Survey of dioxin sources in the Baltic Region (extended summary)

The present paper summarises the results of the project: 'Survey of Anthropogenic Sources of Dioxins and Furans in the Baltic Region'. As a part of the project, inventories have been carried out in Estonia, Latvia, Lithuania and Poland by applying the toolkit for quantification of dioxin and furan releases developed by UNEP Chemicals. The main route of direct releases to the environment is emission to air. Total emission to air from Poland was estimated at 490 (88-1,300) g I-TEQ/year, whereas the emissions from Estonia, Latvia and Lithuania were estimated as being 14 (2.4-54), 23 (2.6-63) and 17 (2.6-38) g I-TEQ, respectively. In general, the uncertainty on the estimates is very high, and recommendations regarding further development of the inventories have been made, and measures for reducing the releases have been provided.     

Effects of whole spine alignment patterns on neck responses in rear end impact

Objective: The aim of this study was to investigate the whole spine alignment in automotive seated postures for both genders and the effects of the spinal alignment patterns on cervical vertebral motion in rear impact using a human finite element (FE) model.

Methods: Image data for 8 female and 7 male subjects in a seated posture acquired by an upright open magnetic resonance imaging (MRI) system were utilized. Spinal alignment was determined from the centers of the vertebrae and average spinal alignment patterns for both genders were estimated by multidimensional scaling (MDS). An occupant FE model of female average size (162 cm, 62 kg; the AF 50 size model) was developed by scaling THUMS AF 05. The average spinal alignment pattern for females was implemented in the model, and model validation was made with respect to female volunteer sled test data from rear end impacts. Thereafter, the average spinal alignment pattern for males and representative spinal alignments for all subjects were implemented in the validated female model, and additional FE simulations of the sled test were conducted to investigate effects of spinal alignment patterns on cervical vertebral motion.

Results: The estimated average spinal alignment pattern was slight kyphotic, or almost straight cervical and less-kyphotic thoracic spine for the females and lordotic cervical and more pronounced kyphotic thoracic spine for the males. The AF 50 size model with the female average spinal alignment exhibited spine straightening from upper thoracic vertebra level and showed larger intervertebral angular displacements in the cervical spine than the one with the male average spinal alignment.

Conclusions: The cervical spine alignment is continuous with the thoracic spine, and a trend of the relationship between cervical spine and thoracic spinal alignment was shown in this study. Simulation results suggested that variations in thoracic spinal alignment had a potential impact on cervical spine motion as well as cervical spinal alignment in rear end impact condition.     

Main nutrient compounds in food bodies of Mexican <Emphasis Type="Italic">Acacia</Emphasis> ant-plants

Summary. Myrmecophytic plants use obligate ant mutualists as a constitutive indirect defence mechanism. These plants often produce cellular food bodies (FBs) to nourish their resident ants. Lipids, proteins, and even highly specialised compounds such as glycogen have been reported from FBs, but detailed chemical analyses of FB composition have so far been presented only for Southeast Asian Macaranga and Central American Piper myrmecophytes. Here we report the chemical composition of FBs of five myrmecophytic Acacia (Fabaceae) species from Mexico using HPLC (carbohydrates and proteins) and GC-MS (lipids). Feeding experiments revealed no hints on any use of external food sources by the inhabiting Pseudomyrmex ants. These ants obviously rely completely on FBs and extrafloral nectar provided by their hosts. The total content of nutrients in Acacia FBs was 15-25% of FB dry mass, being much lower than in Macaranga or Piper FBs. Proteins were dominating (8-14 % dm) in Acacia FBs and thus were present in higher amounts than in Macaranga FBs, yet in lower amounts than in Piper. Lipids contributed 1-9 % of dry mass, showing a lower proportion than in FBs of Macaranga or Piper. Carbohydrates made up 3-11 % dm, reaching in most Acacia species the same range as observed in Macaranga and in Piper FBs. Water content was 18-24 % of FB fresh mass, and structural tissue obviously made up a much higher proportion in Acacia FBs than in Macaranga or Piper FBs. Both characters might represent an adaptation to producing FBs unprotected at the leaf tips under dry conditions. Acacia FBs contain all amino acids and all fatty acids that are considered essential for insects, and their contents of lipids and proteins are higher than in the leaves from which they are ontogenetically derived. This indicates a putatively adaptive enrichment of nutritionally valuable compounds in structures functioning as ant-food.     

