Air-vegetation transfer of PCDD/PCDFs: an assessment of field data and implications for modeling

This study was designed to evaluate soil and air (gas and particle) transfer of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) to vegetation in residential and industrial areas. In a first part, soil-vegetation transfer was assessed. The levels of PCDD/Fs in 120 soil and 120 herbage samples collected from 1996 to 2002 in an industrial area of Montcada (Barcelona, Spain), near a municipal solid waste incinerator (MSWI), were determined. Some additional individual samples were also evaluated. It was concluded that high soil concentrations, which are not at steady state with the air layer above it, show a tendency for PCDD/Fs to escape via volatilization. In a second part of the study, air-vegetation transfer was examined. PCDD/F concentrations from 24 herbage samples were used, while PCDD/F concentrations were also measured in seven high-volume air samples and seven passive air-vapor samples. Scavenging coefficients (m3 air "sampled"/g grass d.m.) ranged from 1.9 to 11.3 m3/g. A good trend with K(OA) was observed for PCDDs (R=0.82), while it was lower for PCDFs (R=0.55). The current results corroborate that PCDD/F concentrations in vegetation are associated with atmospheric deposition. For the highest substituted PCDD/F congeners, the air-particle uptake from plants is the principal pathway. In regions impacted by combustion emission sources, PCDD/F gas-particle partitioning is influenced by a higher concentration of particles in the air. Particles and associated particle-bound PCDD/Fs would sorb to leaf surfaces, and are subject to removal via wash off. However, in areas where emissions to air are not very notable, vapor absorption would be the principal source of vegetation pollution. The results of this investigation can have a potential interest in risk assessment studies and environmental fate models.     

Protection from steam at high pressures: development of a test device and protocol.

Extensive use of pressurized steam in the oil and gas sectors has led to incidents where workers were seriously injured. In this study a test device and procedure to measure heat transfer through fabrics during steam exposure were developed and evaluated. Several factors were considered while designing the test device to simulate work site conditions. Fabrics were exposed to steam at 2 distances (50 and 100 mm) and 2 pressures (207 and 69 kPa). Theoretical considerations included heat and mass transfer, and fabric structure and performance properties. The test device and procedure differentiated well among both fabrics and exposure conditions. For all fabrics, maximum heat transfer was observed at highest steam pressure and shortest distance. Laminated and coated fabrics performed better than a fabric without such treatments.     

Non-linear pathways of corporate environmental management: a survey of ISO 14001-certified companies in Brazil

A study was conducted to verify whether the theory on the evolution of corporate environmental management (CEM) is applicable to organizations located in Brazil. Some of the most important proposals pertaining to the evolution of CEM were evaluated in a systematic fashion and integrated into a typical theoretical framework containing three evolutionary stages: reactive, preventive and proactive. The validity of this framework was tested by surveying 94 companies located in Brazil with ISO 14001 certification. Results indicated that the evolution of CEM tends to occur in a manner that is counter to what has generally been described in the literature. Two evolutionary stages were identified: 1) synergy for eco-efficiency and 2) environmental legislation view, which combine variables that were initially categorized into different theoretical CEM stages. These data, obtained from a direct study of Brazilian companies, suggest that the evolution of environmental management in organizations tends to occur in a non-linear fashion, requiring a re-analysis of traditional perceptions of CEM development, as suggested by Kolk and Mauser (2002).     

Learning Machines Applied to Potential Forest Distribution

The clearing of forests to obtain land for pasture and agriculture and the replacement of autochthonous species by other faster-growing varieties of trees for timber have both led to the loss of vast areas of forest worldwide. At present, many developed countries are attempting to reverse these effects, establishing policies for the restoration of older woodland systems. Reforestation is a complex matter, planned and carried out by experts who need objective information regarding the type of forest that can be sustained in each area. This information is obtained by drawing up feasibility models constructed using statistical methods that make use of the information provided by morphological and environmental variables (height, gradient, rainfall, etc.) that partially condition the presence or absence of a specific kind of forestation in an area. The aim of this work is to construct a set of feasibility models for woodland located in the basin of the River Liébana (NW Spain), to serve as a support tool for the experts entrusted with carrying out the reforestation project. The techniques used are multilayer perceptron neural networks and support vector machines. Their results will be compared to the results obtained by traditional techniques (such as discriminant analysis and logistic regression) by measuring the degree of fit between each model and the existing distribution of woodlands. The interpretation and problems of the feasibility models are commented on in the Discussion section.     

