Risk-based optimization of the design of on-shore pipeline shutdown systems

Crude oil and other liquid materials are transported in large quantities through pipelines. Pipelines are an efficient and safe transport way as compared to both rail and road transportation, both from the economical and environmental points of view. Nevertheless, loss of containment accidents can occur due to external action –a mechanical impact, for example– or to corrosion, aging, etc. Even though the frequency of such events is certainly very low, the effects and consequences on environment can be very important.The consequences of accidents in pipelines can be efficiently reduced through a suitable design of the whole system. One of the points which must be decided in the design is the installation of blocking valves at appropriate distances, so that emergency shutdowns can interrupt the flow of substance and isolate the section where the loss of containment has taken place. In the case of pipe rupture the amount released is therefore limited to the content between two consecutive valves, usually placed according to heuristic criteria. However, if too many valves are used, the capital cost of equipment increases excessively, and if too few are used, the risk of serious accidents increases.In this paper we consider the possibility of improving the design of such systems by applying risk-based optimization criteria. We propose an optimization methodology to solve this conflict by means of an objective function that analyzes the variations in overall costs, including the cost of the investment (with specific reference to blocking valves) and the cost of accidents. The result is an optimum situation in which costs are kept to a minimum. As an example, we apply the methodology to the transportation of gasoline by pipeline.     

Surveillance programme on dioxin levels in ambient air sites in Catalonia (Spain)

As part of a survey programme conducted by the Environment Department of the Autonomous Government of Catalonia in collaboration with the Spanish Council for Scientific Research (CSIC), dioxin concentrations in ambient air were measured in the four provinces of Catalonia (Spain). The study was also performed with the intention of providing data as a basis for future monitoring and evaluation of temporal trends in ambient air. Thus, 91 samples were collected in 25 different sites (rural, urban, suburban and industrial) between 1994 and 2000. The levels revealed a variable content of PCDDs/PCDFs depending both on the area and the contamination source. In particular, industrial areas presented levels ranging from 18 to 954 fg I-TEQ/m3. However, findings in urban and suburban sites varied between 13 and 357 fg I-TEQ/m3. As expected, the lowest levels were found in rural areas with levels between 5 and 125 fg I-TEQ/m3.     

An episode of dioxin contamination in feedingstuff: the choline chloride case

In 2000, as part of a survey programme, the German authorities detected high levels of dioxins in a choline chloride (CC) premix used as animal food component. The contaminated additive consisted of different products of mineral and vegetable origin acting as a carrier. The CC was manufactured in Belgium. The final product was produced in and distributed from a plant in Spain. The German authorities informed all European Community members of the incident. The Spanish Ministry of Agriculture, Fisheries and Food and the Regional Authorities immediately conducted a survey in collaboration with the Spanish Council for Scientific Research (CSIC) to determine and isolate the source of the contamination. Analysis of a large number of samples of pure CC, pine sawdust, almond shell and other substances currently used in the preparation of the premix confirmed the presence of a significant amount of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans in mixtures in which pine sawdust was present. An analysis of the congener profiles revealed similarities with those found in technical pentachlorophenol (PCP) formulations. The conclusion was that PCP-contaminated sawdust as carrier for CC was source of dioxin contamination in feedingstuff.     

Screening ecological risk assessment of persistent organic pollutants in Mediterranean sea sediments

A screening ecological risk assessment (ERA) was conducted for the first time in the Mediterranean basin in order to assess the toxicity posed to the benthic community by PCBs, DDTs and HCB in marine sediments. The characterization of the exposure was conducted by means of an extensive literature survey, generating a database with more than 2000 samples. The effects were assessed by the adoption of guidelines previously developed in the literature, because ecotoxicological information about persistent organic pollutants (POPs) in the Mediterranean sediments was lacking. Existing sediment quality guidelines (SQGs) for the target pollutants were compiled and consensus values were calculated for three different categories of toxicity, namely threshold effect concentration (TEC), probable effect concentration (PEC) and extreme effect concentration (EEC). The combination of exposure and effects characterization enabled the identification of some areas of concern in the vicinity of industrial and urban locations and in the mouths of the main Mediterranean rivers. Beyond the Mediterranean continental shelf, the level of toxicity for the benthic community was generally low. The evaluation of the toxicity induced by the mixture of the target pollutants spotted the importance of DDT contamination in the Mediterranean sediments, despite the fact that main inputs to the sea have been significantly reduced during the last decades.     

