Geochemical investigations of metals release from submerged coal fly ash using extended elutriate tests

A storage pond dike failure occurred at the Tennessee Valley Authority Kingston Fossil Plant that resulted in the release of over 3.8 million cubic meters (5 million cubic yards) of fly ash. Approximately half of this material deposited in the main channel of the Emory River, 3.5 km upstream of the confluence of the Emory and Clinch Rivers, Tennessee, USA. Remediation efforts to date have focused on targeted removal of material from the channel through hydraulic dredging, as well as mechanical excavation in some areas. The agitation of the submerged fly ash during hydraulic dredging introduces river water into the fly ash material, which could alter the redox state of metals present in the fly ash and thereby change their sorption and mobility properties. A series of extended elutriate tests were used to determine the concentration and speciation of metals released from fly ash. Results indicated that arsenic and selenium species released from the fly ash materials during elutriate preparation were redox stable over the course of 10d, with dissolved arsenic being present as arsenate, and dissolved selenium being present as selenite. Concentrations of certain metals, such as arsenic, selenium, vanadium, and barium, increased in the elutriate waters over the 10d study, whereas manganese concentrations decreased, likely due to oxidation and precipitation reactions.     

Effect of chlorsulfuron on growth of submerged aquatic macrophyte Potamogeton pectinatus (sago pondweed)

Research has been conducted on the effect of chlorsulfuron on non-target plants but little information is available on its effects on aquatic macrophytes. Potamogeton pectinatus (sago pondweed) is an ecologically important submerged aquatic macrophyte found in freshwater bodies. Many species of wildlife use this plant as a food source. The objective of this study was to measure the phytotoxic effects of chlorsulfuron on sago pondweed. P. pectinatus plants were exposed to chlorsulfuron at 0, 0.25, 0.50, 1.0, or 2.0 ppb, in an environmental growth chamber. Plants exposed to 0.25 ppb chlorsulfuron showed a reduction in length (76%), number of leaves (50%), and number of stems (50%), compared to control plants. A reduction (47%) was also observed in the length of stems produced by plants treated with > or = 0.50 ppb chlorsulfuron. Significant reductions in wet and dry weights, and increased mortality were observed on treatments with > or = 1.0 ppb chlorsulfuron.     

Assessment of organic contaminant fate in waste water treatment plants. I: Selected compounds and physicochemical properties

An extensive and comprehensive literature review has been conducted for compounds which we hypothesise could be present in sludge and maintain their integrity following application to agricultural land. The following compounds have been selected for review; chlorinated paraffins, quintozene, brominated diphenyl ethers, polychlorinated naphthalenes, polydimethylsiloxanes, chloronitrobenzenes, and a range of biologically active and pharmaceutical compounds. All have received interest as a result of their persistence and/or toxicity in environmental media. Physicochemical property information has also been compiled and/or calculated. In this way, an accompanying paper will attempt to predict compound fate in waste water treatment plants (WWTPs) and assess likely transfers from soil/plants to grazing livestock. These papers describe a first attempt to predict the fate of these classes of compounds in the environment and prioritise those of greatest concern.     

A field study of the generation of nitrate in a hill cap cloud

A field experiment to investigate the formation of nitrate as an airstream passes through a hill cap cloud has been performed at the UMIST field station on Great Dun Fell. It has been shown that the aerosol nitrate concentration increased by about 0.5 microg m(-3) as the airstream passed through the cloud during the night. At sunrise the nitrate production disappeared. It is suggested that the most likely mechanism for this nitrate production was due to the solution of N2O5 and NO3 formed from the reaction of NO2 with O3. These higher oxides build up overnight in the absence of short wave radiation to photolyse them. Other possible mechanisms of nitrate production are also discussed.     

