Optimizing vermicomposting of animal wastes: effects of rate of manure application on carbon loss and microbial stabilization

Vermicomposting is the process whereby organic residues are broken down by earthworms and microorganisms. Addition of manure has been shown to be of critical importance and determines most of the changes that take place during vermicomposting. Here, we study how the rate of manure applied affects microbial biomass and activity and carbon losses. For this, we designed continuous feeding reactors in which new layers of manure were added sequentially to form an age gradient inside the reactors. We compared two application rates of pig slurry (1.5 and 3kg) and set up six reactors for each one; half of the 12 reactors initially contained a population of 500 earthworms (Eisenia fetida). We found that earthworms increased microbial biomass and were more active in reactors fed with 3kg of slurry. However, the differential rates of respiration were not reflected in C losses. The results thus showed that loss of C was not affected by the rate of pig slurry applied. We conclude that despite the strong effect that the rate of manure has on microbe-earthworm relationships, it did not affect carbon losses. We therefore recommend the use of low application rates of manure when the objective is the microbial stabilization of the residue.     

Evaluation of spatial and temporal variations in marine sediments quality using multivariate statistical techniques

Spatial and temporal variations of sediment quality in Matanzas Bay (Cuba) were studied by determining a total of 12 variables (Zn, Cu, Pb, As, Ni, Co, Al, Fe, Mn, V, CO₃ ^2?, and total hydrocarbons (THC). Surface sediments were collected, annually, at eight stations during 2005–2008. Multivariate statistical techniques, such as principal component (PCA), cluster (CA), and lineal discriminant (LDA) analyses were applied for identification of the most significant variables influencing the environmental quality of sediments. Heavy metals (Zn, Cu, Pb, V, and As) and THC were the most significant species contributing to sediment quality variations during the sampling period. Concentrations of V and As were determined in sediments of this ecosystem for the first time. The variation of sediment environmental quality with the sampling period and the differentiation of samples in three groups along the bay were obtained. The usefulness of the multivariate statistical techniques employed for the environmental interpretation of a limited dataset was confirmed.     

Improving data quality on low level mercury wastewater analysis

In order to compare treatability test results evaluating low-level mercury (Hg) removal from oil refinery wastewater, improvements in Hg analytical methods were conducted at two US EPA certified analytical labs. The revisions in the analytical protocols improved Hg recoveries and hence enabled more reliable data interpretation and comparison for the specific wastewater tested. Nevertheless, significant differences between results from the two laboratories were identified in a split-sample experiment.     

Assessment comparison of commercial TiO2 and TiO2 sol-gel on the degradation of caffeine using artificial radiation

Environmental Science and Pollution Research - The presence of endocrine disrupting compounds in water receptor bodies, such as drugs, currently has in scientific field a great focus of studies...     

Morphology of <Emphasis Type="Italic">Penicillium funiculosum</Emphasis> During Biodegradation of Poly (β-hydroxybutyrate-co-β-hydroxyvalerate) [PHBV] with Poly (ε-Caprolactone) [PCL] Blends

Blends of poly (β-hydroxybutyrate-co-β-hydroxyvalerate) with poly (ε-caprolactone) were produced using melt mixing and solvent casting techniques. The biodegradation of blends was tested based in the ASTM G21-90 using Penicillium funiculosum fungal specie. The CO₂ production during biodegradation was measured and fitted using the Gompertz model. Biodegradation of blends varies according to the mixing technique and the proportion of bacterial polymers in the blends. Although lag phase was larger, solvent-casted blends were easier to degrade due to their porous surface and relative lower crystallinity. P. funiculosum morphology during biodegradation appeared to be related to carbon availability i.e. larger and more complex conidiophores, more phialides per conidiophore and the presence of double-phialides, were found in blends with higher PHAs proportion. P. funiculosum morphology was independent to the blending technique used. Hence, morphology of P. funiculosum could be useful as a reference for carbon bioavailability of the blends.     

Inferring episodic atmospheric iron fluxes in the Western South Atlantic

Iron (Fe) and other trace elements such as Zn, Mn, Ni and Cu are known as key-factors in marine biogeochemical cycles. It is believed that ocean primary productivity blooms in iron deficient regions can be triggered by iron in aeolian dust. Up to now, scarce aerosol elemental composition, based on measurements over sea at the Western South Atlantic (WSA), exist. An association between the Patagonian semi-desert dust/Fe and chlorophyll-a variability at the Argentinean continental shelf is essentially inferred from models. We present here experimental data of Fe enriched aerosols over the WSA between latitudes 22°S–62°S, during 4 oceanographic campaigns between 2002 and 2005. These data allowed inferring the atmospheric Fe flux onto different latitudinal bands which varied from 30.4 to 1688 nmolFe m^?2 day^?1 (October 29th–November 15th, 2003); 5.83–1586 nmolFe m^?2 day^?1 (February 15th–March 6th, 2004) and 4.73–586 nmolFe m^?2 day^?1(October 21st–November 5th, 2005).     

