Effects of smelter sulfur dioxide emissions: a spatiotemporal perspective using carbon isotopes in tree rings

We wanted to test the hypothesis that forest exposure to phytotoxic gases indirectly affects their carbon uptake. We estimated that the reduction of photosynthesis may have reached 20 to 30% at a site located 9 km (test site) from the Horne copper smelter in Rouyn-Noranda, which is a point source of SO2. Twenty-one spruce trees older than 100 yr were selected from seven sites at various distances from the smelter to evaluate conditions prior to and during the periods of smelter operation. The carbon isotope results obtained from spruce tree rings at our test site reveal an unprecedented and abrupt shift of +4/1000 after the onset of smelter operations. This large and permanent shift exceeds natural variations in regional pre-smelter series or in the series at a remote control site. All trees up to 116 km downwind from the smelter show delta13C positive shifts following the onset of operations. There is also a clear inverse relationship between the amplitude of the first-order trends and distance from the smelter. Those delta13C trends indicate that trees exposed to high levels of SO2 decrease their level of CO2 uptake through activation of stomatal closure. This is strongly supported by the significant departure of the Rouyn-Noranda trends from those measured for trees from non-industrialized areas of the Northern Hemisphere, or calculated using global atmospheric conditions. Considering the large number of SO2 point sources in North America, our results imply that CO2 uptake by the boreal forest in the vicinity of these sources may be lower than previously thought.     

Influence of organic loading on an anaerobic sequencing biofilm batch reactor (ASBBR) as a function of cycle period and wastewater concentration

The effect of organic loading on the performance of a mechanically stirred anaerobic sequencing biofilm batch reactor (ASBBR) has been investigated, by varying influent concentration and cycle period. For microbial immobilization 1-cm polyurethane foam cubes were used. An agitation rate of 500 rpm and temperature of 30+/-2 degrees C were employed. Organic loading rates (OLR) of 1.5-6.0gCODl(-1)d(-1) were applied to the 6.3-l reactor treating 2.0 l synthetic wastewater in 8 and 12-h batches and at concentrations of 500-2000mgCODl(-1), making it possible to analyze the effect of these two operation variables for the same organic loading range. Microbial immobilization on inert support maintained approximately 60 gTVS in the reactor. Filtered sample organic COD removal efficiencies ranged from 73 to 88% for organic loading up to 5.4gCODl(-1)d(-1). For higher organic loading (influent concentration of 2000mgCODl(-1) and 8-h cycle) the system presented total volatile acids accumulation, which reduced organics removal efficiency down to 55%. In this way, ASBBR with immobilized biomass was shown to be efficient for organic removal at organic loading rates of up to 5.4gCODl(-1)d(-1) and to be more stable to organic loading variations for 12-h cycles. This reactor might be an alternative to intermittent systems as it possesses greater operational flexibility. It might also be an alternative to batch systems suspended with microorganisms since it eliminates both the uncertainties regarding granulation and the time necessary for biomass sedimentation, hence reducing the total cycle period.     

A basidiomycete isolated from the skeleton of<Emphasis Type="Italic"> Pocillopora damicornis</Emphasis> (Scleractinia) selectively stimulates short-term survival of coral skeletogenic cells

Endolithic fungi bore through the extracellular calcium carbonate skeleton of reef-building scleractinian corals, both healthy and dead, and effect net erosion of coral reefs. Potential fungal interactions with coral tissue were investigated using an in vitro approach suggested by earlier observations of skeletal repair cones at the site of fungal perforation in Porites sp. A fungal strain was isolated from the skeleton of a long-term culture of healthy, tissue-covered, Pocillopora damicornis Linnaeus colonies maintained in a recirculating system in Monaco. As coral soft tissue spontaneously dissociated in vitro, the skeleton became exposed and hyaline hyphae emerged radially from 15% of the total clipped branches. In this study, which was performed between January 2001 and March 2003, 35 skeleton–hypha explants were embedded in agar-based solid medium, yielding 60% hyphal growth. A fungal strain (F19-3-1) of the dominant (80%) morphology was isolated and propagated in agar-based solid medium. The strain was identified by 18S and 26S rDNA gene sequence analysis as a basidiomycete in the genus Cryptococcus. Co-cultures were used to provide experimental exposure of coral soft tissue to the fungus. The fungus extended the survival of coral cells by 2 days, selectively maintaining skeletogenic cell types. This effect may be interpreted as stimulation by the fungus of a short-term coral defense response.Communicated by J.P. Grassle, New Brunswick     

Chromium (III) recovery from waste acid solution by ion exchange processing using Amberlite IR-120 resin: batch and continuous ion exchange modelling

The use of ion exchange technology was studied to remove chromium (III) from acidic waste solution by Amberlite IR-120 resin. Batch and column experimental tests were conducted to provide data for theoretical models and verify the system performance of the adsorption process. Results of batch equilibrium tests indicated that Langmuir isotherm describes well the adsorption process, whereas experimental data also provide evidence that, under the present experimental conditions, chromium (III) adsorption by Amberlite IR-120 resin is film-diffusion controlled; on the other hand, the theoretical model used in the present investigation was found to predict reasonably well the ion exchange breakthrough performance.     

