Kinetics study on photochemical oxidation of polyacrylamide by ozone combined with hydrogen peroxide and ultraviolet radiation

An investigation on the process of ozone combined with hydrogen peroxide and ultraviolet radiation has been carried out in order to establish the kinetics for photochemical oxidation of polyacrylamide （PAM） in aqueous solution. Effects of operating parameters, including initial PAM concentration, dosages of ozone and hydrogen peroxide, UV radiation and pH value on the photochemical oxidation of PAM, have been studied. There was an increase in photochemical oxidation rate of PAM with increasing of dosages of 03, H2O2 and ultraviolet radiation. Upon increasing of the initial PAM concentration, the photochemical oxidation rate of PAM decreased. Slight effect of pH value on the photochemical oxidation rate of PAM was observed in the experiments. The kinetics equation for the photochemical oxidation of PAM by the system has been established.     

The impact of heavy metal pollution gradients in sediments on benthic macrofauna at population and community levels

The effect of sediment pollution on benthos was investigated in the vicinity of a large sewage treatment outflow at Incheon North Harbor, Korea. Animal size, vertical distribution and standard community parameters were analyzed along a 3 km transect line (n = 7). Univariate parameters showed a general trend of increasing species diversity with increasing distance from the pollution source. Multi-dimensional scaling analysis led to the clear separation of 3 locational groups, supporting gradient-dependent faunal composition. The innermost location was dominated by small sub-surface dwellers while the outer locations by large mid to deep burrowers. Looking for the size-frequency distribution, most abundance species (Heteromastus filiformis) showed the presence of larger size animals with increasing proximity to the pollution source. Meanwhile, species-specific vertical distributions, regardless of the pollution gradient, indicated that such shifts were due to species replacement resulting from a higher tolerance to pollutants over some species.     

Cesium and strontium sorption by selected tropical and subtropical soils around nuclear facilities

The dynamics of Cs and Sr sorption by soils, especially in the subtropics and tropics, as influenced by soil components are not fully understood. The rates and capacities of Cs and Sr sorption by selected subtropical and tropical soils in Taiwan were investigated to facilitate our understanding of the transformation and dynamics of Cs and Sr in soils developed under highly weathering intensity. The Langmuir isotherms and kinetic rates of Cs and Sr sorption on the Ap1 and Bt1 horizons of the Long-Tan (Lt) and the A and Bt1 horizons of the Kuan-Shan (Kt), Mao-Lin (Tml) and Chi-Lo (Cl) soils were selected for this study. Air-dried soil (<2 mm) samples were reacted with of 7.5 × 10⁻⁵ to 1.88 × 10⁻³ M of CsCl (pH 4.0) or 1.14 × 10⁻⁴ to 2.85 × 10⁻³ M of SrCl₂ (pH 4.0) solutions at 25 °C. The sorption maximum capacity (q_m) of Cs by the Ap1 and Bt1 horizons of the Lt soil (62.24 and 70.70 mmol Cs kg⁻¹ soil) were significantly (p < 0.05) higher than those by the A and Bt1 horizons of the Kt and Cl soils (26.46 and 27.49 mmol Cs kg⁻¹ soil in Kt soil and 34.83 and 29.96 mmol Cs kg⁻¹ soil in Cl soil, respectively), however, the sorption maximum capacity values of the Lt and Tml soils did not show significant differences. The amounts of pyrophosphate extractable Fe (Fe_p) were correlated significantly with the Cs and Sr sorption capacities (for Cs sorption, r² = 0.97, p < 1.0 × 10⁻⁴; for Sr sorption, r² = 0.82, p < 2.0 × 10⁻³). The partition coefficient of radiocesium sorbed on soil showed the following order: Cl soil ? Kt soil > Tml soil > Lt soil. It was due to clay minerals. The second-order kinetic model was applied to the Cs and Sr sorption data. The rate constant of Cs or Sr sorption on the four soils was substantiality increased with increasing temperature. This is attributable to the availability of more energy for bond breaking and bond formation brought about by the higher temperatures. The rate constant of Cs sorption at 308 K was 1.39-2.09 times higher than that at 278 K in the four soils. The activation energy of Cs and Sr sorbed by the four soils ranged from 7.2 to 16.7 kJ mol⁻¹ and from 15.2 to 22.4 kJ mol⁻¹, respectively. Therefore, the limiting step of the Cs⁺ or Sr²⁺ sorption on the soils was diffusion-controlled processes. The reactive components, which are significantly correlated with the Langmuir sorption maxima of Cs and Sr by these soils, substantially influenced their kinetic rates of Cs and Sr sorption. The data indicate that among components of the subtropical and tropical soils studied, short-range ordered sesquioxides especially Al- and Fe-oxides complexed with organics play important roles in influencing their capacity and dynamics of Cs and Sr sorption.     

