Performance Assessment of a 3D Hydrodynamic Model Using High Temporal Resolution Measurements in a Shallow Urban Lake

Urban lakes provide many ecosystem services, e.g., flood control, nature protection, coolness island, recreation. Hydrodynamic models will increasingly be used to enhance these benefits. We present the first validation of a three-dimensional (3D) hydrodynamic model on a small shallow lake with high resolution and high frequency measurements. Lake Créteil, France (area 0.4 km², mean depth 4.5 m, and catchment area 1 km²) is a former gravel pit and now part of a regional park. The model Delft3D-FLOW was calibrated on a one-month period, with continuous measurements of temperature at five depths at the center of the lake and at three depths at two other stations, and with current speed profiles at the centre of the lake. The model was then verified on 18 1-month periods with similar temperature measurements. The model reproduced very well the temperature dynamics, including the alternation between mixing and stratification periods and internal wave patterns. The mean absolute errors over the five depths at the central point remained below 0.55^°C in spring and summer, the most favorable seasons for phytoplankton growth. Horizontal temperature differences, which rose up to 3^°C at the beginning of stratification periods, were also well reproduced, as well as current speeds. These results are very promising for assessing nutrient and pollutant diffusion, settling and resuspension, as well as for understanding how phytoplankton blooms start in small shallow lakes.     

Preliminary toxicological assessment of phthalate esters from drinking water consumed in Portugal

This paper reports, for the first time, the concentrations of selected phthalates in drinking water consumed in Portugal. The use of bottled water in Portugal has increased in recent years. The main material for bottles is polyethylene terephthalate (PET). Its plasticizer components can contaminate water by leaching, and several scientific studies have evidenced potential health risks of phthalates to humans of all ages. With water being one of the most essential elements to human health and because it is consumed by ingestion, the evaluation of drinking water quality, with respect to phthalate contents, is important. This study tested seven commercial brands of bottled water consumed in Portugal, six PET and one glass (the most consumed) bottled water. Furthermore, tap water from Lisbon and three small neighbor cities was analyzed. Phthalates (di-n-butyl phthalate ester (DnBP), bis(2-ethylhexyl) phthalate ester (DEHP), and di-i-butyl phthalate ester (DIBP)) in water samples were quantified (PET and glass) by means of direct immersion solid-phase microextraction and ionic liquid gas chromatography associated with flame ionization detection or mass spectrometry due to their high boiling points and water solubility. The method utilized in this study showed a linear range for target phthalates between 0.02 and 6.5 μg L^?1, good precision and low limits of detection that were between 0.01 and 0.06 μg L^?1, and quantitation between 0.04 and 0.19 μg L^?1. Only three phthalates were detected in Portuguese drinking waters: dibutyl (DnBP), diisobutyl (DIBP), and di(ethylhexyl) phthalate (DEHP). Concentrations ranged between 0.06 and 6.5 μg L^?1 for DnBP, between 0.02 and 0.16 μg L^?1 for DEHP, and between 0.1 and 1.89 μg L^?1 for DIBP. The concentration of DEHP was found to be up to five times higher in PET than in glass bottled water. Surprisingly, all the three phthalates were detected in glass bottled water with the amount of DnBP being higher (6.5 μg L^?1) than in PET bottled water. These concentrations do not represent direct risk to human health. Regarding potable tap water, only DIBP and DEHP were detected. Two of the cities showed concentration of all three phthalates in their water below the limits of detection of the method. All the samples showed phthalate concentrations below 6 μg L^?1, the maximum admissible concentration in water established by the US Environmental Protection Agency. The concentrations measured in Portuguese bottled waters do not represent any risk for adult's health.     

What do caprellids (Crustacea: Amphipoda) feed on?

The present study represents the first comprehensive work dealing with the dietary analysis of Caprellidea. We studied 743 specimens of 31 genera and 62 species from all around the world. Analysis of digestive contents revealed that caprellids are mainly detritivores (detritus represented the 86% of the caprellid diet), but a small percentage of species, those lacking molars belonging to the Phtisicinae, can be considered as obligate predators and feed mainly on small crustaceans (copepods and other amphipods) and polychaetes. The contribution of sponges, hydroids, macroalgae, diatoms and dinoflagellates to the caprellid diet was very low (<2%). Apart from the clear relationship between the absence of molar process and predators, no other correlations between digestive contents and mouthpart structure were found. Cluster analysis based on the dietary data indicated a patent segregation between the Phtisicinae (obligate predators) and Caprellinae (detritivores, detritivores/predators or opportunistics) and could support the hypothesis of basal divergence in two major lines of evolution: Phtisicinae and Caprogammaridae–Caprellinae. Consequently, the debate questioning if the taxon Caprellidea is a monophyletic group or not is still open. Additional morphological, molecular and behavioral studies are necessary to define the evolutionary relationships in this group of crustaceans.     