The removal of arsenate from water using iron-modified diatomite (D-Fe): isotherm and column experiments

Iron hydroxide supported onto porous diatomite (D-Fe) is a low-cost material with potential to remove arsenic from contaminated water due to its affinity for the arsenate ion. This affinity was tested under varying conditions of pH, contact time, iron content in D-Fe and the presence of competitive ions, silicate and phosphate. Batch and column experiments were conducted to derive adsorption isotherms and breakthrough behaviours (50 μg L^?1) for an initial concentration of 1,000 μg L^?1. Maximum capacity at pH 4 and 17 % iron was 18.12–40.82 mg of arsenic/g of D-Fe and at pH 4 and 10 % iron was 18.48–29.07 mg of arsenic/g of D-Fe. Adsorption decreased in the presence of phosphate and silicate ions. The difference in column adsorption behaviour between 10 % and 17 % iron was very pronounced, outweighing the impact of all other measured parameters. There was insufficient evidence of a correlation between iron content and arsenic content in isotherm experiments, suggesting that ion exchange is a negligible process occurring in arsenate adsorption using D-Fe nor is there co-precipitation of arsenate by rising iron content of the solute above saturation.     

Modelling the fate of persistent organic pollutants in Europe: parameterisation of a gridded distribution model

A regionally segmented multimedia fate model for the European continent is described together with an illustrative steady-state case study examining the fate of gamma-HCH (lindane) based on 1998 emission data. The study builds on the regionally segmented BETR North America model structure and describes the regional segmentation and parameterisation for Europe. The European continent is described by a 5 degrees x5 degrees grid, leading to 50 regions together with four perimetric boxes representing regions buffering the European environment. Each zone comprises seven compartments including; upper and lower atmosphere, soil, vegetation, fresh water and sediment and coastal water. Inter-regions flows of air and water are described, exploiting information originating from GIS databases and other georeferenced data. The model is primarily designed to describe the fate of Persistent Organic Pollutants (POPs) within the European environment by examining chemical partitioning and degradation in each region, and inter-region transport either under steady-state conditions or fully dynamically. A test case scenario is presented which examines the fate of estimated spatially resolved atmospheric emissions of lindane throughout Europe within the lower atmosphere and surface soil compartments. In accordance with the predominant wind direction in Europe, the model predicts high concentrations close to the major sources as well as towards Central and Northeast regions. Elevated soil concentrations in Scandinavian soils provide further evidence of the potential of increased scavenging by forests and subsequent accumulation by organic-rich terrestrial surfaces. Initial model predictions have revealed a factor of 5-10 underestimation of lindane concentrations in the atmosphere. This is explained by an underestimation of source strength and/or an underestimation of European background levels. The model presented can further be used to predict deposition fluxes and chemical inventories, and it can also be adapted to provide characteristic travel distances and overall environmental persistence, which can be compared with other long-range transport prediction methods.     

Phytoremediation of petroleum hydrocarbons in tropical coastal soils II. microbial response to plant roots and contaminant

Goal, Scope and Background.  The goal of this study was to understand the interaction between plants and microorganisms during petroleum-hydrocarbon bioremediation in Pacific Islands coastal soils. Total bacteria and hydrocarbon-degrading microorganisms population dynamics were examined in the rhizospheres of tropical trees and shrubs, which were evaluated for their phytoremediation potential in a greenhouse experiment. The respective and combined effects of plant roots and diesel contaminant on the microbial populations were determined in relation to diesel fuel depletion. An increase in the size of the hydrocarbon-degrading populations of microbes, elicited by rhizodeposition, is generally regarded as conducive to an enhanced degradation of petroleum hydrocarbon polutants in veaetated soil. Conclusion  The results suggest the quality of the rhizodeposition is plant-dependent and governs the type of diesel-degrader populations that will be enhanced by a given plant. Recommendations and Outlook  In the proposed phytoremediation-benefit model plant roots maintain high levels of hydrocarbon de-graders in uncontaminated soil. When the root enters a contaminated zone of soil, those hydrocarbon degraders that prefer the contaminant would switch to the contaminant as a carbon source, effectively removing the hydrocarbons. If the root exudates and the contaminant are equally attractive to the hydrocarbon degraders, the contaminant degradation would be less effective.