Introduction of the Factor of Partitioning in the Lithogenic Enrichment Factors of Trace Element Bioaccumulation in Plant Tissues

Bioindicators are widely used in the study of trace elements inputs into the environment and great efforts have been conducted to separate atmospheric from soil borne inputs on biomass accumulation. Many monitoring studies of trace element pollution take into account the dust particles located in the plant surface plus the contents of the plant tissues. However, it is usually only the trace element content in the plant tissues that is relevant on plant health. Enrichment factor equations take into account the trace element enrichment of biomasses with respect soil or bedrocks by comparing the ratios of the trace element in question to a lithogenic element, usually Al. However, the enrichment equations currently in use are inadequate because they do not take into account the fact that Al (or whichever reference element) and the element in question may have different solubility-absorption-retention levels depending on the rock and soil types involved. This constrain will become critical when results from different sites are compared and so in this article we propose that the solubility factors of each element are taken into account in order to overcome this constrain. We analysed Sb, Co, Ni, Cr, Pb, Cd, Mn, V, Zn, Cu, As, Hg, and Al concentration in different zones of Catalonia (NE Spain) using the evergreen oak Quercus ilex and the moss Hypnum cupressiforme as target species. We compared the results obtained in rural and non industrial areas with those from the Barcelona Metropolitan Area. We observed differences in Al concentrations of soils and bedrocks at each different site, together with the differences in solubility between Al and the element in question, and a weak correlation between total soil content and water extract content through different sites for most trace elements. All these findings show the unsuitability of the current enrichment factors for calculating lithospheric and atmospheric contributions to trace element concentrations in biomass tissues. The trace element enrichment factors were calculated by subtracting the part predicted by substrate composition (deduced from water extracts from soils and bedrock) from total concentrations. Results showed that for most of the trace elements analysed, trace elements enrichment factors were higher inside the Barcelona Metropolitan Area than outside, a finding that indicates that greater atmospheric inputs occur in urban areas. The results show that the most useful and correct way of establishing a reference for lithospheric and atmospheric inputs into the plant tissues is, first, to analyse samples of the same plant species collected from a number of sites possessing similar environmental conditions (climate, vegetation type, soil type) and, second, to use this new enrichment factor obtained by subtracting from the total concentration in plant tissue the predicted contribution of soil or bedrock extracts instead of that of total soil or bedrock concentrations.     

Dependence of Ozone Biomonitoring on Meteorological Conditions of Different Sites in Catalonia (N.E. Spain)

Evaluation of visual symptoms of ozone damage was conducted in the network of bioindicator rural stations of Catalonia (NE Spain) every 14 days from May to October. Damage rates of ozone (and consequently, ozone biomonitoring capacity of bioindicators) were found to vary highly in time and space depending on the local environmental and meteorological conditions. Lower ozone damage to foliage was produced when meteorological conditions favour stomata resistance. Modulatory effects of meteorological conditions need to be considered in biomonitoring and when modeling plant ozone doses and damage.     

Occurrence of cyclophosphamide and epirubicin in wastewaters by direct injection analysis–liquid chromatography–high-resolution mass spectrometry

Background, aim, and scope

According to the high incidence of cancer worldwide, the amount of cytostatic drugs administered to patients has increased. These compounds are excreted to wastewaters, and therefore become potential water contaminants. At this stage, very little is known on the presence and elimination of cytostatic compounds in wastewater treatment plants (WWTP). The aim of this study was to develop a liquid chromatography?Chigh-resolution mass spectrometry (LC?COrbitrap?CMS) method for the determination of cyclophosphamide and epirubicin in wastewaters. These compounds represent two outmost used cytostatic agents.

