Formation of dioxins (PCDDs/PCDFs) by dioxin-free fly ash as a catalyst and relation with several chlorine-sources

Simplified thermal formation experiments have been conducted using dioxin-free fly ash as a catalyst with many kinds of combustible samples such as newspaper, kerosene, paraffin, PE (polyethylene), PP (polypropylene) and PVC. Chlorine sources were PVC, NaCl and HCl. The combustion of samples containing chlorine in the absence of dioxin-free fly ash produced dioxins at a low level although HCl was present in the gas stream. On the other hand, the combustion of samples without chlorine with dioxin-free fly ash increased dioxins formation to a level around 10 times higher than that upon heating dioxin-free fly ash alone. This result is considered to be due to the presence of metal chloride in the fly ash and hydrocarbons in the gas stream. The combustion of samples containing either an organic or inorganic chlorine source or using a HCl stream with dioxin-free fly ash increased dioxin level dramatically.     

Anaerobic digestion of linear alkyl benzene sulfonates: biodegradation kinetics and metabolite analysis

In the present work the effect of the alkyl chain length and the position of the sulfophenyl substituent of the linear alkylbenzene sulfonates (LAS) on their anaerobic biodegradability have been investigated. Degradation kinetics of the linear alkyl benzene sulfonates homologues, 2C₁₀LAS, 2C₁₂LAS and 2C₁₄LAS, have been studied. It has been also investigated the effect of the isomer type on the degradation rate of the LAS molecule through the comparative study of the 2C₁₀LAS and 5C₁₀LAS isomers. Batch anaerobic biodegradation tests were performed using sludge from the anaerobic digester of a wastewater treatment plant as microorganisms source. Ultimate biodegradation was evaluated from the biogas production whereas primary biodegradation was determined by specific analysis of the surfactant. LAS homologues and isomers showed a negligible primary biodegradation under anaerobic conditions. Furthermore, analysis of sulfophenyl carboxilates (SPC) by LC–MS indicated a low and constant level of these LAS degradation metabolites over the test period. These data are consistent with a minimal transformation of the LAS parent molecule in the anaerobic digesters. On the other hand, the addition of the shortest alkyl chain length homologues, decyl and dodecylbenzene sulfonates, reduces the biogas production whereas the most hydrophobic homologue, the tetradecylbenzene sulfonate, enhances the biogas production. This LAS homologue seems to increase the availability of organic compounds sorbed on the anaerobic sludge promoting their biodegradation.     

Comparison of spontaneous antibiotic resistance frequency of Salmonella Typhimurium growth in glucose amended continuous culture at slow and fast dilution rates

The objective of the study was to determine the frequency of spontaneous acquisition of resistance to select antibiotics by Salmonella Typhimurium (ST) when grown in glucose amended continuous flow culture at slow (D = 0.025 h(-1)) or fast (D = 0.27 h(-1)) dilution rates. The bacterium was grown in LB minimal medium (pH 6.25) containing no antibiotics. Upon achieving steady state, samples were plated to tryptic soy agar (TSA) alone or supplemented (per ml) with 2 and 16 microg oxytetracycline, 4 and 16 microg tetracycline, 2 and 64 microg kanamycin, and 0.25 and 2 microg enrofloxacin. Regardless of growth rate, CFU of resistant ST from the TSA containing antibiotics was less than 2 x 10(1) except for 2 microg kanamycin and 0.25 microg enrofloxacin treatments (higher than 1 x 10(9) and 4 x 10(7) CFU of resistant ST for trials 1 and 2, respectively). Frequency of recovering resistant ST from the TSA containing the higher antibiotic concentrations was less than 1 in 10(9) for all antibiotics, but was higher on the media containing 2 microg kanamycin and 0.25 microg enrofloxacin at both slow and fast growth rates. In general, minimal susceptibility differences were detected for isolates from slow and fast dilution rates.     

Copper regulation and homeostasis of Daphnia magna and Pseudokirchneriella subcapitata: influence of acclimation

This study aimed to evaluate (1) the capacity of the green alga Pseudokirchneriella subcapitata and the waterflea Daphnia magna to regulate copper when exposed to environmentally realistic copper concentrations and (2) the influence of multi-generation acclimation to these copper concentrations on copper bioaccumulation and homeostasis. Based on bioconcentration factors, active copper regulation was observed in algae up to 5 microg Cu L(-1) and in daphnids up to 35 mug Cu L(-1). Constant body copper concentrations (13+/-4 microg Cu g DW(-1)) were observed in algae exposed to 1 through 5 microg Cu L(-1) and in daphnids exposed to 1 through 12 microg Cu L(-1). At higher exposure concentrations, there was an increase in internal body copper concentration, while no increase was observed in bioconcentration factors, suggesting the presence of a storage mechanism. At copper concentrations of 100 microg Cu L(-1) (P. subcapitata) and 150 microg Cu L(-1) (D. magna), the significant increases observed in body copper concentrations and in bioconcentration factors may be related to a failure of this regulation mechanism. For both organisms, internal body copper concentrations lower than 13 microg Cu g DW(-1) may result in copper deficiency. For P. subcapitata acclimated to 0.5 and 100 microg Cu L(-1), body copper concentrations ranged (mean+/-standard deviation) between 5+/-2 microg Cu g DW(-1) and 1300+/-197 microg Cu g DW(-1), respectively. For D. magna, this value ranged between 9+/-2 microg Cu g DW(-1) and 175+/-17 microg Cu g DW(-1) for daphnids acclimated to 0.5 and 150 microg Cu L(-1). Multi-generation acclimation to copper concentrations >or =12 microg Cu L(-1) resulted in a decrease (up to 40%) in body copper concentrations for both organisms compared to the body copper concentration of the first generation. It can be concluded that there is an indication that P. subcapitata and D. magna can regulate their whole body copper concentration to maintain copper homeostasis within their optimal copper range and acclimation enhances these mechanisms.     