Wind power projects in Brazil: challenges and opportunities increasing co-benefits and implications for climate and energy policies

The purpose of this article is to analyze the challenges to, and opportunities for, increasing sustainable development (SD) co-benefits delivered by clean development mechanism (CDM) wind power projects in northeastern Brazil and the resulting implications for climate and energy policies. Five methodological phases were met: First, a documentary research was conducted in the main CDM database; second was a literature review, creating the analytical framework and a survey questionnaire needed to assess the SD co-benefits from the projects; third, documentary research was used to enable ex-ante analysis of the SD co-benefits proposed in the CDM Project Design Documents (PDDs); fourth, survey allowed for the analysis of SD co-benefits perceived by project entrepreneurs (ex-post analysis); and finally, a comparison between the ex-ante and ex-post analyses was completed. The results show the importance of carrying out SD co-benefit studies after the implementation of CDM projects in order to learn lessons for new mechanisms of climate governance. The lowest SD co-benefits were water management improvement in the project influence area, soil pollution prevention, health and safety improvements and technology transfer. The greatest opportunities for increasing SD co-benefits come from the environmental licensing process and the strengthening of Corporate Social Responsibility. The greatest challenges are new technology development, stakeholders’ engagement and SD co-benefit audits. We conclude that the improvement of multi-level climate and energy governance plays a key role in increasing SD co-benefits.

     

Adsorption of picloram on clays nontronite,illite and kaolinite: equilibrium and herbicide-clays surface complexes

The picloram (PCM) adsorption on nontronite, illite and kaolinite was studied at pH 3, 5 and 7. The adsorption isotherms had well-fitted to Langmuir and Freundlich models equations. The interactions of PCM with the clay mineral surfaces exhibited an anionic profile adsorption, with a decrease in adsorption when the pH increases. The PCM adsorption capacity increases in the following order: kaolinite?<?illite?<?nontronite. The X-ray diffraction (XRD) analysis of PCM-clay samples revealed that the picloram molecule does not enter into the clays basal space. The interaction of PCM with clays surface sites through nitrogen of the pyridine ring was confirmed by X-ray photoelectron spectroscopy (XPS). Due to the anionic form of PCM, the adsorption onto the external and edges surface sites of the clay minerals was proposed.     

Landslide Susceptibility Assessment and Validation in the Framework of Municipal Planning in Portugal: The Case of Loures Municipality

The legislation that demands the evaluation of landslide susceptibility in Portugal at the municipal level is the National Ecological Reserve (NER). A methodology for the evaluation of landslide susceptibility to be used in municipal planning is applied in Loures Municipality (169.3?km2) located north of Lisbon (Portugal). A landslide inventory was made for the whole area interpreting orthophoto maps and aerial photographs and using standard geomorphologic techniques in field work. It consists of 686 polygons, each polygon representing a rotational, a deep translational or a shallow translational slide, and is integrated into a GIS database. Landslide susceptibility is evaluated using algorithms based on statistical/probabilistic analysis (Information Value Method) over unique-condition terrain units in a raster basis. Three susceptibility models are elaborated independently according to the type of slide (rotational, deep translational, shallow translational). The landslide susceptibility maps are prepared by sorting all pixels according to the pixel susceptibility value in descending order. The robustness and accuracy of the landslide susceptibility models are evaluated by prediction-rate curves, which are used for the quantitative interpretation of the landslide susceptibility maps. Unstable slopes that have to be included into the National Ecological Reserve are extracted from the three susceptibility maps following the general rules to draw the NER that state that the area to be included in the NER should guarantee the inclusion of at least 70?% of the landslides identified in the landslide inventory. The obtained results allow us to conclude that 70?% of the future landslides should occur in these areas, classified as most susceptible to landslides corresponding to 20.3?% of the total area of Municipality. Thus, the consideration of these 20.3?% as regards prevention and protection of landslide risk could potentially reduce damage resulting from 70?% of future landslides in the Loures Municipality.