Materials and methods

Extraction and analytical conditions were optimized for cyclophosphamide and epirubicin in wastewater. Both solid-phase extraction using Oasis 200?mg hydrophilic?Clipophilic balanced (HLB) cartridges and direct injection analysis were evaluated. Mass spectral characterization and fragmentation conditions were optimized at 50,000 resolving power (full width at half maximum, m/z 200) to obtain maximum sensitivity and identification performance. Quality parameters (recoveries, limits of detection, and repetitivity) of the methods developed were determined, and best performance was obtained with direct water analysis of the centrifuged wastewater. Finally, this method was applied to determine the presence of cyclophosphamide and epirubicin in wastewaters from a hospital effluent, an urban effluent, and influents and effluents from three WWTP.

Results and discussion

Cyclophosphamide and epirubicin were recovered after 50?mL preconcentration on solid-phase extraction 200?mg Oasis HLB cartridges (87% and 37%, respectively), and no breakthrough was observed by extracting 500?mL of water. Limits of detection were of 0.35 and 2.77?ng/L for cyclophosphamide and epirubicin, respectively. On the other hand, direct injection of water spiked at 1???g/L provided recoveries of 107% for cyclophosphamide and 44% for epirubicin and limits of detection from 3.1 to 85?ng?L^?1, respectively. The analysis of wastewaters using direct injection analysis revealed the presence of cyclophosphamide and epirubicin in WWTP influents and hospital and urban effluents at levels ranging from 5.73 to 24.8???g?L^?1.

Conclusions

The results obtained in this study demonstrate the capability of LC?COrbitrap?CMS for accurate trace analysis of these very polar contaminants. This method permitted to identify cyclophosphamide and epirubicin in wastewaters and influents of WWTP, but no traces were detected in WWTP effluents. The methodology herein developed is sensitive and robust and applicable for screening of a large number of samples since no preconcentration is needed.     

Comparing the response of biochemical indicators (biomarkers) and biological indices to diagnose the ecological impact of an oil spillage in a Mediterranean river (NE Catalunya, Spain)

Three biomarkers of hydrocarbon exposure, liver 7-ethoxyresourfin-O-deethylase activity (EROD), fluorescent hydrocarbon compounds (FACs) in bilis, and the liver antioxidant enzyme catalase (CAT) were examined in the autochthonous fish species Barbus meridionalis collected in the river Fluvià (NE Catalunya, Spain) after an oil spillage. Four different locations were sampled, including the impacted site, upstream and downstream sites and a reference site. Biomarker responses were compared with diatom and macroinvertebrate community assemblage metrics (Specific Pollution Sensitivity index - IPS, and Iberian Biological Monitoring Working Party - IBMWP, respectively). Chemical analyses denoted that polycyclic aromatic hydrocarbon levels in sediment were much higher at the impacted site than in downstream reaches. Four fold increase of EROD activity together with increased levels of biliary FACs in barbs collected at the spilled site indicated exposure of inhabiting fish to the oil. Additionally, CAT activity was significantly depressed (four fold) when compared to other stations, thus suggesting that fish collected from the impacted sites could be more susceptible to suffer oxidative stress. Biological indices (particularly that of the diatom community IPS) showed slight significant effects between control and impacted sites, indicating that more tolerant taxa were favoured because of the oil spillage. These results support the need to include biochemical responses measured in local species in monitoring programmes aimed to diagnose specific pollution effects in stressed river ecosystems.     

Ecological risk assessment of organic waste amendments using the species sensitivity distribution from a soil organisms test battery

Safe amendment rates (the predicted no-effect concentration or PNEC) of seven organic wastes were estimated from the species sensitivity distribution of a battery of soil biota tests and compared with different realistic amendment scenarios (different predicted environmental concentrations or PEC). None of the wastes was expected to exert noxious effects on soil biota if applied according either to the usual maximum amendment rates in Europe or phosphorus demands of crops (below 2 tonnes DM ha⁻¹). However, some of the wastes might be problematic if applied according to nitrogen demands of crops (above 2 tonnes DM ha⁻¹). Ammonium content and organic matter stability of the studied wastes are the most influential determinants of the maximum amendment rates derived in this study, but not pollutant burden. This finding indicates the need to stabilize wastes prior to their reuse in soils in order to avoid short-term impacts on soil communities.