Sorption of hazardous metals from single and multi-element solutions by saltbush biomass in batch and continuous mode: interference of calcium and magnesium in batch mode

Batch studies were performed to determine the interference of calcium (Ca) and magnesium (Mg) on the sorption of Cu(II), Cd(II), Cr(III), Cr(VI), Pb(II), and Zn(II) [from CuSO(4), K(2)Cr(2)O(7), Pb(NO(3))(2), Cr(NO(3))(3), ZnCl(2), and Cd(NO(3))(2)] by saltbush (Atriplex canescens) biomass. The results demonstrated that Ca and Mg at concentrations of at least 20 times higher than the concentration of most of the target metals did not interfere with the metal binding. The data show that the batch binding capacity from a multimetal solution at pH 5.0 was (micromol/g) about 260 for Cr(III) and Pb, and about 117, 54, and 49 for Cu, Zn, and Cd, respectively. The use of 0.1M HCl allowed the recovery of 85-100% of the bound Cu, Cr(III), and Pb, and more than 37% of the bound Cd and Zn. The column binding capacity for Pb was about 49 micromol/g from both the single and multimetal solutions, while it was, respectively about 35 and 23 micromol/g for Cr(III). The binding capacity for Cu and Zn from the single and multimetal column experiments was 35 micromol/g and less than 10 micromol/g, respectively. The stripping data from the single column experiment showed that 0.1M HCl allowed the recovery of all the bound Cu and Zn, 90% and 74% of the bound Pb and Cr(VI), respectively, and less than 25% of the bound Cd and Cr(III), while the stripping from the multimetal experiment showed that 0.1M HCl allowed the recovery of all the bound Cu and about 74%, 54%, 43%, and 40% of the bound Pb, Zn, Cd, and Cr(III), respectively.     

Using Phylogenetic Diversity Measures to Set Priorities in Conservation: an Example from Southern South America

Abstract: Phylogenetic diversity measures rank areas for biodiversity conservation priorities based on information encoded in phylogenies (cladograms). The goal of these ranks for conservation is to consider as many factors as possible that provide additional taxic information, such as taxa richness, taxa distributional patterns, area endemicity, and complementarity between areas. At present there are many measures that consider phylogenetic information, including node-based, genetic-distance, and feature-based measures. We devised a modified phylogenetic node-based index that we call "taxonomic endemicity standardized weight," which considers not only the taxonomic distinctness of the taxa that inhabit a given area but their endemicity as well. Once the standardized weight of the taxonomic endemicity identifies the area of highest priority, complementarity can be used to identify the second area and so on. We used this node-based index to rank priority areas for conservation in southern South America, and we compared the results of our rankings to results based on other node-based indexes. Our index identified Santiago district, in Central Chile province, as the highest priority area for conservation, followed by Maule, Malvinas, and districts of Subantarctic province. Malvinas exhibits greater complementarity relative to Santiago than Maule does, however, so Malvinas is ranked second in priority. Indexes based on phylogenetic information measure the evolutionary component of biodiversity and allow one to identify areas that will ensure the preservation of evolutionary potential and phylogenetically rare taxa. The modified index we propose is sensitive to taxic distinctness and endemicity as well and allows information from diverse taxa to be combined (i.e., different cladograms). The use of complementarity allows for preservation of the maximum quantity of taxa in a minimal number of protected areas.     

Local Population Dynamics in Metapopulation Models: Implications for Conservation

Abstract: Habitat fragmentation and the division of populations into spatially separated units have led to the increasing use of metapopulation models to characterize these populations. One prominent model that has served as a heuristic tool was introduced by Levins and is based on a collection of simplifying assumptions that exclude information on the dynamics and spatial distribution of local populations. Levins's and similar models predict the proportion of occupied habitat patches at equilibrium and the conditions needed to avoid total extinction. There are many obvious concerns about using such models, including how realistic alterations might change the predictions and whether occupancy has any relationship to population-level processes. Although many of the assumptions of these simple models are known to be unrealistic, we do not know how the assumptions affect model predictions. We simulated a metapopulation, and our results show that assumptions such as homogeneity of habitat patches, random migration among patches, equivalent extinction probabilities in all patches, and a large number of patches can lead to large overestimations of habitat occupancy. But when we explicitly modeled the underlying population dynamics within each patch, we found (1) that there was a strong correlation between proportion of occupied patches and total metapopulation size and (2) that the distribution of individuals among patches was relatively insensitive to model assumptions. Thus, our results show that although realistic modifications will change model predictions for occupancy, occupancy and population trends will be correlated. These correlations between occupancy and population size suggest that occupancy models may have some utility in conservation applications.