or refined products, in the environment with suspected sources is typically undertaken through the use of GC and GCMS and in certain cases bulk carbon isotope compositions. However, with crude condensates, or refined products in particular, the absence, or low concentration, of biomarkers precludes their successful use for making unique correlations. An alternative and, sometimes, complimentary technique for correlation of such products is evolving through the use of combined gas chromatography-isotope ratio mass spectrometry (GCIRMS). This approach permits determination of the carbon and hydrogen isotopic composition of individual compounds in the crude oil or refined product to produce isotopic fingerprints for use in correlation studies. In this paper, it is proposed to review applications of GCIRMS to the correlation of various spilled products with their suspected sources in different environments. Whilst not proposing that this technique will replace GC or GCMS; it is proposed that GCIRMS is a very powerful tool to be used in conjunction with GC and GCMS to make such correlations. Although isotopic fractionation has been observed in some of the lighter components such as benzene and toluene, higher carbon numbered compounds, say above C 10 , do not appear to undergo any significant isotopic fractionation as a result of weathering. Furthermore with refined products, isotopic fractionation of the lighter components has the potential to demonstrate the onset of natural attenuation of refined products in the environment.     

Methods to determine response factors for infrared gas imagers used as quantitative measurement devices

Response factors (RF) can be used to characterize relative sensitivity of one compound vs. another compound for the same measurement instrument. Use of RF allows the analysts/operators to calibrate the instrument with one compound and make measurement for a large number of compounds. This method is adopted for Flame Ionization Detector (FID) based survey instruments used in the Leak Detection and Repair (LDAR) practice for control of fugitive emissions of volatile organic compounds. Gas detecting Infrared (IR) cameras have been used for leak detection. However, the RF for IR cameras has not been well established despite some attempt to develop a method for IR camera RF. In addition to a method proposed earlier (Method 1), two new methods for IR camera RF are proposed in this paper: Method 2 based on theoretical approach and Method 3 based on experimental approach. All three methods are examined and compared. Both Methods 2 and 3 have shown the ability to characterize the behavior of RF for various compounds and substantially higher accuracy than Method 1. Method 2 provides a mechanism to generate RF for a large number of compounds without conducting experiments, and is recommended for implementation. The RF derived from this method can be used both in the emerging field of Quantitative Optical Gas Imaging (QOGI) and to answer the most common question that IR camera users ask—whether a particular compound can be imaged by a particular IR camera.Implications: Infrared imager is an efficient tool for detecting gas leaks from process equipment and has been used in leak detection and repair (LDAR) programs for control of fugitive emissions. However, the information regarding which chemical compounds can be imaged and how sensitive a given infrared imager is for various compounds is limited. A theoretical method is presented in this paper that can answer these questions without conducting resource-intensive experiment. The results of this theoretical method has good agreement with experimental data. The method has been used to predict relative sensitivity for 398 compounds.     

Predicting climate change effects on wetland ecosystem services using species distribution modeling and plant functional traits

Wetlands provide multiple ecosystem services, the sustainable use of which requires knowledge of the underlying ecological mechanisms. Functional traits, particularly the community-weighted mean trait (CWMT), provide a strong link between species communities and ecosystem functioning. We here combine species distribution modeling and plant functional traits to estimate the direction of change of ecosystem processes under climate change. We model changes in CWMT values for traits relevant to three key services, focusing on the regional species pool in the Norrström area (central Sweden) and three main wetland types. Our method predicts proportional shifts toward faster growing, more productive and taller species, which tend to increase CWMT values of specific leaf area and canopy height, whereas changes in root depth vary. The predicted changes in CWMT values suggest a potential increase in flood attenuation services, a potential increase in short (but not long)-term nutrient retention, and ambiguous outcomes for carbon sequestration.     

