Passenger head kinematics in abrupt braking and lane change events

Abstract

Objective: A test track study was conducted to quantify patterns of adult front seat passenger head motion during abrupt vehicle maneuvers.

Method: Eighty-seven men and women with a wide range of body sizes and ages participated in data collection on a closed test track in a passenger sedan under manual control by a test driver. Because a primary goal of the study was to gather “unaware” data, the participants were instructed that the study was concerned with vehicle dynamics and they were required to read from a questionnaire taped to the top of their thighs as the drive began. The first event was a hard brake (approximately 1 g) to a stop from 35?mph (56 kph). Within the space of approximately 5?min the participants also experienced an aggressive lane change, a sharp right turn with simultaneous hard braking, and a second hard braking event. A Microsoft Kinect v2 sensor was positioned to view the area around the front passenger seat. Head location was tracked using the Kinect data with a novel methodology that fit 3D head scan data to the depth data acquired in the vehicle.

Result: The mean (standard deviation) forward excursion of the estimated head center of gravity (CG) location in the first braking event was 135 (62) mm. The forward head CG excursion in the second braking event of 115 (51) mm was significantly less than that in the first, but the difference was small relative to the within-condition variance. Head excursion on the second braking trial was less than that on the first trial for 69% of participants. The mean maximum inboard head excursion in lane-change maneuvers was 118 (40) mm. Forward head excursions in braking were significantly smaller for older passengers and those with higher body mass index, but the combined factors accounted for less than 25% of the variance. Inboard head excursion in the lane-change event was significantly related to stature, but only about 7% of variance was related to body size. Head excursions for men and women did not differ significantly after accounting for body size.

Discussion: This is the first quantitative occupant dynamics study to use a large, diverse sample of passengers, enabling the exploration of the effects of covariates such as age and body size.

Conclusions: The data demonstrate that a relatively large range of head positions can be expected to result from abrupt vehicle maneuvers. The data do not support simple scaling of excursions based on body size.     

Geochemical investigations of metals release from submerged coal fly ash using extended elutriate tests

A storage pond dike failure occurred at the Tennessee Valley Authority Kingston Fossil Plant that resulted in the release of over 3.8 million cubic meters (5 million cubic yards) of fly ash. Approximately half of this material deposited in the main channel of the Emory River, 3.5 km upstream of the confluence of the Emory and Clinch Rivers, Tennessee, USA. Remediation efforts to date have focused on targeted removal of material from the channel through hydraulic dredging, as well as mechanical excavation in some areas. The agitation of the submerged fly ash during hydraulic dredging introduces river water into the fly ash material, which could alter the redox state of metals present in the fly ash and thereby change their sorption and mobility properties. A series of extended elutriate tests were used to determine the concentration and speciation of metals released from fly ash. Results indicated that arsenic and selenium species released from the fly ash materials during elutriate preparation were redox stable over the course of 10d, with dissolved arsenic being present as arsenate, and dissolved selenium being present as selenite. Concentrations of certain metals, such as arsenic, selenium, vanadium, and barium, increased in the elutriate waters over the 10d study, whereas manganese concentrations decreased, likely due to oxidation and precipitation reactions.     

Estimation of NH3 bi-directional flux from managed agricultural soils

The Community Multi-Scale Air Quality model (CMAQ) is used to assess regional air quality conditions for a wide range of chemical species throughout the United States (U.S.). CMAQ representation of the regional nitrogen budget is limited by its treatment of ammonia (NH₃) soil emission from, and deposition to underlying surfaces as independent rather than tightly coupled processes, and by its reliance on soil emission estimates that do not respond to variable meteorology and ambient chemical conditions. The present study identifies an approach that addresses these limitations, lends itself to regional application, and will better position CMAQ to meet future assessment challenges. These goals were met through the integration of the resistance-based flux model of Nemitz et al. (2001) with elements of the United States Department of Agriculture EPIC (Environmental Policy Integrated Climate) model. Model integration centers on the estimation of ammonium and hydrogen ion concentrations in the soil required to estimate soil NH₃ flux. The EPIC model was calibrated using data collected during an intensive 2007 field study in Lillington, North Carolina. A simplified process model based on the nitrification portion of EPIC was developed and evaluated. It was then combined with the Nemitz et al. (2001) model and measurements of near-surface NH₃ concentrations to simulate soil NH₃ flux at the field site. Finally, the integrated flux (emission) results were scaled upward and compared to recent national ammonia emission inventory estimates. The integrated model results are shown to be more temporally resolved (daily), while maintaining good agreement with established soil emission estimates at longer time-scales (monthly). Although results are presented for a single field study, the process-based nature of this approach and NEI comparison suggest that inclusion of this flux model in a regional application should produce useful assessment results if nationally consistent sources of driving soil and agricultural management information are identified.     

