Simulating bioremediation of uranium-contaminated aquifers; uncertainty assessment of model parameters

Bioremediation of trace metals and radionuclides in groundwater may require the manipulation of redox conditions via the injection of a carbon source. For example, after nitrate has been reduced, soluble U(VI) can be reduced simultaneously with other electron acceptors such as Fe(III) or sulfate to U(IV), which may precipitate as a solid (uraninite).To simulate the numerous biogeochemical processes that will occur during the bioremediation of trace-metal-contaminated aquifers, a time-dependent one-dimensional reactive transport model has been developed. The model consists of a set of coupled mass balance equations, accounting for advection, hydrodynamic dispersion, and a kinetic formulation of the biological or chemical transformations affecting an organic substrate, electron acceptors, corresponding reduced species, and trace metal contaminants of interest, uranium in this study. This set of equations is solved numerically, using a finite difference approximation. The redox conditions of the domain are characterized by estimating the pE, based on the concentration of the dominant terminal electron acceptor and its corresponding reduced species. This pE and the concentrations of relevant species are then used by a modified version of MINTEQA2, which calculates the speciation/sorption and precipitation/dissolution of the species of interest under equilibrium conditions. Kinetics of precipitation/dissolution processes are described as being proportional to the difference between the actual and calculated equilibrium concentration. A global uncertainty assessment, determined by Random Sampling High Dimensional Model Representation (RS-HDMR), was performed to attain a phenomenological understanding of the origins of output variability and to suggest input parameter refinements as well as to provide guidance for field experiments to improve the quality of the model predictions. By decomposing the model output variance into its different input contributions, RS-HDMR can identify the model inputs with the most influence on various model outputs, as well as their behavior pattern on the model output. Simulations are performed to illustrate the effect of biostimulation on the fate of uranium in a saturated aquifer, and to identify the key processes that need to be characterized with the highest accuracy prior to designing a uranium bioremediation scheme.     

Solute transport modeling under cultivated sandy soils and transient water regime

Drainable lysimeters offer the possibility to integrate heterogeneous solute leaching conditions caused by row crops and transient water regime, and to conveniently measure water and solute fluxes at the drainage outlet. To compare solute leaching behavior in and around drainable lysimeters operating under a transient water regime in potato (Solanum tuberosum L.) fields, parameters of the convective lognormal transfer (CLT) function model were fitted using bromide (Br-) flux concentrations (Cf) measured in lysimeters and from Br- resident concentrations (Cr) measured in adjacent soil cores. Expected mean values Ez(I) obtained from Cr and Cf CLT parameters were equivalent and well correlated (R2 = 0.78). However, estimated median values mu of the CLT function were smaller when derived from Cr (1.05 to 1.28) compared with Cf (1.23 to 2.14). Most mu values were also smaller than previously reported values for a 30-cm reference depth, indicating that 50% of solute mass would leach more readily in these coarse sandy soils. Higher variance and dispersion of Cr compared with those of Cf could be related to a smaller sampling support (sample size/sampling area) in the case of Cr measured by soil coring, or to disruption of solute transport mechanisms in the repacked lysimeter. Retained Br- in the top soil layer after 12 to 17 cm of cumulative drainage was indicated by measured Cr. Neither CLT function simulated well residual topsoil Cr values, indicating that Br- plant cycling or preferential flow probably interfered even though tuber Br- uptake was relatively small.     

