Contribution of sugar-cane harvesting season to atmospheric contamination by polycyclic aromatic hydrocarbons (PAHs) in Araraquara city,Southeast Brazil

In Brazil, sugar-cane crops are burned to facilitate harvesting, and this causes environmental pollution from the large amounts of smoke and soot that are released into the atmosphere. The smoke and soot contain numerous organic compounds such as PAHs. In this study, PM₁₀ and PAH concentrations in the air of Araraquara (SE Brazil, with around 200,000 inhabitants and surrounded by sugar-cane plantations) were determined during the harvest and non-harvest seasons. The sampling strategy included two campaigns in each season, with 20 samples per season. PM₁₀ was collected using a Hi-vol sampler with Teflon? – coated glass fiber filters. PM₁₀ ranged from 41 to 181 μg m^?3 during the harvest season, and from 12 to 47 μg m^?3 during the non-harvest season. The mean total concentration of PAHs was 2.5 ng m^?3 (non-harvest season) and 11.6 ng m^?3 (harvest season). In all sampling periods, the most abundant polycyclic aromatic hydrocarbons were phenanthrene and fluoranthrene, and the least abundant was anthracene. The cluster analysis of the total PAH concentrations for each day of sampling and the corresponding meteorological data suggested that the atmospheric concentration of PAHs was independent of the differences in the weather between the seasons. For both sampling seasons, the statistical treatment (PCA, Varimax rotation and HCA) indicated the presence of vehicle sources (diesel, gasoline, and natural-gas engines); but for the harvest season, the main source was attributed to sugar-cane burning. The data generated by this study indicated the burning of sugar-cane as the main contributor to the high levels of PAHs detected in samples during the sugar-cane harvest season.     

Solar-driven photocatalytic treatment as sustainable strategy to remove pesticide residues from leaching water

Environmental Science and Pollution Research - We have demonstrated the potential leaching of eight compounds, one insecticide (flonicamid) and seven fungicides (myclobutanil, penconazole,...     

Toxicological aspects of trihalomethanes: a systematic review

Environmental Science and Pollution Research - Chlorine is considered the most used chemical agent for water disinfection worldwide. However, water chlorination can lead to by-product generation...     

Feasibility of composting combinations of sewage sludge,olive mill waste and winery waste in a rotary drum reactor

Representative samples of the following biowastes typically generated in Castilla La Mancha (Spain) were composted using a pilot-scale closed rotary drum composting reactor provided with adequate control systems: waste from the olive oil industry (olive mill waste; OMW), winery–distillery waste containing basically grape stalk and exhausted grape marc (WDW), and domestic sewage sludge. Composting these biowastes was only successful when using a bulking agent or if sufficient porosity was supported. OMW waste composting was not possible, probably because of its negligible porosity, which likely caused anaerobic conditions. WDW was successfully composted using a mixture of solid wastes generated from the same winery. SS was also successfully composted, although its higher heavy metal content was a limitation. Co-composting was an adequate strategy because the improved mixture characteristics helped to maintain optimal operating conditions. By co-composting, the duration of the thermophilic period increased, the final maturity level improved and OMW was successfully composted. Using the proposed reactor, composting could be accelerated compared to classical outdoor techniques, enabling easy control of the process. Moisture could be easily controlled by wet air feeding and leachate recirculation. Inline outlet gas analysis helped to control aerobic conditions without excessive aeration. The temperature reached high values in a few days, and sufficient thermal requirements for pathogen removal were met. The correct combination of biowastes along with appropriate reactor design would allow composting as a management option for such abundant biowastes in this part of Spain.     

Preparation of Fe oxide nanoparticles for environmental applications: arsenic removal

The objective of this study is to examine the adsorption–desorption behavior of a magnetically active hybrid sorbent (MAHS) material, prepared by dispersing colloid-like hydrated iron oxide particles in the outer periphery of a macroporous ion-exchange resin (Amberlite XAD-2). The experimental results show that the new sorbent material can simultaneously remove arsenic (V) and a chlorinated organic compound (2,6-dichlorophenol [2,6-DCP]) from aqueous solutions at around neutral pH. The recovery of arsenic and 2,6-DCP from MAHS was conducted using a regenerant containing 50% (v/v) CH₃OH + 3% (w/v) NaOH. In less than 10 bed volumes of regenerant, more than 90% of As(V) and 2,6-DCP were recovered.     

