A Comparative Study Between Technological Properties of Cashew Tree Gum and Arabic Gum

Arabic gum (AG) is the most common emulsifier used for beverage emulsions. Cashew tree gum (CG) is a biological macromolecule that has been proposed as a substitute for the AG, although their technological properties comparison is still necessary. The aim of this study was to evaluate an isolation method for CG, and then evaluate CG technological properties in comparison to AG. The CG isolation methodology was improved using a small solvent amount. CG zeta-potential ranged from +8.0 mV (pH 2) to ?9.7 mV (pH 5), while the electric charge in solution of AG ranged from ?2.7 mV (pH 2) to ?28.6 mV (pH 6). As compared to AG, the CG showed a 50 % higher swelling, a 36 % lower oil absorption capacity, a slightly lower (4–8 %) solubility and lower consistency. CG is a feasible polyelectrolyte, promotes lower consistency solutions, and exhibits good swelling property.     

Efficiency of Reovirus Concentration from Water with Positively Charged Filters

This study examined the efficacy of reovirus concentration from large volumes of water using two positively charged filters: Zeta Plus 1MDS and NanoCeram. The results indicated that an average of 61 and 81% of input reoviruses were effectively recovered, respectively, from recycled water and tap water using NanoCeram filtration.     

Towards saving freshwater: halophytes as unconventional feedstuffs in livestock feed: a review

Water represents 71% of all earth area and about 97% of this water is salty water. So, only 3% of the overall world water quantity is freshwater. Human can benefit only from 1% of this water and the remaining 2% freeze at both poles of earth. Therefore, it is important to preserve the freshwater through increasing the plants consuming salty water. The future prosperity of feed resources in arid and semi-arid countries depends on economic use of alternative resources that have been marginalized for long periods of time, such as halophytic plants, which are one such potential future resource. Halophyte plants can grow in high salinity water and soil and to some extent during drought. The growth of these plants depends on the contact of the salted water with plant roots as in semi-desert saline water, mangrove swamps, marshes, and seashores. Halophyte plants need high levels of sodium chloride in the soil water for growth, and the soil water must also contain high levels of salts, as sodium hydroxide or magnesium sulfate. There are many uses for halophyte plants, including feed for animals, vegetables, drugs, sand dune stabilizers, wind shelter, soil cover, wetland cultivation, laundry detergents, and paper production. This paper will focus on the use of halophytes as a feed additive for animals. In spite of the good nutritional value of halophytes, some anti-nutritional factors as nitrates, nitrite complexes, tannins, glycosides, phenolic compounds, saponins, oxalates, and alkaloids may be present in some of them. The presence of such anti-nutritional agents makes halophytes unpalatable to animals, which tends to reduce feed intake and nutrient use. Therefore, the negative effects of these plants on animal performance are the only objection against using halophytes in animal feed diets. This review article highlights the beneficial impact of considering halophytes in animal feeding on saving freshwater and illustrates its nutritive value for livestock from different aspects.     

Minimizing irrigation water demand: An evaluation of shifting planting dates in Sri Lanka

Climate change coupled with increasing demands for water necessitates an improved understanding of the water–food nexus at a scale local enough to inform farmer adaptations. Such assessments are particularly important for nations with significant small-scale farming and high spatial variability in climate, such as Sri Lanka. By comparing historical patterns of irrigation water requirements (IWRs) to rice planting records, we estimate that shifting rice planting dates to earlier in the season could yield water savings of up to 6%. Our findings demonstrate the potential of low-cost adaptation strategies to help meet crop production demands in water-scarce environments. This local-scale assessment of IWRs in Sri Lanka highlights the value of using historical data to inform agricultural management of water resources when high-skilled forecasts are not available. Given national policies prioritizing in-country production and farmers’ sensitivities to water stress, decision-makers should consider local degrees of climate variability in institutional design of irrigation management structures.     

Food nitrogen footprint reductions related to a balanced Japanese diet

Dietary choices largely affect human-induced reactive nitrogen accumulation in the environment and resultant environmental problems. A nitrogen footprint (NF) is an indicator of how an individual’s consumption patterns impact nitrogen pollution. Here, we examined the impact of changes in the Japanese diet from 1961 to 2011 and the effect of alternative diets (the recommended protein diet, a pescetarian diet, a low-NF food diet, and a balanced Japanese diet) on the food NF. The annual per capita Japanese food NF has increased by 55% as a result of dietary changes since 1961. The 1975 Japanese diet, a balanced omnivorous diet that reportedly delays senescence, with a protein content similar to the current level, reduced the current food NF (15.2 kg N) to 12.6 kg N, which is comparable to the level in the recommended protein diet (12.3 kg N). These findings will help consumers make dietary choices to reduce their impacts on nitrogen pollution.     