Evaluation of a diode laser based photoacoustic instrument combined with preconcentration sampling for measuring surface–atmosphere exchange of ammonia with the aerodynamic gradient method

We present here a novel instrument for measuring surface–atmosphere exchange fluxes of ammonia. The instrument is the upgraded version of a recently developed near-infrared diode laser based photoacoustic ammonia concentration monitoring instrument, i.e. the original instrument is supplemented with two additional sampling lines, an appropriate gas handling system and an advanced software controlling gradient measurements. As a result of these developments, ammonia concentration can be measured simultaneously at three different heights above the ground and ammonia fluxes can be calculated from these data using the aerodynamic gradient method. The instrument operates fully automatically, requires minimal maintenance and has a temperature controlled, waterproof housing which makes it suitable for measurements even under harsh field conditions. Preliminary tests on stability and accuracy were carried out during two two-week field measurement campaigns, with the three sampling inlets being placed at the same height together with the inlet of a reference instrument. The readings of the three channels agreed well (with correlation coefficients above 0.96). Comparison to reference instruments showed good stability of the photoacoustic instrument, there was no measurable zero-drift or change in sensitivity during the tests. Flux measurements were carried out during a three-week field campaign in southern Scotland over fertilized grassland with reference to a wet-chemical AMANDA instrument in gradient configuration. Ammonia fluxes calculated from the data of the two instruments agreed well. Fluxes up to 2500 ng m^?2 s^?1 were observed after fertilization. The minimum detectable ammonia flux was calculated on the basis of “virtual ammonia fluxes”, from measurements carried out with all inlets at the same height and was found to be ±60 ng m^?2 s^?1 which ensures reliable measurements above intensively managed grasslands or agricultural fields.     

Verifying emission factors and national POPs emission inventories for the UK using measurements and modelling at two rural locations

Different approaches are used to verify the adequacy of emission factors (EFs) and their use in emission inventories of persistent organic pollutants (POPs). The applicability of EFs was tested using atmospheric dispersion modelling to predict atmospheric concentrations of polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and resulting toxic equivalents (SigmaTEQ) and particulate matter <10 microm (PM(10)) in two rural locations in northern England (UK). The modelling was based on general assumptions of fuel composition, consumption and heating needs to simulate emissions of POPs from the domestic burning of coal and wood where ambient measurements were made in the winter of 1998. The model was used to derive the local contribution to ambient air concentrations, which were estimated independently based on comparative air measurements. The results support the hypothesis that in both villages, the majority of PAHs and the lower chlorinated PCDFs were locally released. The situation for PCBs and polychlorinated naphthalenes (PCNs) was different. While the EFs show the release of both compound groups from the domestic burning of coal and wood, the ambient levels of these "legacy POPs" in the villages were still clearly dominated by other sources. Rural areas relying mainly on fossil fuels can exceed the proposed UK ambient air quality standard for benzo[a]pyrene during winter. The measured EFs were then used to estimate the importance of the domestic burning of coal and wood to national emission inventories for these compound classes. Extrapolations to the UK suggest that the domestic burning of pure wood and coal were minor emitters for chlorinated POPs but contributed strongly to PAH and PM(10) levels in 2000. Finally, the UK's national POPs emission inventories based on source inventories and EF, as used here, were compared to estimates derived using the increase in atmospheric concentration of selected POPs.     