Monitoring of environmental contaminants in raw bovine milk and estimates of dietary intakes of children in South Korea

Persistent organic pollutants (POPs) are ubiquitous residual contaminants in the environment and in the food chain. Milk is an important matrix for monitoring POP contamination. This study determined the concentrations of POPs including polybrominated diphenyl ethers (PBDEs), hexachlorobenzene (HCB), polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), and dioxin-like polychlorinated biphenyls (DL-PCBs) in raw bovine milk, and the data was used to estimate dietary intakes in South Korea. The average concentrations of PBDEs, HCB, PCDD/Fs, and DL-PCBs in raw milk were 0.29 ng g⁻¹ fat, 0.50 ng g⁻¹ fat, 0.27 pg TEQ g⁻¹ fat, and 0.33 pg TEQ g⁻¹ fat, respectively. No significant relationship was found between the concentrations of analytes and the regions sampled. The dietary intakes of PBDEs from the consumption of milk was calculated to be 0.26, 0.10, and 0.05 ng kg⁻¹ bw d⁻¹ for the group of ages 0–6, 7–12, and 13–19, respectively. The dietary intakes of HCB was calculated to be 0.44, 0.16, and 0.09 ng kg⁻¹ bw d⁻¹ for the group of ages 0–6, 7–12, and 13–19, respectively. The dietary intakes of PCDD/Fs and DL-PCBs was calculated to be 0.78, 0.29, and 0.16 pg TEQ kg⁻¹ bw d⁻¹ for the group of ages 0–6, 7–12, and 13–19, respectively. These results indicated that the residual levels of PBDEs, HCB, PCDD/Fs, and DL-PCBs in raw bovine milk were within safe levels.     

Gasification characteristics of sewage sludge combined with wood biomass

The gas products from gasification processes have been considered to have some limitations in gas composition and heating value from the previous studies. Gasification characteristics of sewage sludge and wood mixture were investigated using different mixing ratios with the purpose of better quality of gas product suitable for energy/power generation. The gasification experiment was performed by an indirectly heated fluidized bed reactor. As reaction temperature increased from 600 to 900 °C, the yield of gas product increased with higher generation of CO, H₂ and CH₄ by more activated gas conversion reactions. As the equivalence ratio increased from 0.2 to 0.4, composition ratio of CO₂ increased while CO, CH₄, H₂ decreased as expected. Several operating variables including mixing ratio of wood with dried sludge were also tested. From this initial stage of experiment, optimal operating conditions for the bubbling fluidized bed gasifier, could be considered 900 °C in temperature; 0.2 in equivalence ratio and 40 % in wood mixing ratio within test variables range. These results will be more thoroughly investigated for the application to the larger scale pilot system.     

Selective adsorption of phenanthrene dissolved in surfactant solution using activated carbon

Selective adsorption of a hazardous hydrophobic organic compound (HOC) by activated carbon as a means of recovering surfactants after a soil washing process was investigated. As a model system, phenanthrene was selected as a representative HOC and Triton X-100 as a nonionic surfactant. Three activated carbons that differed in size (Darco 20–40 (D20), 12–20 (D12) and 4–12 (D4) mesh sizes) were used in adsorption experiments. Adsorption of surfactant onto activated carbon showed a constant maximum above the critical micelle concentration, which were 0.30, 0.23, 0.15 g g⁻¹ for D20, D12, and D4, respectively. Selectivity for phenanthrene to Triton X-100 was much higher than 1 over a wide range of activated carbon doses (0–6 g l⁻¹) and initial phenanthrene concentrations (10–110 mg l⁻¹). Selectivity generally increased with decreasing particle size, increasing activated carbon dose, and decreasing initial concentration of phenanthrene. The highest selectivity was 74.9, 57.3, and 38.3 for D20, D12, and D4, respectively, at the initial conditions of 10 mg l⁻¹ phenanthrene, 5 g l⁻¹ Triton X-100 and 1 g l⁻¹ activated carbon. In the case of D20 at the same conditions, 86.5% of the initial phenanthrene was removed by sorption and 93.6% of the initial Triton X-100 remained in the solution following the selective adsorption process. The results suggest that the selective adsorption by activated carbon is a good alternative for surfactant recovery in a soil washing process.     

