Characterization of airborne particles at a high-btu coal-gasification pilot plant

Airborne particles in fugitive emissions have been measured at a slagging fixed-bed coal-gasification pilot plant using lignite. Sampling was conducted during shutdown operations and opening of the gasifier following an aborted startup. Aerosol collected with a Sierra high-volume impactor was subjected to analysis by gas chromatography, mass spectrometry, and scanning electron microscopy; aerosol collected with an Andersen low-volume impactor was subjected to flameless atomic absorption analysis. The data show that the bulk of the trace organic material is associated with small particles: these data are similar to data on ambient air reported in the literature. Particle morphologies resemble those of fly ash from coal combustion, including smooth spheres, vesicular spheres, and crystalline material. Trace element size distributions are bimodal and resemble data for ambient air. Pb-containing particles are generally submicron, while particles containing Al, Fe, and other crustal species are mostly of supermicron size. Aluminum-based aerosol enrichment factors calculated from the lignite composition show that the composition of the aerosol resembles that of the coal, with the exception of modest enrichments of Mg, Na, As, and Pb in the submicron size range. Aerosol enrichment factors based on the earth's crustal composition are somewhat greater than those based on coal composition for several elements, suggesting potential errors in using crustal enrichment data to investigate chemical fractionation during aerosol formation.     

Characterization of airborne trace metal and trace organic species from coal gasification

Fugitive emissions from a slagging fixed-bed coal-gasification pilot plant were analyzed by flameless atomic absorption spectrophotometry, gas chromatography, and mass spectrometry for trace metal and trace organic species. Analysis of the size distributions of airborne particulate matter inside the plant showed an abundance of large metal-containing particles; outdoor distributions in the vicinity of the plant resembled the indoor distributions, suggesting the importance of the gasifier in influencing ambient air quality. This conclusion was further supported by identification of similar organic compounds inside and outside the plant. Trace element enrichment factors based on the earth's crustal composition were greater than those based on the composition of the lignite used in the gasifier, showing the importance of characterizing the proper source material when inverstigating chemical fraction during aerosol formation. Enrichments in the present study were much greater than those found in previous sampling during aborted start-up and cleaning procedures, where normal operating temperatures had not yet been reached. Both studies showed evidence of enrichment factors which decreased with increasing particle size. Although much of the airborne mass was associated with large particles having low respirability, the high concentrations of some metals indoors suggests that further assessment of potential occupational exposures is warranted.     

Environmental Monitoring Of Remedial Dredging At The New Bedford Harbor, Ma, Superfund Site

New Bedford Harbor (NBH), MA, is a Superfund site because of high polychlorinated biphenyl (PCB) concentrations in the sediment. From April 1994 to September 1995, a remedial dredging operation (termed the “Hot Spot”) removed the most contaminated sediments (PCB concentrations greater than 4000μg/g) from the upper harbor. During remediation, a monitoring program assessed the potential environmental impacts to NBH and adjacent Buzzards Bay. The monitoring program was developed with input from federal, state, and local authorities. Site-specific decision criteria were established to assess net PCB transport, water column toxicity, and PCB bioaccumulation in blue and ribbed mussels (Mytilus edulis and Geukensia demissa, respectively). The remediation was completed without exceeding PCB net transport or acute toxicity effects specified in the decision criteria. In addition, PCB bioaccumulation in mussels during this time period was not significantly greater than pre- or post-operational measurements. The results indicated that approximately 14000 cubic yards of highly PCB contaminated sediment were permanently removed with minimal environmental effects. The lessons learned during this operation, as well as previous pilot studies at the site, will be used to make full-scale remedial efforts in NBH more efficient and environmentally protective.     

Electrofishing in boatable rivers: Does sampling design affect bioassessment metrics?