Desert locust control in ecologically sensitive areas: need for guidelines

Chemical control of desert locust (DL) is carried out over large areas of land, covering a range of different landscapes and ecosystems. There are no real restrictions for spraying in or close to environmentally sensitive areas and awareness of sensitivity is not always obvious to the people involved in control. However, concern about environmental issues in connection with DL control is growing and clear guidelines are needed. The objectives were: to identify and delineate areas particularly sensitive to pesticide contamination in northeastern Africa, e.g. protected areas, wetlands, populated places, oases, and areas with concentrations of migratory birds. These areas were matched with actual DL control during 1986-1998. The conclusion is that chemical control occurred in environmentally sensitive areas especially wetlands, e.g. temporary waters and mangroves; close to human settlements; and, to some extent, in or near protected areas and areas with numerous migratory birds.     

Release and fate of fluorocarbons in a shredder residue landfill cell: 2. Field investigations

The shredder residues from automobiles, home appliances and other metal containing products are often disposed in landfills, as recycling technologies for these materials are not common in many countries. Shredder waste contains rigid and soft foams from cushions and insulation panels blown with fluorocarbons. The objective of this study was to determine the gas composition, attenuation, and emission of fluorocarbons in a monofill shredder residue landfill cell by field investigation. Landfill gas generated within the shredder waste primarily consisted of CH₄ (27%) and N₂ (71%), without CO₂, indicating that the gas composition was governed by chemical reactions in combination with anaerobic microbial reactions. The gas generated also contained different fluorocarbons (up to 27 μg L^?1). The presence of HCFC-21 and HCFC-31 indicated that anaerobic degradation of CFC-11 occurred in the landfill cell, as neither of these compounds has been produced for industrial applications. This study demonstrates that a landfill cell containing shredder waste has a potential for attenuating CFC-11 released from polyurethane (PUR) insulation foam in the cell via aerobic and anaerobic biodegradation processes. In deeper, anaerobic zones of the cell, reductive dechlorination of CFCs to HCFCs was evident, while in the shallow, oxic zones, there was a high potential for biooxidation of both methane and lesser chlorinated fluorocarbons. These findings correlated well with both laboratory results (presented in a companion paper) and surface emission measurements that, with the exception from a few hot spots, indicated that surface emissions were negative or below detection.     

Release and fate of fluorocarbons in a shredder residue landfill cell: 1. Laboratory experiments

The shredder residues from automobiles, home appliances and other metal-containing products are often disposed in landfills, as recycling technologies for these materials are not common in many countries. Shredder waste contains rigid and soft foams from cushions and insulation panels blown with fluorocarbons. The objective of this study was to use laboratory experiments to estimate fluorocarbon release and attenuation processes in a monofill shredder residue (SR) landfill cell. Waste from the open SR landfill cell at the AV Miljø landfill in Denmark was sampled at three locations. The waste contained 1–3% metal and a relatively low fraction of rigid polyurethane (PUR) foam particles. The PUR waste contained less blowing agent (CFC-11) than predicted from a release model. However, CFC-11 was steadily released in an aerobic bench scale experiment. Anaerobic waste incubation bench tests showed that SRSR produced significant methane (CH₄), but at rates that were in the low end of the range observed for municipal solid waste. Aerobic and anaerobic batch experiments showed that processes in SRSR potentially can attenuate the fluorocarbons released from the SRSR itself: CFC-11 is degraded under anaerobic conditions with the formation of degradation products, which are being degraded under CH₄ oxidation conditions prevailing in the upper layers of the SR.     

Adsorption of PCDD/F on MWI fly ash

The removal of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F) from waste incinerator off-gas is a costly task, because a considerable part of the PCDD/F may exist in the gas phase (often 50-100% around 200 degrees C). The volatile fraction passes the particle filter and the subsequent gas cleaning equipment, so that an additional unit is needed to remove the gaseous PCDD/F from the flue gas. Moreover, dioxins and furans can accumulate in some parts of the equipment in a way that they can act as a latent source. In this work, we investigate the possibility to adsorb the PCDD/F at the fly ash particles and to remove them during the filtration. The gas/particle partitioning of the PCDD/F depends on the temperature, the vapor pressure, the particle size, the particle number density and on the physical and chemical properties of the particle surface. These relationships are investigated by model calculations and by pilot scale experiments (500 Nm3/h) which employ one selected hexachlorinated dioxin congener. At room temperature, approx. 90% of the HxCDD are found in the particulate phase, while at 135 degrees C that portion is only 10%. This means that at ambient temperatures, the gas/particle partitioning of the dioxin corresponds well to the sublimation equilibrium. At higher temperatures, it is much different from the sublimation equilibrium and the apparent adsorption enthalpy is smaller than the enthalpy of sublimation. This observation is in agreement with literature data. From the above experiments and from similar literature data, the efficiency of fly ash particles as a sink for PCDD/F can be evaluated. The data suggest that the adsorption rate is not the limiting factor for the transfer into the particulate phase. The important factors appear to be the chemical composition of the fly ash and the temperature.