Evaluation of Cu-PPHs as active catalysts for the SCR process to control NOx emissions from heavy duty diesel vehicles

Copper based catalysts supported on mesoporous materials, which were in turn based on a surfactant expanded zirconium phosphate for the formation of silica galleries in the interlayer space, were prepared by the impregnation method. They were then characterised and tested in the selective catalytic reduction of NO with ammonia as active catalysts for the control of the NOx emissions from heavy duty vehicles. Copper catalysts displayed a high catalytic performance, even in the presence of 14% (v/v) of H2O and 100 ppm of SO2. They also displayed improved catalytic behaviour when compared to a CuZSM5 catalyst.     

Estimating the environmental impact of micro-pollutants in the low Ebro River (Spain): an approach based on screening toxicity with Vibrio fischeri

The aim of this study was to assess the likely impacts on the ecosystems due to agricultural, human, and industrial activities carried out in an ecologically important area of the Ebro River (Spain). For it, a screening site specific ecological risk assessment was conducted. Considering the presence of high levels of potentially toxic substances, such as metals and chlorinated organic compounds, aqueous and organic extracts were used to assess toxicity in sediments by using the photo-luminescent bacteria Vibrio fischeri (Microtox) as screening response variable. Sediment samples collected during 2005-2006 in the last course of the Ebro River and its Delta have been analyzed. Toxic responses have shown strong relationships to the levels of pollutants in the area. Moreover, various sites presented some toxicity level, probably because of other factors associated with reducing environments into the sediments. Results indicate that Microtox bioassay is an appropriate tool to perform risk assessment studies at screening level.     

Effects of long-term soil amendment with sewage sludges on soil humic acid thermal and molecular properties

Sewage sludges are frequently used as soil amendments due to their high contents of organic matter and nutrients, particularly N and P. However, their effects upon the chemistry of soil humic acids, one of the main components of the soil organic matter, need to be more deeply studied in order to understand the relation between organic matter structure and beneficial soil properties. Two sewage sludges subjected to different types of pre-treatment (composted and thermally dried) with very different chemical compositions were applied for three consecutive years to an agricultural soil under long-term field study. Thermal analysis (TG–DTG–DTA) and solid-state ¹³C NMR spectroscopy were used to compare molecular and structural properties of humic acids isolated from sewage sludges, and to determine changes in amended soils. Thermally dried sewage sludge humic acids showed an important presence of alkyl and O/N-alkyl compounds (70%) while composted sludge humic acids comprised 50% aromatic and carbonyl carbon. In spite of important differences in the initial chemical and thermal properties of the two types of sewage sludges, the chemical and thermal properties of the soil humic acids were quite similar to one another after 3 years of amendment. Long-term application of both sewage sludges resulted in 80–90% enrichment in alkyl carbon and organic nitrogen contents of the soil humic acid fraction.     

Soil vapor extraction in sandy soils: influence of airflow rate

Airflow rate is one of the most important parameters for the soil vapor extraction of contaminated sites, due to its direct influence on the mass transfer occurring during the remediation process. This work reports the study of airflow rate influence on soil vapor extractions, performed in sandy soils contaminated with benzene, toluene, ethylbenzene, xylene, trichloroethylene and perchloroethylene. The objectives were: (i) to analyze the influence of airflow rate on the process; (ii) to develop a methodology to predict the remediation time and the remediation efficiency; and (iii) to select the most efficient airflow rate. For dry sandy soils with negligible contents of clay and natural organic matter, containing the contaminants previously cited, it was concluded that: (i) if equilibrium between the pollutants and the different phases present in the soil matrix was reached and if slow diffusion effects did not occur, higher airflow rates exhibited the fastest remediations, (ii) it was possible to predict the remediation time and the efficiency of remediation with errors below 14%; and (iii) the most efficient remediation were reached with airflow rates below 1.2 cm(3)s(-1) standard temperature and pressure conditions.     

Concentrations of PCDD/PCDFs in plasma of subjects living in the vicinity of a hazardous waste incinerator: follow-up and modeling validation

In 2007, the concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDFs) were determined in plasma of non-occupationally exposed subjects living near the only hazardous waste incinerator (HWI) in Spain (Constantí, Tarragona County, Catalonia). These data were compared with the levels found in two previous surveys performed in 1998 (baseline) and 2002. The current mean PCDD/PCDF concentration in plasma was 9.36pg I-TEQg(-1) of lipid (range: 1.76-23.44pg I-TEQg(-1) of lipid). It means a significant reduction of the mean PCDD/PCDFs levels in plasma in comparison to the concentrations found in 1998 and 2002 (27.01 and 15.70pg I-TEQg(-1) of lipid, respectively). This important decrease agrees well with the notable reduction in the dietary intake of PCDD/PCDFs recently noted for the population of the same area (210.1pg I-TEQd(-1), 63.8pgWHO-TEQd(-1), and 27.8pgWHO-TEQd(-1), in 1998, 2002 and 2007, respectively). The current data were also used to predict theoretical PCDD/PCDF concentrations in plasma by executing a single-compartment empirically-based pharmacokinetic model on the basis of the daily intake of these pollutants by the local population.     