Creative and disruptive elements in Norway´s climate policy mix: the small-state perspective

ABSTRACT

Recent scholarship has argued that effective and credible national climate policy mixes should encompass measures that promote new low-carbon technologies alongside those instruments aimed at constraining and phasing out support for existing polluting industries. The creative and disruptive policy measures in Norway´s climate policy mix are analysed by focusing on both national and international climate mitigation efforts. Norway´s climate policy mix at home has been more ambitious in the transport sector with a growing electric vehicle market than in the energy sector where niche support and disruptive policies have remained weak. Abroad, Norway has been increasingly active in supporting new low-carbon technologies and disrupting the fossil-fuel industry, especially coal. This is explained by the consensus-seeking and oil and gas dominated small-state social-investment political economy in Norway, combined with a forward-looking foreign policy based on norm-setting and multilateralism.     

Monofluorinated analogues of polychlorinated biphenyls (F-PCBs): synthesis using the Suzuki-coupling, characterization, specific properties and intended use

An improved method, a palladium-catalyzed cross-coupling reaction the so-called Suzuki-coupling, was used to synthesize 19 monofluorinated analogues (F-PCBs) of polychlorinated biphenyls (PCBs), including analogues of PCBs 28, 52 and 81. The coupling of chlorinated and/or fluorinated isomers of aryl boronic acids with bromo- and/or iodobenzenes gave the desired F-PCB congeners in good to excellent yields. The self-coupling product of the aryl boronic acids was the major impurity, but this limitation could be minimized. The influence of ortho-substitution by chlorine on the reaction time was studied in detail. The F-PCBs were characterized by means of ¹H and ¹⁹F NMR and mass spectrometry (MS). F-PCBs show remarkably similar characteristics in many aspects to those of the corresponding non-fluorinated parent PCBs. Since fluorine is generally resistant to degradation, once incorporated into a substrate it functions as an indelible label that can be used to monitor structures and dynamics. F-PCBs may prove their usefulness as markers and tracers in mechanistic and toxicological studies. The aim of further research will be to test the suitability of fluorine as a sensitive probe in a broad range of applications, including synthesis, analytical, mechanistic and toxicological studies.     

Modeling of metal binding in tropical Fluvisols and Acrisols treated with biosolids and wastewater

There is growing concern about the accumulation of metals in tropical agricultural soils. In this study, experimental results from batch studies were used to test whether multi-surface geochemical models could describe metal binding in selected Vietnamese soils. The multi-surface models considered metal binding to iron hydroxides (using the diffuse layer model), organic matter (Stockholm Humic model and NICA-Donnan model), and phyllosilicate clay (Gaines-Thomas equation) as well as complexation to dissolved organic and inorganic ligands in the solution phase. We found that for total dissolved Cd, Cu and Zn the two multi-surface models being tested provided very good model fits for all soils, as evidenced by low root-mean square errors between model predictions and observations. These results suggest that organic matter is an important sorbent for many metals in these soils. However, poor fits were obtained for Cr(III), Mn and Pb for all soils. The study also suggests that the pH is the main factor that controls the solubility of metals in tropical Fluvisols and Acrisols subjected to application of biosolids and wastewater, and that advanced multi-surface models can be used to simulate the binding and release of many trace metals.     

High reduction of ozone and particulate matter during the 2016 G-20 summit in Hangzhou by forced emission controls of industry and traffic

Many regions in China experience air pollution episodes because of the rapid urbanization and industrialization over the past decades. Here we analyzed the effect of emission controls implemented during the G-20 2016 Hangzhou summit on air quality. Emission controls included a forced closure of highly polluting industries, and limiting traffic and construction emissions in the cities and surroundings. Particles with aerodynamic diameter lower than 2.5 μm (PM_2.5) and ozone (O₃) were measured. We also simulated air quality using a forecast system consisting of the two-way coupled Weather Research and Forecast and Community Multi-scale Air Quality (WRF-CMAQ) model. Results show PM_2.5 and ozone levels in Hangzhou during the G-20 Summit were considerably lower than previous to the G-20 Summit. The predicted concentrations of ozone were reduced by 25.4%, whereas the predicted concentrations of PM_2.5 were reduced by 56%.