Baseline levels of bioaerosols and volatile organic compounds around a municipal waste incinerator prior to the construction of a mechanical-biological treatment plant

New waste management programs are currently aimed at developing alternative treatment technologies such as mechanical–biological treatment (MBT) and composting plants. However, there is still a high uncertainty concerning the chemical and microbiological risks for human health, not only for workers of these facilities, but also for the population living in the neighborhood. A new MBT plant is planned to be constructed adjacently to a municipal solid waste incinerator (MSWI) in Tarragona (Catalonia, Spain). In order to evaluate its potential impact and to differentiate the impacts of MSWI from those of the MBT when the latter is operative, a pre-operational survey was initiated by determining the concentrations of 20 volatile organic compounds (VOCs) and bioaerosols (total bacteria, Gram-negative bacteria, fungi and Aspergillus fumigatus) in airborne samples around the MSWI. The results indicated that the current concentrations of bioaerosols (ranges: 382–3882, 18–790, 44–926, and <1–7 CFU/m³ for fungi at 25 °C, fungi at 37 °C, total bacteria, and Gram-negative bacteria, respectively) and VOCs (ranging from 0.9 to 121.2 μg/m³) are very low in comparison to reported levels in indoor and outdoor air in composting and MBT plants, as well in urban and industrial zones. With the exception of total bacteria, no correlations were observed between the environmental concentrations of biological agents and the direction/distance from the facility. However, total bacteria presented significantly higher levels downwind. Moreover, a non-significant increase of VOCs was detected in sites closer to the incinerator, which means that the MSWI could have a very minor impact on the surrounding environment.     

An approach for determining air pollution monitoring sites

EC Directive 2008/50/CE on ambient air quality and cleaner air for Europe specifies the obligations of Member States regarding fixed measurements of atmospheric pollutants in areas where maximum concentration levels exceed the lower assessment threshold. However, indications as to the siting of atmospheric monitoring stations are less precise and sometimes confusing. Campaigns to measure benzene and other volatile organic compounds in Murcia in 2007 and 2008 revealed that the areas where measurements coincided with the mean concentration for the whole city were always practically the same. Consequently, we propose a method for siting atmospheric monitoring stations in cities for which emission sources remain steady throughout the year, as is the case for cities in most southern European countries, where the most important emission source is traffic. The method is particularly useful for towns in which only one fixed measuring point is compulsory and should help local authorities in making correct decisions in this context.     

Contribution of sugar-cane harvesting season to atmospheric contamination by polycyclic aromatic hydrocarbons (PAHs) in Araraquara city,Southeast Brazil

In Brazil, sugar-cane crops are burned to facilitate harvesting, and this causes environmental pollution from the large amounts of smoke and soot that are released into the atmosphere. The smoke and soot contain numerous organic compounds such as PAHs. In this study, PM₁₀ and PAH concentrations in the air of Araraquara (SE Brazil, with around 200,000 inhabitants and surrounded by sugar-cane plantations) were determined during the harvest and non-harvest seasons. The sampling strategy included two campaigns in each season, with 20 samples per season. PM₁₀ was collected using a Hi-vol sampler with Teflon? – coated glass fiber filters. PM₁₀ ranged from 41 to 181 μg m^?3 during the harvest season, and from 12 to 47 μg m^?3 during the non-harvest season. The mean total concentration of PAHs was 2.5 ng m^?3 (non-harvest season) and 11.6 ng m^?3 (harvest season). In all sampling periods, the most abundant polycyclic aromatic hydrocarbons were phenanthrene and fluoranthrene, and the least abundant was anthracene. The cluster analysis of the total PAH concentrations for each day of sampling and the corresponding meteorological data suggested that the atmospheric concentration of PAHs was independent of the differences in the weather between the seasons. For both sampling seasons, the statistical treatment (PCA, Varimax rotation and HCA) indicated the presence of vehicle sources (diesel, gasoline, and natural-gas engines); but for the harvest season, the main source was attributed to sugar-cane burning. The data generated by this study indicated the burning of sugar-cane as the main contributor to the high levels of PAHs detected in samples during the sugar-cane harvest season.     

Solar-driven photocatalytic treatment as sustainable strategy to remove pesticide residues from leaching water

Environmental Science and Pollution Research - We have demonstrated the potential leaching of eight compounds, one insecticide (flonicamid) and seven fungicides (myclobutanil, penconazole,...     

Feasibility of composting combinations of sewage sludge,olive mill waste and winery waste in a rotary drum reactor

Representative samples of the following biowastes typically generated in Castilla La Mancha (Spain) were composted using a pilot-scale closed rotary drum composting reactor provided with adequate control systems: waste from the olive oil industry (olive mill waste; OMW), winery–distillery waste containing basically grape stalk and exhausted grape marc (WDW), and domestic sewage sludge. Composting these biowastes was only successful when using a bulking agent or if sufficient porosity was supported. OMW waste composting was not possible, probably because of its negligible porosity, which likely caused anaerobic conditions. WDW was successfully composted using a mixture of solid wastes generated from the same winery. SS was also successfully composted, although its higher heavy metal content was a limitation. Co-composting was an adequate strategy because the improved mixture characteristics helped to maintain optimal operating conditions. By co-composting, the duration of the thermophilic period increased, the final maturity level improved and OMW was successfully composted. Using the proposed reactor, composting could be accelerated compared to classical outdoor techniques, enabling easy control of the process. Moisture could be easily controlled by wet air feeding and leachate recirculation. Inline outlet gas analysis helped to control aerobic conditions without excessive aeration. The temperature reached high values in a few days, and sufficient thermal requirements for pathogen removal were met. The correct combination of biowastes along with appropriate reactor design would allow composting as a management option for such abundant biowastes in this part of Spain.