Patterns of growth and fluctuating asymmetry: the effects of asymmetrical investment in traits with determinate growth

Fluctuating asymmetry (FA, small and random deviations from perfect symmetry in otherwise bilaterally symmetrical traits) is assumed to depend directly on developmental stability (DS). However, since the processes related to DS operate at a microscopic level, the translation of microscopic errors to the macroscopic character asymmetries (i.e. the DS-FA relation) could be mediated by the cost of growth. To investigate the consequences of this hypothesis, I constructed a model with the following assumptions: the degree of development of a trait depends on the amount of resources allocated to growth, which may differ between individuals and between traits; the cost of growth increases with development, and developmental noise causes random asymmetries in biosynthesis in the two sides of the body. The model predicts that FA follows a parabolic trajectory as growth investment levels increase, regardless of DS. However, depending on the range of variation of investment levels, different relationships (positive, negative or flat) between trait size and asymmetry could be expected. This model may also explain why FA is correlated with the degree of stress in some traits but not in others, and why some traits present a higher level of FA than others. The model also suggests that FA measured on growing traits, at a certain size, could be a more reliable indicator of DS than FA measured on fully grown traits. A study analysing FA patterns of developing and fully grown feathers in the house sparrow (Passer domesticus) corroborates that the levels of FA, and the relationship between asymmetry and feather length, depend on the degree of feather development.     

Influence of humic substances on the photolysis of aqueous pesticide residues

The present work investigated the direct and indirect photolysis of pesticide residues (atrazine, imazaquin, iprodione), in aqueous solutions and under UV-visible radiation (280-480nm). Different kinds of humic substances (HS) were added to samples in order to evaluate their behaviour as possible photocatalysts and their effect on the photolysis of pesticides. The fulvic acids were purchased from the International Humic Substances Society, and they were added to samples in concentrations ranging from 1 to 150 mgl(-1). Titanium dioxide was used as the photocatalyst, in concentration ranging from 10 to 150 mgl(-1). Pesticides photolysis were measured by UV-visible absorption spectroscopy and differential pulse polarography with all used pesticides, reaching total degradation after 2h of irradiation, thus indicating a fast direct photolysis. Photocatalysis by TiO(2) could increase the pesticides photolysis rate up to 40%. This effect, however, was not observed for imazaquin photolysis. Again, except for imazaquin, HS presence showed a positive effect in increasing pesticide degradation, but only within specific concentration ranges (below 10mg l(-1) for iprodione and about 30mgl(-1) for atrazine). Above these ranges HS induce a decrease in the pesticides photolysis rate. Spin-trapping measurements by electronic paramagnetic resonance spectroscopy, using the spin-trap DMPO, showed that HS are able to photogenerate hydroxyl radicals, increasing the pesticides molecule degradation. However, the HS also react with the photogenerated hydroxyl radical, influencing the pesticide photolysis, leading to a decrease in the photolysis rate and causing it to be strongly dependent on the nature and concentration of residues in the water to be treated.     

PM sources in a highly industrialised area in the process of implementing PM abatement technology. Quantification and evolution

Principal component analysis (PCA) coupled with a multilinear regression analysis (MLRA) was applied to PM(10) speciation data series (2002-2005) from four sampling sites in a highly industrialised area (ceramic production) in the process of implementing emission abatement technology. Five common factors with similar chemical profiles were identified at all the sites: mineral, regional background (influenced by the industrial estate located on the coast: an oil refinery and a power plant), sea spray, industrial 1 (manufacture and use of glaze components, including frit fusion) and road traffic. The contribution of the regional background differs slightly from site to site. The mineral factor, attributed to the sum of several sources (mainly the ceramic industry, but also with minor contributions from soil resuspension and African dust outbreaks) contributes between 9 and 11 microg m(-3) at all the sites. Source industrial 1 entails an increase in PM(10) levels between 4 and 5 microg m(-3) at the urban sites and 2 microg m(-3) at the suburban background site. However, after 2004, this source contributed less than 2 microg m(-3) at most sites, whereas the remaining sources did not show an upward or downward trend along the study period. This gradual decrease in the contribution of source industrial 1 coincides with the implementation of PM abatement technology in the frit fusion kilns of the area. This relationship enables us to assess the efficiency of the implementation of environmental technologies in terms of their impact on air quality.     

Arsenic speciation of atmospheric particulate matter (PM10) in an industrialised urban site in southwestern Spain

An arsenic speciation study has been performed in PM10 samples collected on a fortnight basis in the city of Huelva (SW Spain) during 2001 and 2002. The arsenic species were extracted from the PM10 filters using a NH2OH x HCl solution and sonication, and determined by HPLC-HG-AFS. The mean bulk As concentration of the samples analyzed during 2001 and 2002 slightly exceed the mean annual 6 ng m(-3) target value proposed by the European Commission for 2013, arsenate [As(V)] being responsible for the high level of arsenic. The speciation analyses showed that As(V) was the main arsenic species found, followed by arsenite [As(III)] (mean 6.5 and 7.8 ng m(-3) for As(V), mean 1.2 and 2.1 ng m(-3) for As(III), in 2001 and 2002, respectively). The high levels of arsenic species found in PM10 in Huelva have a predominant industrial origin, such as the one from a nearby copper smelter, and do not present a seasonal pattern. The highest daily levels of arsenic species correspond to synoptic conditions in which the winds with S and SW components transport the contaminants from the main emission source. The frequent African dust outbreaks over Huelva may result in an increment of mass levels of PM10, but do not represent a significant input of arsenic in comparison to the anthropogenic source. The rural background levels of arsenic around Huelva are rather high, in comparison to other rural or urban areas in Spain, showing a relatively high atmosphere residence time of arsenic. This work shows the importance of arsenic speciation in studies of aerosol chemistry, due to the presence of arsenic species [As(III) and As(V)] with distinct toxicity.