SI-traceable certification of Cu, Cr, Cd and Pb in sediment and fly ash candidate reference materials

Many fields in environmental analytical chemistry deal with very low limits and thresholds as set by governmental legislations or transnational regulations. The need for the accuracy, comparability and traceability of analytical measurements in environmental analytical chemistry has significantly increased and total uncertainties are even asked for by accreditation bodies of environmental laboratories. This paper addresses achieving these goals to guarantee accuracy, quality control, quality assurance or validation of a method by means of certified reference materials. The assessment of analytical results in certified reference materials must be as accurate as possible and every single step has to be fully evaluated. This paper presents the SI-traceable certification of Cu, Cr, Cd and Pb contents in geological and environmentally relevant matrices (three sediments and one fly ash sample). Certification was achieved using isotope dilution (ID) ICPMS as a primary method of measurement. In order to reduce significantly the number of analytical steps and intermediate samples a multiple spiking approach was developed. The full methodology is documented and total uncertainty budgets are calculated for all certified values. A non-element specific sample digestion process was optimised. All wet chemical digestion methods examined resulted in a more or less pronounced amount of precipitate. It is demonstrated that these precipitates originate mainly from secondary formation of fluorides (essentially CaF2) and that their formation takes place after isotopic equilibration. The contribution to the total uncertainty of the final values resulting from the formation of such precipitates was in general < 0.1% for all investigated elements. Other sources of uncertainty scrutinised included the moisture content determination, procedural blank determination, cross-contamination from the different spike materials, correction for spectral interferences, instrumental background and deadtime effects, as well as the use of either certified values or IUPAC data in the IDMS equation. The average elemental content in the sediment samples was 30-130 micrograms g-1 for Pb, 0.5-3 micrograms g-1 for Cd and 50-70 micrograms g-1 for Cu. Cr was measured in one sample and was about 60 micrograms g-1. The concentrations in the fly ash sample were up to 2 orders of magnitude higher. Expanded uncertainty for the investigated elements was about 3% (coverae factor k = 2) except for Cr, (measured by high resolution ICPMS), for which the expanded uncertainty was about 7% (k = 2).     

Dispersion of the vapour cloud in the Buncefield Incident

Dispersion of the flammable vapour cloud in the 2005 Buncefield Incident is examined. Footage from security cameras around the site is analysed and the results from Computational Fluid Dynamics (CFD) simulations of the vapour dispersion are presented. It is shown that the shape of the terrain and the presence of obstacles significantly affected the dispersion of vapour from the overflowing tank. The CFD model is shown to produce similar qualitative behaviour to that observed in the incident, both in terms of the arrival time of the vapour cloud and its final depth.     

Biodegradation of phenol by native microorganisms isolated from coke processing wastewater

The present investigation was undertaken to assess the biodegradation of phenol by native bacteria strains isolated from coke oven processing wastewater. The strains were designated ESDSPB1, ESDSPB2 and ESDSPB3 and examined for colony morphology Gram stain characters and biochemical tests. Phenol degrading performance of all the strains was evaluated initially. One of the strains namely ESDSPB2 was found to be highly effective for the removal of phenol, which was used as sole carbon and energy source. From an initial concentration of 200 mg I(-1) it degraded to 79.84 +/- 1.23 mg l(-1). In turn the effect of temperature (20 to 45 degrees C), pH (5-10) and glucose concentration (0, 0.25 and 0.5%) on the rate of phenol degradation by that particular strain was investigated. Observations revealed that the rate of phenol biodegradation was significantly affected by pH, temperature of incubation and glucose concentration. The optimal conditions for phenol removal were found to be pH of 7 (84.63% removal), temperature, 30 degrees C (76.69% removal) and 0.25% supplemented glucose level (97.88% removal). The main significance of the study is the utilization of native bacterial strains from the waste water itself having potential of bioremediation.     

Toxizität und Risk Assessment fluvialer Sedimente und Schwebstoffe: Eine kurze Übersicht bisheriger und neuerer Entwicklungen

Background In recent years, sediments have become a central topic of scientific and public discussion as an important factor for determining water quality. While the quality of surface waters in Germany has significantly improved during the past years, highly contaminated sediments still create a considerable threat to the quality of several European catchment areas. Main features Here, we summarize different concepts and methods for the assessment of sediment quality and report on some novel integrative test methods for assessing sediment toxicity including contaminant re-mobilization during simulated re-suspension events. Results and discussion Currently, different approaches for assessment of sediment pollution exist. While instrumental chemical analyses are not suitable to accurately describe sediment toxicity, combinations of biological and chemical test procedures and integrated approaches, for example weight-of-evidence studies and effect-directed analysis (EDA), have the potential to identify key contaminants. Inter-disciplinary studies combining hydrodynamic and toxicological aspects coupled to real exposure of aquatic organisms to contaminants are currently being developed. Conclusions Monitoring and assessment of sediment quality are of increasing importance, not only for national legislation but also for the implementation of the European Water Framework Directive (WFD). Integrated approaches for the determination of sediment stability play a key role in the appropriate sediment-monitoring strategies.