Population dynamics and growth of juveniles of the velvet swimming crab Necora puber (Decapoda: Portunidae)

Recruitment variability plays a critical role in determining local population densities of benthic organisms, but extreme vulnerability at the onset of juvenile life is a trait that is largely responsible for population survivorship trends. The aim of the present study was to determine the role of juvenile recruitment in the population structure of Necora puber. Juveniles of N. puber were collected from the lower intertidal of rocky shores of Plymouth Sound (southwest coast of the UK) and monthly size–frequency distribution were used to determine the dynamics and the growth of the population. The parameters of the von Bertalanffy growth function were estimated (K=0.281 year⁻¹; t ₀=0.043; C=0.103; and t _s=0.268) assuming a L _∞=105 mm. Growth was markedly seasonal and present results indicated a slower juvenile growth rate than described previously for N. puber. The recruitment period was extensive and was two times higher in 2001 than in 2000 at the start of the 1+ year, but levelled off at the end of the 1+ year class on three of the four shores studied. Instantaneous mortality as high as 5.1 year⁻¹(99.4% year⁻¹) was observed during the higher recruitment year. Early juvenile mortality appears to be density dependent and a demographic bottleneck appears to limit the number of juveniles on some shores.     

The Surface Roughness of a Rubber Soling Material Determines the Coefficient of Friction on Water-Lubricated Surfaces

For more than a decade, evidence has been accumulating that points to the fact that the microscopic roughness of the footwear soling surface is a major determinant of slip-resistance on lubricated surfaces, but conclusive experimental proof has been lacking. This article describes an experiment in which five pairs of shoes were soled with the same rubber compound. Four of the pairs were abraded by different grades of grit to produce a range of roughness values. The coefficient of friction (CoF) of the five solings was then measured repeatedly by the walking traction method on wet surfaces including glazed wall tiles, vinyl asbestos coated with the wax floor polish, and both sides of a sheet of float glass. The Kruskal-Wallis statistical test proved beyond doubt that the soling roughness is a major factor in determining the CoF of this rubber soling material; p < 10⁻⁵. Nearly all of the grip was due to surface roughness of the soling material on these atypically smooth floors, although the surface roughness of the floors also had a significant effect on CoF; p < 0.003. Float glass is shown to be a promising reference floor material for the measurement of CoF of footwear; there was no statistical difference between results for the two sides of the glass sheet. Float glass could be used in the development of a standard CoF test method because new sheets of glass from the same manufacturer are identical and extremely smooth. The specification of CoF values for solings/floors combinations in lubricated conditions is of little value unless associated with roughness measurements and knowledge of how wear will affect the surface roughness of the sole. This article reports the first evidence that any specification of flooring by measuring CoF based on dry surfaces could lead to an increase in the number of injuries caused by slipping on the wet surfaces. Published by Elsevier Science Ltd     

A congener-specific PCDD/F emissions inventory for the UK: do current estimates account for the measured atmospheric burden?

Considerable effort has been expended in the UK and elsewhere to quantify and rank PCDD/F primary sources and emissions to the environment, principally the atmosphere, so that cost-effective source reduction measures can be taken. Here, we predict a congener-specific emissions inventory for primary and secondary nondioxin-regulated sources to the UK atmosphere, estimated to have ranged from 3 to 22 kg in 1996. The inventory profile is dominated by OCDD (approximately 30-40%), 1,2,3,4,6,7,8-HpCDD (approximately 15-19%) and 1,2,3,4,6,7,8-HpCDF (approximately 14-19%). Congeners 2,3,4,7,8-PeCDF and 1,2,3,7,8-PeCDD dominate the sigmaTEQ composition. Mass balance modelling suggests that the predicted congener pattern in UK air (based on the emission inventory) is similar to observed measurements, with absolute concentrations being estimated within a factor of 2 for most congeners. Calculations taking into account atmospheric weathering processes and long range (advective) transport suggest that PCDD/F sources to ambient air are primarily ongoing and that atmospheric mixing will mask individual emission source profiles/identities. This supports measured evidence for the consistency of PCDD/F air profiles observed around the UK throughout the year.     

Mechanism of effective nocardioform foam control measures for non-selector activated sludge systems.

Solids retention time (SRT), biological scum trapping and recycle, and the dynamic equilibrium between Nocardioform populations in the foam and the mixed liquor are the controlling factors in activated sludge foaming events caused by Nocardioform bacteria. For the operating modes described in this paper, a cured mixed liquor foaming condition (filament counts of approximately 10(5) intersections/g volatile suspended solids) was only achieved when SRT control, selective wasting, and polymer addition were in effect. Solids retention time control, with the SRT remaining below 1.5 days, and selective wasting will cure a severely foaming mixed liquor, but effects will only be observed after 3 or 4 months after implementation. The combined wastage of Nocardioform bacteria from selective wasting and SRT control can ensure long-term foam control to the operation of a pure-oxygen activated sludge system with foam-trapping features. An SRT of 0.3 days will result in the complete washout of Nocardioform bacteria from the activated sludge system, which can then operate at an SRT of 3 days free of Nocardioform. Polymer addition to mixed liquor is only effective for foam control when a large portion of the system biomass exists as a heavy layer of foam above the mixed liquor.     