Phytotoxicity and phytoremediation of 2,6-dinitrotoluene using a model plant, Arabidopsis thaliana

Biochemical and genetic studies of xenobiotic metabolism in the model plant Arabidopsis have significant potential in providing information for phytoremediation. This paper presents the toxicity of 2,6-dinitrotoluene (2,6-DNT) to Arabidopsis under axenic conditions, the fate and transformation of 2,6-DNT after uptake by the plant, and the effect of a putative glutathione S-transferase (GST), which is highly induced by 2,4,6-trinitrotoluene (TNT) in the previous study, on the detoxification of 2,6-DNT. 2,6-DNT had toxic effects on the growth of Arabidopsis based on whole seedling as well as root growth assays. Using [U- 14C]2,6-DNT, the recovery was over 87% and less than 2% accounted for the mineralization of 2,6-DNT in axenic liquid cultures during the 14d of exposure. About half (48.3%) of the intracellular radioactivity was located in the root tissues in non-sterile hydroponic cultures. 2-Amino-6-nitrotoluene (2A6NT) and two unknown metabolites were produced as transformation products of 2,6-DNT in the liquid media. The metabolites were further characterized by proton NMR spectra and the UV-chromatograms when the plant was fed with either 2,6-DNT or 2A6NT. In addition, polar unknown metabolites were detected at short retention times from radiochromatograms of plant tissue extracts. The GST gene of the wild-type of Arabidopsis in response to 2,6-DNT was induced by 4.7-fold. However, the uptake rates and the tolerance at different concentrations of 2,6-DNT and TNT were not significantly different between the wild-type and the gst mutant indicating that induction of the GST gene is not related to the detoxification of 2,6-DNT.     

Iron isotopic fractionation in industrial emissions and urban aerosols

A study on tropospheric aerosols involving Fe particles with an industrial origin is tackled here. Aerosols were collected at the largest exhausts of a major European steel metallurgy plant and around its near urban environment. A combination of bulk and individual particle analysis performed by SEM–EDX provides the chemical composition of Fe-bearing aerosols emitted within the factory process (hematite, magnetite and agglomerates of these oxides with sylvite (KCl), calcite (CaCO₃) and graphite carbon). Fe isotopic compositions of those emissions fall within the range (0.08‰ < δ⁵⁶Fe < +0.80‰) of enriched ores processed by the manufacturer (−0.16‰ < δ⁵⁶Fe < +1.19‰). No significant evolution of Fe fractionation during steelworks processes is observed. At the industrial source, Fe is mainly present as oxide particles, to some extent in 3–4 μm aggregates. In the close urban area, 5 km away from the steel plant, individual particle analysis of collected aerosols presents, in addition to the industrial particle type, aluminosilicates and related natural particles (gypsum, quartz, calcite and reacted sea salt). The Fe isotopic composition (δ⁵⁶Fe = 0.14 ± 0.11‰) measured in the close urban environment of the steel metallurgy plant appears coherent with an external mixing of industrial and continental Fe-containing tropospheric aerosols, as evidenced by individual particle chemical analysis. Our isotopic data provide a first estimation of an anthropogenic source term as part of the study of photochemically promoted dissolution processes and related Fe fractionations in tropospheric aerosols.     

Environmental and economic feasibility study of a total wastewater treatment network system

The synthesis of distributed wastewater treatment plants (WTPs) has been studied to reduce capital and operating costs associated with wastewater treatment. In this study, the environmental and economic feasibility of a total wastewater treatment network system (TWTNS) including distributed and terminal WTPs was estimated using life cycle assessment (LCA) and life cycle costing (LCC) methods. Wastewater sources and existing distributed and terminal WTPs in an iron and steel plant were networked. The TWTNS was generated from the optimal solution to a mathematical optimization model and compared to a conventional wastewater treatment system (CWTS). The environmental effect scores of the TWTNS were from 29.6% to 68.3% higher than those of the CWTS because of higher electricity consumption required to pump wastewater to the networked WTPs. However, the life cycle cost of the TWTNS was lower than that of the CWTS by 10.1% because of the decrease of the labor cost resulting from the closing of three distributed WTPs. Overall, the TWTNS was no more eco-efficient than the CWTS because the increase of environmental burdens outweighed the decrease of economic costs.