Development and application of an ecosystem management approach for protected natural areas

Preservation of small natural areas is not in itself a sufficient measure to maintain the integrity of the ecosystems for which they were initially set aside. Intense pressure from recreational use is just one of the many human-caused stresses that may degrade natural areas. Therefore, land-use planning and management from an ecological perspective is necessary to assess, ensure, and in some cases increase, the ecological integrity of protected natural areas. An ecosystem management approach for small protected natural areas with high recreational use is presented, based on three interrelated components: an ecological evaluation procedure of ecosystems, the implementation of management interventions on ecosystems, and the development of a monitoring scheme of ecosystem components. The ecological evaluation procedure combines two concepts: the biotic value of vegetation and wildlife and the abiotic fragility of the soils. This combined evaluation process results in the creation of a sensitivity map that can be used as a management tool for planners and managers. Management interventions, the second component of the management approach, are derived from concepts of ecological succession. Intentional human interventions are used to maintain the ecological integrity of ecosystems or in some cases to restore degraded sites. For the third component, only the basic principles of the monitoring program will be discussed. A pilot project in one of the Montreal urban community protected areas is presented to illustrate aspects of the proposed ecosystem management approach.     

Catalytic upgrading of higher 1-alkenes from polyethylene thermal cracking by modified Wacker oxidation

The economic success of feedstock recycling procedures for plastic wastes is increasingly demanding the conversion of the starting residue into more valuable chemicals. Thermal cracking of polyethylenes leads to the preparation of equimolar mixtures of n-paraffins and 1-alkenes within the C₂–C₁₀₀ range. These 1-olefins can be catalytically upgraded by selective oxidation processes to more valuable products (e.g., ketones and fatty acids) with different uses such as polar waxes, cetane improvers, varnishes, and printer inks. The results obtained on oxidation in a modified Wacker system of a model 1-olefin (1-dodecene) as well as of a distillate cut (C₁₀–C₂₅) of the product from the thermal cracking of urban polyethylene waste are described.     

Cost-benefit analysis as a tool for decision making in environmental projects

BACKGROUND, AIM AND SCOPE: The Damage-Function method is an efficient tool recently used in decision-making processes concerning environmental management. It is based on finding the relation between the origin of an environmental charge, and its impact on human health and the environment. The aim of the present investigation was to assess the positive impacts, also called benefits, of changes in environmental quality, and the economic viability of an industrial project on reduction of PCDD/F emissions. It has been developed with monetary criteria of two worldwide ambits: USA and European-Union countries. METHODS: The current study is a continuation of a previous investigation in which Substance Flow Analysis and Control Analysis Techniques were used to identify and to analyze all main flow values of PCDD/Fs inside the system of Tarragona Province (Spain). In the present study, Cost-Benefit Analysis (CBA) has been employed. The benefits derived from a minimization in the incidence of cancer due to a reduction in the emission of PCDD/Fs have been evaluated considering the value of a statistically saved life (VSL). Statistical analysis about uncertainty has also been incorporated. Here, the Monte Carlo simulation technique has been used. RESULTS: It is shown that CBS results depend firstly on the kind of VSL used. In fact, the differences between the decisions as a result of applying monetary criteria in USA and EU can be explained by differences between VSL values. CONCLUSION AND RECOMMENDATION: It is concluded that, for prices estimated in Euros, the emission cleaning project in the industrial plant is not feasible under any circumstance. However, although CBA seems to be a good analytical method, the final decision corresponds to the managers, who must weigh up not only the monetary criteria, but factors such as social questions.     

Phytoaccumulation of heavy metals by aquatic plants

Three aquatic plants were examined for their ability to remove heavy metals from contaminated water: parrot feather (Myriophylhum aquaticum), creeping primrose (Ludwigina palustris), and water mint (Mentha aquatic). The plants were obtained from a Solar Aquatic System treating municipal wastewater. All the three plants were able to remove Fe, Zn, Cu, and Hg from the contaminated water. The average removal efficiency for the three plant species was 99.8%, 76.7%, 41.62%, and 33.9% of Hg, Fe, Cu, and Zn, respectively. The removal rates of zinc and copper were constant (0.48 mg/l/day for Zn and 0.11 mg/l/day for Cu), whereas those of iron and mercury were dependent on the concentration of these elements in the contaminated water and ranged from 7.00 to 0.41 mg/l/day for Fe and 0.0787 to 0.0002 mg/l/day for Hg. Parrot feather showed greater tolerance to toxicity followed by water mint and creeping primrose. The growth of creeping primrose was significantly affected by heavy metal toxicity. The selectivity of heavy metals for the three plant species was the same (Hg>Fe>Cu>Zn). The mass balance preformed on the system showed that about 60.45-82.61% of the zinc and 38.96-60.75% of the copper were removed by precipitation as zinc phosphate and copper phosphate, respectively.     