The mediating role of overall fairness and the moderating role of trust certainty in justice–criteria relationships: the formation and use of fairness heuristics in the workplace

Theory suggests that perceptions of overall fairness play an important role in the justice judgment process, yet overall fairness is insufficiently studied. We derived hypotheses from fairness heuristic theory, which proposes that perceptions of overall fairness are influenced by different types of justice, are more proximal predictors of responses than specific justice types, and are used to infer trust when trust certainty is low. Results from Study 1 (N = 1340) showed that employees' perceptions of overall fairness in relation to a senior management team mediated the relationships between specific types of justice and employee outcomes (e.g., affective commitment). In Study 2 (N = 881), these mediated effects were replicated and trust certainty moderated the effect of overall fairness on trust as hypothesized. Study 2 also showed that, relative to procedural and informational justice, distributive and interpersonal justice had stronger effects on overall fairness. To explore how the organizational context may have influenced these findings, we performed qualitative analyses in Study 3 (N = 268). Results suggested that, consistent with the quantitative findings from Study 2, some types of justice were more salient than others. We discuss the implications of our findings for theory, research, and practice. Copyright © 2008 John Wiley & Sons, Ltd.     

Calculating the life extension achieved by reducing nuclear accident frequency

Improvements in nuclear safety are often achieved through introducing a new safety measure that reduces the frequency of a hazardous accident rather than its consequences. To carry out a J-value analysis, it is necessary to calculate how a reduction in accident frequency extends the life expectancy of the potentially exposed group of people. The paper presents two methods for calculating the loss of life expectancy associated with accidents of a certain severity occurring with a defined frequency. The first begins by using an equivalent, prolonged radiation exposure to represent the effects of the accident occurring once per year over the given period of operation. The resultant loss of life expectancy is then scaled by multiplying by the frequency of occurrence. The second method calculates the loss of life expectancy brought about by a single accident occurring during the given period of operation and scales this by multiplying by both the length of the operational period and the frequency of occurrence. Results derived using the first method show that there is a relatively small effect on loss of life expectancy per accident if several accidents are assumed to occur during a typical period of operation. This conclusion permits a simple assessment of the effect of possible, multiple accidents. The accuracy of the second method is found not to be compromised materially by ignoring the possibility of multiple accidents. The second method is shown to be slightly more conservative than the first, and also somewhat more accurate. Calculations of the loss of life expectancy may be carried out before and after the new safety improvement has been implemented, and the difference between the two results will be the life extension brought about by the new safety measure.     

Incorporating the 2007 recommendations of the International Commission on Radiation Protection into the J-value analysis of nuclear safety systems

The newly released findings by the International Commission on Radiation Protection (ICRP) led to a review of the lifetime risk coefficients for fatal cancer used in J-value analysis of nuclear safety systems. The change in life expectancy a safety system brings about by averting a radiation exposure needs to be estimated in order to calculate the safety system's J-value, and this is done following the ICRP's practice of using risk coefficients that are uniform across both genders and all ages in the defined population group (either workers or the general population). The ICRP predicted uniformly lower radiation risks in 2007 than in 1990 on a like-for-like basis, but it was found that the ICRP's new risk coefficients needed to be multiplied by a compensating factor specific to each population when used in calculating the radiation-induced change in life expectancy. Incorporating the new compensating factor leads to a decrease in the J-value calculated of about 5% for workers and 15% for the general population compared with earlier, reported results. These adjustments are not large compared with the uncertainties associated with radiation harm and the economics of installing a safety system, but will strengthen slightly the case for spending on a nuclear safety measure.     

Development of microbial degradation of cypermethrin and diazinon in organically and conventionally managed soils

The behaviour of pesticides in the soil is a complex issue and is controlled by the physical, chemical and biological properties of the soil. The ability of microorganisms to degrade pesticides is not only controlled by the bioavailability of a chemical but also by their capacity to develop the ability to utilise available chemicals. The development of catabolism in the indigenous soil microflora of four organically and one conventionally managed soils was investigated for two pesticides: cypermethrin and diazinon. Soils were amended with cypermethrin and diazinon and aged for 0, 2, 4, 6, 8, and 14 weeks and, at each time point, mineralisation of freshly added 14C-cypermethrin or 14C-diazinon was measured by trapping 14CO2. In general, contact times between the soil and the pesticide resulted in a reduction in the lag phase (the period of time before mineralisation exceeded 5% of the added activity), followed by increases in the extent of mineralisation. Cypermethrin was mineralised significantly in all soils; whereas, diazinon was only appreciably mineralised in two of the soils, most notably in the organic soil from Redesdale. Statistical analysis showed pH and organic matter content of the soil had a significant effect on the extent of mineralisation (P< or = 0.05) of the cypermethrin in the soils.