Quantification of PCDD/F concentrations in animal manure and comparison of the effects of the application of cattle manure and sewage sludge to agricultural land on human exposure to PCDD/Fs

PCDD/Fs were quantified in samples of cattle, pig, sheep and chicken manure. TEQs ranged from 0.19 ng TEQ/kg dw for the pig manure to 20 ng TEQ/kg dw for one cattle manure sample. Exposure assessments were carried out to compare the effect of various sewage sludge and cattle manure land application scenarios on human PCDD/F exposure. Background exposure was estimated at 4.9 pg TEQ/kg bw/day and it was found that land application of sewage sludge and cattle manure at contemporary rates did not increase PCDD/F TEQ background exposure. It was concluded that the application of sewage sludge, under the new UK guidelines, and cattle manure to agricultural land, do not make a significant contribution to human exposure to PCDD/Fs.     

Bioavailability of persistent organic pollutants in soils and sediments--a perspective on mechanisms, consequences and assessment

It has been observed that as soil-pollutant contact time increases, pollutant bioavailability and extractability decreases. This phenomenon has been termed 'ageing'. Decreased chemical extractability with increased soil-chemical contact time is evident where both 'harsh' techniques, e.g. dichloromethane Soxhlet extraction, and 'non-exhaustive' techniques, e.g. butanol shake extraction, have been used. It has also been observed that the amount of chemical extracted by these techniques varies considerably over time. Similarly, decreases in bioavailability with increased soil-pollutant contact time have been described in bacterial, earthworm and other organism studies. From these investigations, it has been shown that the fraction of pollutant determined to be bioavailable can vary between organisms. Thus, there is an immediate definition problem, what is bioavailability? Additionally, if bioavailability is to be assessed by a chemical means, which organisms should (or can) be mimicked by the extraction procedure? This review provides a background to the processes inherent to ageing, a discussion of its consequences on bioavailability and ends with some reflections on the appropriateness of chemical extraction techniques to mimic bioavailability     

The distribution of metals in the forest floor of aged conifer stands at a plantation in Northern England

The distribution of the elements Cd, Cr, Cu, Mn, Ni, Pb, Sr, V and Zn has been examined in the horizons of soils under aged Sitka spruce (Picea sitchensis (Bong.) Carr.) stands at a plantation in Northern England. The stands are under first-generation cultivation and are up to 33 years old. Cadmium, Mn, Pb and Zn concentrations were consistently higher in the organic layers than in the underlying mineral soil. This contrasted with the situation for Sr and V. Cadmium, Pb and Zn all showed an increase in concentration in the L + F horizons with stand age and a corresponding increase in the difference between L + F horizon concentrations. Soil pH declined with increasing stand age. Cadmium, Cr, Pb and Zn were all present at higher concentrations in the F horizon than in any other, while Cu and Ni were relatively constant through all the horizons studied. For all nine elements, the H horizon was the largest store of the three organic layers. Calculated rates of accumulation of Cd, Pb and Zn in the L + F horizons gave good agreement with estimated regional atmospheric deposition rates. In comparison to atmospheric deposition, biological mobilisation and deposition of Cd, Pb and Zn make a relatively minor contribution to the surface soil metal burden. Cadmium appeared to be the most readily leached of these three metals from the forest floor, although some transfer of atmospherically-derived Pb to the H+ soil horizons was indicated.     

Metabolism and body-burden of PCBs in lactating dairy cows.

This paper uses data from a detailed 4 month PCB mass balance study on lactating cows fed a naturally contaminated background diet to quantify the metabolism and body-burdens of a range of PCB congeners. Dietary intake fluxes and milk and faecal output fluxes reported previously are combined with subcutaneous fat and blood PCB concentrations and with data from tissue/organ samples from a slaughtered animal to estimate the degree of metabolism within the cow. A total body burden is derived, showing that fat deposits account for approximately 98% of total PCB present in the lactating cow. The daily intake through feed (ng day-1) accounted for between 0.9 and 1.5% of the total body burden for persistent congeners (e.g. PCB 153) and up to 43% for those congeners which are readily metabolised (e.g. PCB 52). Detailed balances for a range of tri- to octa-chlorinated PCBs are presented and clearly demonstrate that many congeners are metabolised effectively by lactating dairy cows (e.g. PCB 149) whilst others are efficiently transferred to human dairy food products. An approach to predicting the degree of metabolism for individual PCB congeners is presented which gives good agreement with observations.     

Chemical fractionation of copper, lead and zinc in ombrotrophic peat

Measurement of operationally defined chemical fractions in ombrotrophic peat samples provides information not obtained by total metal extractions. Examination of such sequential data permits interpretation of process dynamics. Results for copper, lead and zinc chemical fractionation of peat profiles from Ringinglow Bog, near Sheffield, Great Britain, are reported and discussed. Lead and zinc share similar patterns of partitioning. A considerable proportion of these records is in a form predisposed to transformation and mobilisation. In contrast, much of the copper is comparatively immobile, it being associated with the more chemically intractable fractions. The results suggest that peat copper deposition records may be used for reconstruction of pollution history. The use of lead and zinc records for these purposes is problematic.