Data were collected from 60 boatable sites using an electrofishing design that permitted comparisons of the effects of designs and distances on fish assemblage metrics. Sites were classified a priori as Run-of-the-River (ROR) or Restricted Flow (RF). Data representing four different design options (i.e., 1000 and 2000 m for both single and paired banks) were extracted from the dataset and analyzed. Friedman tests comparing metric values among the designs detected significant differences for all richness metrics at both types of sites and for catch per unit effort and percent tolerant species at ROR sites. Richness metrics were generally higher for the two 2000-m designs than for the two 1000-m designs. When plotted against cumulative electrofishing distance, the percent change in metrics declined sharply within approximately 1000 m, after which metrics usually varied by less than 10%. These data demonstrate that designs electrofishing 1000 m of shoreline are sufficient for bioassessments on boatable rivers similar to those in this study, regardless of whether the shoreline is along a single bank or distributed equally among paired banks. However, at sites with depths greater than 4 m, it may be advisable to employ nighttime electrofishing or increase day electrofishing designs to 2000 m.The U.S. Governments right to retain a non-exclusive, royalty free licence in and to any copyright is acknowledged.     

Application of a Proposed Generic LLW Waste Package Analysis With Changing Infiltration in a Humid Environment

Corrosion of carbon steel boxes filled with low‐level radioactive waste and buried within a near surface disposal facility in a humid environment was evaluated using an integrated systems approach framework. The time to hydraulic failure from initial burial to development of holes through the wall of a given waste package from pitting corrosion was calculated for four corrosion scenarios under two different corrosion cases. The two corrosion cases chosen were a constant rate of corrosion and a slowing rate of corrosion. Corrosion rates were estimated for carbon steel buried in soil from several historical studies and related to the corrosivity and aeration profile of the soil. The scenarios were chosen to represent a range of possible conditions at current and future U.S. Department of Energy disposal facilities. For each scenario, once the time to hydraulic failure had been estimated, the amount of liquid present in each waste package at the time of failure was calculated as an estimate of leachate available for subsurface transport. The Savannah River E‐Area Engineered Trench was used as a basis for the hypothetical disposal facility. © 2016 Wiley Periodicals, Inc.     

Characterization of River Networks: A GIS Approach and Its Applications

Fluvial geomorphology provides the basis for characterizing complex river networks and evaluating biophysical processes within watersheds. Understanding the spatial organization of morphological features, their influencing processes, and resultant geomorphic diversity in stream networks are important for efficient restoration, river health assessment, and improving our knowledge of the resilience of riverine landscapes. River characterization is a means to determine the biophysical character of river networks but many methods are fraught with pitfalls, such as the use of incorrect variables and limited acknowledgment of the hierarchical organization of rivers. In this paper, a top‐down geographic information system‐based approach for determining the physical typology of river networks is outlined. A suite of multivariate analyses are used to develop a nomenclature for functional process zones (FPZs) — large tracts of the river network with similar hydro‐geomorphological character. Applied to the Little Miami River, Ohio, six distinct FPZs emerged, which had a nonuniform distribution along the river network. Some FPZs repeated downstream; others were rare in terms of total length and number of FPZ segments. The physical structure of the Little Miami River network was analyzed using a series of community metrics. Application of this approach for river monitoring, establishing reference conditions, as well as management of threatened and endangered species and asset trading is highlighted.     

Polylactic Acid (PLA) Biocomposites Filled with Waste Leather Buff (WLB)

A large amount of leather waste is generated from tanning industries and most of which are disposed of landfill or discharged into the natural water bodies without any treatment, causing environmental problems. The aim of this study is to develop eco-biocomposites using waste leather buff (WLB) as filler in Polylactic acid (PLA) matrix to reduce the environmental issues and provide sustainable solution. WLB/PLA composites were prepared by twins-screw micro extruder varying the WLB content from 2% to 30 wt%. These composite were extensively characterise by several techniques. Tensile properties of the composites showed addition of WLB resulted in improvement of tensile property of composite and reduction in percentage crystallinity of PLA matrix observed with increase in WLB content. The effect of WLB on properties of interfacial adhesion and dispersion in WLB/PLA composites were studied by SEM. Wettability of composites was tested by contact angle and water absorption studies. WLB/PLA composite showed increase in water absorption with WLB loading. These WLB/PLA composite could be used to develop low cost eco-friendly product material.