Ecological risk assessment of organic waste amendments using the species sensitivity distribution from a soil organisms test battery

Safe amendment rates (the predicted no-effect concentration or PNEC) of seven organic wastes were estimated from the species sensitivity distribution of a battery of soil biota tests and compared with different realistic amendment scenarios (different predicted environmental concentrations or PEC). None of the wastes was expected to exert noxious effects on soil biota if applied according either to the usual maximum amendment rates in Europe or phosphorus demands of crops (below 2 tonnes DM ha⁻¹). However, some of the wastes might be problematic if applied according to nitrogen demands of crops (above 2 tonnes DM ha⁻¹). Ammonium content and organic matter stability of the studied wastes are the most influential determinants of the maximum amendment rates derived in this study, but not pollutant burden. This finding indicates the need to stabilize wastes prior to their reuse in soils in order to avoid short-term impacts on soil communities.     

Comparison of solid-phase and eluate assays to gauge the ecotoxicological risk of organic wastes on soil organisms

Development of methodologies to assess the safety of reusing polluted organic wastes in soil is a priority in Europe. In this study, and coupled with chemical analysis, seven organic wastes were subjected to different aquatic and soil bioassays. Tests were carried out with solid-phase waste and three different waste eluates (water, methanol, and dichloromethane).Solid-phase assays were indicated as the most suitable for waste testing not only in terms of relevance for real situations, but also because toxicity in eluates was generally not representative of the chronic effects in solid-phase.No general correlations were found between toxicity and waste pollutant burden, neither in solid-phase nor in eluate assays, showing the inability of chemical methods to predict the ecotoxicological risks of wastes. On the contrary, several physicochemical parameters reflecting the degree of low organic matter stability in wastes were the main contributors to the acute toxicity seen in collembolans and daphnids.     

Determination of PCDDs and PCDFs in different animal feed ingredients

As result of a study to control feedstuff, analyses were carried out to evaluate the contamination caused by PCDDs and PCDFs in different animal feed ingredients. Thirty two samples were selected, including ingredients of animal and mineral origin. For samples of mineral origin, some additives widely employed as binder and anticaking agents, such as bentonite, damoline, kaolin, magnesite, sepiolite and zeolite were selected. And, for ingredients of animal origin, samples of hemoglobin, animal fat, fish oil, fish meal and meat and bone meal were analyzed. The levels ranged from 0.52 to 9.08 pg WHO-TEQ/g fat for samples of animal origin, and from 0.05 to 460.59 pg WHO-TEQ/g for samples of mineral origin. The higher concentrations were observed for the kaolin samples that presented high levels of dioxin contamination.     

Achievement of high rate nitritation with aerobic granular sludge reactors enhanced by sludge recirculation events

A ratio control strategy has been used to demonstrate the feasibility of this automatic control procedure for the achievement of stable full and partial nitritation. The control strategy assured constant ratio between the dissolved oxygen (DO) and the total ammonia nitrogen (TAN) concentrations in the bulk liquid of aerobic granular sludge reactors operating in continuous mode. Three different set-ups with different reactor capacities were used (3, 110, and 150 L). High strength synthetic wastewaters and reject water were tested with similar performance. Achieved nitrogen loading rates ranged between 0.4 and 6.1 kgN·m^-3·d^-1, at temperatures between 20°C and 30°C. Granular sludge and nitritation were stable in the long term continuous operation of the reactors. Suitable stable effluent for Anammox has been obtained using the desired TAN setpoint (i.e. 50% of influent ammonium oxidation). An existing biofilm model developed incorporating the implemented control loops and validated in a previous publication was used to investigate the effects of the ammonium concentration of the influent and the biofilm density on the achievement of full nitritation. The model demonstrated how sludge recirculation events led to a stable and significant increase of the biomass concentration in the reactor, which in turn resulted in the achievement of high nitrogen loading rates, due to the action of the control strategy. The model predicted an enhancement of stable full nitritation at higher ammonium concentrations in the influent. Poor influence of the biofilm density in the achievement of full nitritation was predicted with the model.     

Soil bioassays as tools for sludge compost quality assessment

Composting is a waste management technology that is becoming more widespread as a response to the increasing production of sewage sludge and the pressure for its reuse in soil. In this study, different bioassays (plant germination, earthworm survival, biomass and reproduction, and collembolan survival and reproduction) were assessed for their usefulness in the compost quality assessment.Compost samples, from two different composting plants, were taken along the composting process, which were characterized and submitted to bioassays (plant germination and collembolan and earthworm performance). Results from our study indicate that the noxious effects of some of the compost samples observed in bioassays are related to the low organic matter stability of composts and the enhanced release of decomposition endproducts, with the exception of earthworms, which are favored. Plant germination and collembolan reproduction inhibition was generally associated with uncomposted sludge, while earthworm total biomass and reproduction were enhanced by these materials. On the other hand, earthworm and collembolan survival were unaffected by the degree of composting of the wastes. However, this pattern was clear in one of the composting procedures assessed, but less in the other, where the release of decomposition endproducts was lower due to its higher stability, indicating the sensitivity and usefulness of bioassays for the quality assessment of composts.     