Temporal variation in total phosphorus concentrations revealed from a multidecadal monitoring program on Big Platte Lake,Michigan

Effective water quality management depends on enactment of appropriately designed monitoring programs to reveal current and forecasted conditions. Because water quality conditions are influenced by numerous factors, commonly measured attributes such as total phosphorus (TP) can be highly temporally varying. For highly varying processes, monitoring programs should be long-term and periodic quantitative analyses are needed so that temporal trends can be distinguished from stochastic variation, which can yield insights into potential modifications to the program. Using generalized additive mixed modeling, we assessed temporal (yearly and monthly) trends and quantified other sources of variation (daily and subsampling) in TP concentrations from a multidecadal depth-specific monitoring program on Big Platte Lake, Michigan. Yearly TP concentrations decreased from the late 1980s to late 1990s before rebounding through the early 2000s. At depths of 2.29 to 13.72 m, TP concentrations have cycled around stationary points since the early 2000s, while at the surface and depths ≥?18.29 concentrations have continued declining. Summer and fall peaks in TP concentrations were observed at most depths, with the fall peak at deeper depths occurring 1 month earlier than shallower depths. Daily sampling variation (i.e., variation within a given month and year) was greatest at shallowest and deepest depths. Variation in subsamples collected from depth-specific water samples constituted a small fraction of total variation. Based on model results, cost-saving measures to consider for the monitoring program include reducing subsampling of depth-specific concentrations and reducing the number of sampling depths given observed consistencies across the program period.     

Controlling enzymatic activity by immobilization on graphene oxide

In this study, graphene oxide (GO) has been applied as a matrix for enzyme immobilization. The protein adsorption capacity of GO is much higher than of other large surface area carbonaceous materials. Its structure and physicochemical properties are reported beneficial also for enzymatic activity modifications. The experimental proof was done here that GO-based biocatalytic systems with immobilized catalase are modifiable in terms of catalyzed reaction kinetic constants. It was found that activity and stability of catalase, considered here as model enzyme, closely depend on enzyme/GO ratio. The changes in kinetic parameters can be related to secondary structure alterations. The correlation between enzyme/GO ratio and kinetic and structure parameters is reported for the first time and enables the conscious control of biocatalytic processes and their extended applications. The biological activity of obtained biocatalytic systems was confirmed in vitro by the use of functional test. The addition of immobilized catalase improved the cells’ viability after they were exposed to hydrogen peroxide and tert-butyl-hydroperoxide used as source of reactive oxygen species.     

Building low-carbon and disaster-resilient communities: integrating climate mitigation and adaptation into the assessment of self-help housing design

Housing is not only one of the major sources of carbon dioxide (CO₂) emissions, but it has been increasingly vulnerable to climate-induced disasters, particularly those sheltering the urban poor. Both mitigation and adaptation measures are therefore required for the design and construction of low-income housing to encourage low carbon development and improve resilience to disasters. As self-help housing—the common type of housing for the urban poor in developing countries—is usually built by ordinary people with participatory approach, it is crucial to develop a low-carbon and disaster-resilient assessment tool for assisting them in making informed decisions during planning process. The objective of this article is to propose a new approach for developing a low-carbon and disaster-resilient assessment tool for self-help housing (LoDAT-SH) by combining opinions from experts and community residents to assign weights, identify indicators, and establish benchmarks with the aim to develop a simple, relevant, and practical tool for non-expert users like self-help residents. The application of the proposed methodology to a case study of a developing country, Thailand, shows the ability of LoDAT-SH, which contains 45 indicators in the four categories of low carbon development, disaster resilience, community participation, and financial consideration, in enabling self-help residents to assess the performance of their housing design, identify potential measures to create a low-carbon and disaster-resilient housing, and prioritize such actions. To support the creation of a low-carbon and disaster-resilient housing as the mitigation and adaptation strategy for urban development at the global level, the study suggests that the methodology of LoDAT-SH should be replicated to develop a more comprehensive assessment tool applicable for the use in self-help housing design in other developing countries, which will house about 900 million of the urban poor by 2020.     

Changes in air saturation and air-water interfacial area during surfactant-enhanced air sparging in saturated sand

Reduction in the surface tension of groundwater, prior to air sparging for removal of volatile organic contaminant from aquifer, can greatly enhance the air content and the extent of influence when air sparging is implemented. However, detailed information on the functional relationship between water saturation, air-water contact area induced by air sparging and the surface tension of water has not been available. In this study, the influence of adding water-soluble anionic surfactant (sodium dodecyl benzene sulfonate) into groundwater before air sparging on the air-water interfacial area and water saturation was investigated using a laboratory-scale sand packed column. It was found that water saturation decreases with decreasing surface tension of water until it reaches a point where this trend is reversed so that water saturation increases with further decrease in the surface tension. The lowest water saturation of 0.58 was achieved at a surface tension of 45.4 dyn/cm, which is considered as the optimum surface tension for maximum de-saturation for the initially water-saturated sand used in this study. The air-water contact area generated in the sand column due to air sparging was measured using a gaseous interfacial tracer, n-decane, and was found to monotonically increase with decreasing water saturation. The results of this study provide useful design information for surfactant-enhanced air sparging removal of volatile contaminants from aquifers.