Evaluation of the effectiveness of horizontal subsurface flow constructed wetlands for different media

Two media bed (gravel and Filtralite NR) were tested in a mesocosm to evaluate the removal of organic matter (as chemical oxygen demand (COD)),ammonia (NH4-N),nitrite,nitrate and solid matter (as total suspended solids (TSS)) for a synthetic wastewater (acetate-based) and a domestic wastewater.The use of Filtralite allowed average removal rates (6–16.8 g COD/(m2·day),0.8–1.1 g NH4-N/(m2·day) and 3.1 g TSS/(m2·day)) and removal effciencies (65%–93%,57%–85% and 78% for COD,NH4-N and TSS,respectively),higher than that observed in the experiments with gravel.The applied loads of COD,ammonia,nitrate and TSS seem to influence the respective removal rates but only for the treatment of domestic wastewater with higher correlation coefficients for Filtralite.Regardless the type of media bed and the type of wastewater,nitrate was completely removed for nitrogen loading rates up to 1.3 g NO3-N/(m2·day).There was no evidence of the influence of nitrate loads on the removal of organic matter.     

Innate humoural immunity is related to eggshell bacterial load of European birds: a comparative analysis

Fitness benefits associated with the development of a costly immune system would include not only self-protection against pathogenic microorganisms but also protection of host offspring if it reduces the probability and the rate of vertical transmission of microorganisms. This possibility predicts a negative relationship between probabilities of vertical transmission of symbionts and level of immune response that we here explore inter-specifically. We estimated eggshell bacterial loads by culturing heterotrophic bacteria, Enterococcus, Staphylococcus and Enterobacteriaceae on the eggshells of 29 species of birds as a proxy of vertical transmission of bacteria from mother to offspring. For this pool of species, we also estimated innate immune response (natural antibody and complement (lysis)) of adults, which constitute the main defence against bacterial infection. Multivariate general linear models revealed the predicted negative association between natural antibodies and density of bacteria on the eggshell of 19 species of birds for which we sampled the eggs in more than one nest. Univariate analyses revealed significant associations for heterotrophic bacteria and for Enterobacteriaceae, a group of bacteria that includes important pathogens of avian embryos. Therefore, these results suggest a possible trans-generational benefit of developing a strong immune system by reducing vertical transmission of pathogens.     

Development of a loading dock safety evaluation tool

INTRODUCTION: Companies that use forklifts to load and unload trucks at loading docks are well aware of the main danger associated with this type of activity (i.e., the possibility of the forklift falling or tipping over when the truck suddenly moves away from the dock). Even if various truck restraint measures can be implemented to reduce the possibility of this type of accident, a number of hazardous incidents that result in a forklift tipping over from a loading dock still do occur regularly in day-to-day activities. This situation has brought experts to examine and evaluate the effectiveness of different measures and systems depending on the context in which they are used. METHODS: The present study touched upon both the technical and the organizational aspects of the restraint measures that could have an impact on safety. Certain elements were examined very closely, especially the failure of mechanical devices and their relation to the environment in which they are used, as well as the systemic interaction between people and the various restraint measures in use in a given context. CONCLUSION: This article presents a safety evaluation tool regarding restraint measures or systems for trucks docked at loading platforms - a tool that, of course, would take into consideration both the specific contextual aspects related to the docking bay itself, and to the plant. IMPACT ON INDUSTRY: This tool is designed to help companies choose the optimal safety measures to implement, while remaining realistic in terms of the technical and economic aspects of any given situation.