Diet and environment 1.2 million years ago revealed through analysis of dental calculus from Europe’s oldest hominin at Sima del Elefante,Spain

Sima del Elefante, Atapuerca, Spain contains one of the earliest hominin fragments yet known in Europe, dating to 1.2 Ma. Dental calculus from a hominin molar was removed, degraded and analysed to recover entrapped remains. Evidence for plant use at this time is very limited and this study has revealed the earliest direct evidence for foods consumed in the genus Homo. This comprises starchy carbohydrates from two plants, including a species of grass from the Triticeae or Bromideae tribe, meat and plant fibres. All food was eaten raw, and there is no evidence for processing of the starch granules which are intact and undamaged. Additional biographical detail includes fragments of non-edible wood found adjacent to an interproximal groove suggesting oral hygiene activities, while plant fibres may be linked to raw material processing. Environmental evidence comprises spores, insect fragments and conifer pollen grains which are consistent with a forested environment.     

Sources, distribution and behaviour of methyl tert-butyl ether (MTBE) in the Tamar Estuary, UK

Negligible information is currently available concerning levels of the fuel additive methyl tert-butyl ether (MTBE) in European estuaries or coastal environments. MTBE was measured at selected potentially contaminated harbours and marinas, and throughout an axial transect of the Tamar Estuary, UK. Headspace solid-phase microextraction was used in combination with GC-MS for its determination. MTBE was detected in water samples from all stations at concentrations ranging from a few ng/l to a maximum of 194 ng/l (in a semi-enclosed harbour). Elevated levels were generally associated with motor vehicle and boating activities. The Tamar road and rail bridges provided a major input to the lower estuary, downstream of which conservative mixing appeared depressed, probably through volatilisation and possibly through salting-out. The selected analytical system (using a Carboxen/PDMS fiber) proved both rapid and highly sensitive (with a detection limit of 6 ng/l). During method development, salinity was shown to have a major influence in controlling the extraction efficiency and it was found necessary to adjust salinity in all samples (to 75% saturation) prior to extraction. From these tests, we (for the first time) estimated the Setschenow ("salting-out") constant of MTBE to be 0.11 l/mol.     

Metal pollution in Spanish terrestrial ecosystems during the twentieth century

We show here additional biological evidence of the alteration in global biogeochemistry by human activities during the twentieth century. The mineral concentration of herbarium specimens of 24 species of vascular plants and three species of bryophytes collected in North and East regions of Spain have substantially changed throughout the twentieth century. While V, a proxy tracer of oil pollution, exponentially increased in the last decades, other metals such as Cr, Ba, Sr, Al, Fe, Pb, Cd and Ti increased up to 1960-1970 and started to decrease in 1985-1995, when environmental legal regulations started to be effective. Multivariate principal component analysis showed an overall change in plant elemental concentrations throughout the different decades of the century and a clear separation of vascular plants and bryophytes. Likely important consequences for ecosystem structure and functioning and even for human health may be expected from these changes in mineral concentration.     

Improvements in dioxin abatement strategies at a municipal waste management plant in Barcelona

This study presents the results of a dioxin abatement programme undertaken in the municipal waste incineration plant of Montcada i Reixac (Barcelona, Spain) after the replacement of an obsolete air cleaning device by a new flue gas treatment system. A number of sampling campaigns were conducted with the aim of characterising stack gas emission levels of polychlorinated dibenzo-p-dioxins (PCDDs)/polychlorinated dibenzofurans (PCDFs) and to evaluate initial specifications of dioxin stack gas emission values below 0.1 ng I-TEQ/Nm(3). Preliminary results revealed levels between 44 and 111 ng I-TEQ/Nm(3) when the gas-cleaning system consisted only of an old electrostatic precipitator (ESP). Decreased levels around 15 ng I-TEQ/Nm(3) were observed when the semi-dry scrubber began to operate and the ESP was switched off. Again, remarkable dioxin removal was observed after the installation of the fabric filter and levels around 0.3-0.4 ng I-TEQ/Nm(3) were soon achieved. Nevertheless, the limit of 0.1 ng I-TEQ/Nm(3) was reached by additional injection of activated carbon which helped to lower PCDD/PCDF levels to around 0.036 ng I-TEQ/Nm(3). The results also demonstrated a significant change in the dioxin distribution present in combustion-derived materials (stack gas emission, bottom ash and solid waste from gas treatment). The major dioxin fraction was found in gaseous matrices before the flue gas control system was upgraded. After this step, the major dioxin fraction content was observed in solid waste from gas treatment.