Analysis and residue levels of forchlorfenuron (CPPU) in watermelons

This paper describes the application of liquid chromatography-tandem mass spectrometry (LC/MS-MS) for analysis of residues of forchlorfenuron (CPPU), a new plant growth regulator, in watermelons, after a sample preparation step based on the buffered Quick, Easy, Cheap, Effective, Rugged and Safe extraction method. Analytical determinations were carried out in a triple quadrupole system fitted with an electrospray interphase operating in the positive ionisation mode (ESI+). Three simultaneous MS-MS transitions of the quasi-molecular ion m/z 248 (precursor ion) were monitored for data adquisition (248 > 129, 248 > 155, and 248 > 248), using the transition 248 > 129 for quantitation. Recovery studies on watermelons at levels of 1–200 μ g/kg, performing five replicates at each level and using bracketing single-level calibration with matrix-matched standards for quantitation, gave forchlorfenuron mean recoveries ranging from 82 to 106% with relative standard deviations (RSD) lower than 18%. The limit of determination was established at 1 μ g/kg. The method was applied to evaluate the persistence of forchlorfenuron residues in watermelons grown in plastic greenhouses, after applying an individual spray treatment to the flower ovary at the anthesis stage (45 μ g/flower and 60 μ g/flower for cv “Extazy” and cv “reina de corazones” watermelons, respectively). One month after treatment, 20 “Extazy” watermelon units (1.5–2 kg/unit) and 20 “Reina de corazones” watermelon units (4–5 kg/unit) were collected and analyzed individually. None of the samples contained forchlorfenuron residues higher than 1 μ g/kg.     

Selective effects of natural and synthetic insecticides on mortality of Spodoptera frugiperda (Lepidoptera: Noctuidae) and its predator Eriopis connexa (Coleoptera: Coccinellidae)

Spodoptera frugiperda Smith (Lepidoptera: Noctuidae) is a serious pest of corn in several American countries. It is mainly controlled with synthetic insecticides. The objectives of this study were to evaluate the effects of the natural products, neem oil and pyroligneous extract, and the synthetic insecticide, lufenuron, at 2.50mL water (0.25 %) on the mortality of 2-, 4- and 6-day-old caterpillars of S. frugiperda, and their selectivities against fourth instar larvae of Eriopis connnexa Germar (Coleoptera: Coccinellidae). Four- and 6-day-old S. frugiperda caterpillars showed higher mortality after exposure to neem oil (83.33 ± 0.83 and 89.58 ± 0.90 %, respectively) and lufenuron (95.83 ± 0.96 and 85.41 ± 0.83 %), compared to pyroligneous extract (68.75 ± 0.69 and 31.25 ± 0.31 %). The deleterious effect of pyroligneous extract was higher in 2- (83.33 ± 0.83 % mortality) and 4-day-old (68.75 ± 0.69 %) S. frugiperda caterpillars than in 6-day-old caterpillars (31.25 ± 0.31 %). Larval mortality of the predator E. connexa was lower with neem oil and pyroligneous extract (25.00 ± 0.33 %) than with lufenuron (91.66 ± 1.22 %). Neem oil is thus recommended for control of S. frugiperda because of its high toxicity, combined with its relatively low toxicity to larvae of the natural enemy E. connexa.     

Use of different organic wastes in reducing the potential leaching of propanil,isoxaben, cadusafos and pencycuron through the soil

In this study, we examined the effect of four different organic wastes (OW)—composted sheep manure (CSM), spent coffee grounds (SCG), composted pine bark (CPB) and coir (CR)—on the potential groundwater pollution of propanil and isoxaben (herbicides), cadusafos (insecticide) and pencycuron (fungicide) under laboratory conditions. For this purpose, leaching studies were conducted using disturbed soil columns filled with a clay loam soil (Hipercalcic calcisol). The addition of organic matter (OM) drastically reduced the movement of the studied pesticides. The results obtained point to the interest in the use of agro-industrial and composted OW in reducing the groundwater pollution by pesticide drainage.     

Tailoring dam structures to water quality predictions in new reservoir projects: Assisting decision-making using numerical modeling

Selection of reservoir location, the floodable basin forest handling, and the design of dam structures devoted to water supply (e.g. water outlets) constitute relevant features which strongly determine water quality and frequently demand management strategies to be adopted. Although these crucial aspects should be carefully examined during dam design before construction, currently the development of ad hoc limnological studies tailoring dam location and dam structures to the water quality characteristics expected in the future reservoir is not typical practice. In this study, we use numerical simulation to assist on the design of a new dam project in Spain with the aim of maximizing the quality of the water supplied by the future reservoir. First, we ran a well-known coupled hydrodynamic and biogeochemical dynamic numerical model (DYRESM–CAEDYM) to simulate the potential development of anoxic layers in the future reservoir. Then, we generated several scenarios corresponding to different potential hydraulic conditions and outlet configurations. Second, we built a simplified numerical model to simulate the development of the hypolimnetic oxygen content during the maturation stage after the first reservoir filling, taking into consideration the degradation of the terrestrial organic matter flooded and the adoption of different forest handling scenarios. Results are discussed in terms of reservoir design and water quality management. The combination of hypolimnetic withdrawal from two deep outlets and the removal of all the valuable terrestrial vegetal biomass before flooding resulted in the best water quality scenario.