Heavy metals in fish (Solea vulgaris, Anguilla anguilla and Liza aurata) from salt marshes on the southern Atlantic coast of Spain

Comparisons were made of metal concentrations in water and sediment with those in the muscle and livers of three species of fish caught in four seawater reservoirs (two in the Odiel estuary and two in the Bay of Cádiz). The concentrations of a large number of metals in the water, sediment and fish were higher in the Odiel reservoirs than in those in Cádiz. We found high metal-enrichment factors in the livers as compared to muscle (over 100 for Fe and Cu and around 5 for Zn, Ni, Cd and Pb). The three fish species showed differences in metal content. For example, eels accumulated more metals in muscle and grey mullet in the liver. The metal levels found in muscle in the three species were below the legal limits for human consumption, although Cu in the liver was above the limit in the three species taken from the Odiel reservoirs, and Zn levels in liver were over the maximum in eels from one of the Odiel marshes. Significant correlations (p<0.05) were obtained for the levels of numerous metals in water, sediment and fish.     

Importance of colloids in the transport within the dissolved phase (<450 nm) of artificial radionuclides from the Rhône river towards the Gulf of Lions (Mediterranean Sea)

The significance of colloidal fractions regarding the transport of artificial radionuclides in natural water systems is underlined by using sequential ultrafiltration both in the Rh?ne freshwater and the marine area under and outside the influence of the river outflow. Indeed, the Rhodanian aquatic system represents an interesting test site as various artificial radionuclides are released into the Rh?ne river by several nuclear installations. We focused our study on (137)Cs, (106)Ru, (60)Co, (238)Pu and (239+240)Pu. Our results show that Fe, Al and Organic carbon (OC) are the main components of colloidal matter. Colloids represent about 15% of dissolved (<450 nm) OC and 25% of dissolved Fe and Al exported towards the sea. Within the dissolved (< 450 nm) phase, these colloidal compounds are shown to account for the transport of 40% for both Co and Ru, 60% for (238)Pu and (239+240)Pu and have no significance on (137)Cs flux.     

Radon-222 signatures of natural ventilation regimes in an underground quarry

Radon-222 activity concentration has been monitored since 1999 in an underground limestone quarry located in Vincennes, near Paris, France. It is homogeneous in summer, with an average value of 1700 Bq m(-3), and varies from 730 to 1450 Bq m(-3) in winter, indicating natural ventilation with a rate ranging from 0.5 to 2.4 x 10(-6) s(-1) (0.04-0.22 day(-1)). This hypothesis is supported by measurements in the vertical access pit where, in winter, a turbulent air current produces a stable radon profile, smoothly decreasing from 700 Bq m(-3) at 20 m depth to 300 Bq m(-3) at surface. In summer, a thermal stratification is maintained in the pit, but the radon-222 concentration jumps repeatedly between 100 and 2000 Bq m(-3). These jumps are due to atmospheric pressure pumping, which induces ventilation in the quarry at a rate of about 0.1 x 10(-6) s(-1) (0.009 day(-1)). Radon-222 monitoring thus provides a dynamical characterisation of ventilation regimes, which is important for the assessment of the long-term evolution of underground systems.     

The ecological relevance of current approaches for environmental protection from exposure to ionising radiation

This paper discusses the current approaches to environmental protection from ionising radiation from an ecological perspective, highlighting the need to understand fully what we are trying to protect. Ecologically relevant endpoints for environmental protection are discussed along with the need to integrate protection from ionising radiation with the approaches adopted for non-radioactive contaminants. A possible integrated assessment approach is outlined.     

An Ecological Integrity Index for Littoral Wetlands in Agricultural Catchments of Semiarid Mediterranean Regions

The main goal of the present study was to develop an ecological integrity index for littoral wetland management and conservation in semiarid Mediterranean areas that have been highly impacted by agriculture, including the selection of pressure and state indicators at landscape and wetlands scales that reflect the status, condition, and trends of wetlands ecosystems. We used a causality framework based on the relationship between pressure of anthropogenic activities and the ecological state of wetlands and their catchments, integrating environmental, biologic, economic, and social issues. From the application of 51 indicators in 7 littoral wetlands in the southeastern Iberian Peninsula, we selected 12 indicators (5 at catchment scale and 7 at wetland scale) to constitute the ecological integrity index proposed. The potential nitrogen export per area at catchment scale and the potential relative nitrogen export from the area surrounding the wetlands were the best pressure single predictors of state indicators with a causal relationship with environmental meaning. Wetlands in catchments with more agriculture had less ecological integrity than those in less impacted areas. A wide riparian zone in some wetlands acts as a buffer area, diminishing the effects of intensive agriculture. The index of ecological integrity developed here has a number of essential characteristics that make it a useful tool for ecosystem managers and decision-makers. The index can be used to (1) assess and control ecological integrity, (2) diagnose probable causes of ecological impairment, (3) establish criteria for protecting and restoring wetland ecosystems, and (4) integrate catchment management. Published online     

A Proactive Approach Can Make Site Remediation Less Expensive

Without any incentive to clean up a contaminated site, remediation is often delayed until the site owner is compelled to act by regulatory agencies. In such a context, the selected technology is typically the one that will reach the remediation goals as quickly as possible. Unfortunately, this criterion is often met by overly expensive technologies, resulting in high and sometimes unaffordable total remediation costs, leading to a remediation with a negative net benefit. This study examines the effects of time constraint and benefit value on the optimal remediation strategy for a diesel-contaminated site. This strategy is developed using the technico-economic model METEORS, which takes into account the technology’s effectiveness, the uncertainty of the level of contamination, and the possibility of reducing this uncertainty through either an additional characterization (before selecting and applying a technology) or the monitoring of the remediation technology (during its use). Results of simulations with both economic and temporal constraints support a proactive approach to site remediation.