Treatment of oil spill by sorption technique using fatty acid grafted sawdust

Treatment of oil spills remains a challenge to environmental scientists and technologists. Among all the existing techniques used for oil treatment, sorption is a popular technique because it is cheap, simple and effective. Among the various sorbents used, sawdust appears to be the most attractive material in terms of cost, versatility and abundance. In the present work, the efficacy of surface modification of sawdust by fatty acids (oleic acid, stearic acid and decanoic acid) and vegetable oils (castor oil or mustard oil) is demonstrated. Sorption of seawater contaminated with crude oil and also weathered oil was greatly enhanced by the surface modification. The results show that oleic acid grafted sawdust (OGSD) has the best sorption capacity for crude oil as well as weathered oil.     

Dose equivalent commitments from fallout radionuclides in the open waters of the Great Lakes. 1973–1981

The levels of ¹⁴⁴Ce, ¹³⁷Cs, ¹²⁵Sb, and ⁹⁰Sr in the open waters of the Great Lakes were measured over the period 1973–81. The levels were found to be very low. ¹⁴⁴Ce was detected only up to 1975 after which it dropped below the detection limit. The data indicate that the concentrations of the remaining three radionuclides have decreased with time. ⁹⁰Sr and ¹³⁷Cs provide essentially all of the radiological dose from drinking Great Lakes water. The dose equivalant commitments have been calculated from these measurements and found to be well within the Great Lakes Water Quality Agreement's water quality objective for radioactivity.     

A preliminary study on solid waste generation at Har Ki Pauri,Haridwar, around the Ardh-Kumbh period of sacred bathing in the river Ganga in 2004

The amount of solid waste in the vicinity of the river Ganga increased rapidly during the festive days of Ardh-Kumbh. The initial amount of solid waste was 775.0 kg, observed on 30th January 2004 in the Har Ki Pauri area, which increased to 4,550.0 kg on the main bathing day of 4th May 2004, showing nearly a six-fold increase. The total amount of solid waste collected during nine days of observations was 23,865.0 kg. The rate of solid waste generation fell sharply during the following week, after the main bathing day, and was found to be 1,155.0 kg, which is still about 14.90% higher than the initial value.     

Impact of climate change on Indian forests: a dynamic vegetation modeling approach

We make an assessment of the impact of projected climate change on forest ecosystems in India. This assessment is based on climate projections of the Regional Climate Model of the Hadley Centre (HadRM3) and the dynamic global vegetation model IBIS for A2 and B2 scenarios. According to the model projections, 39% of forest grids are likely to undergo vegetation type change under the A2 scenario and 34% under the B2 scenario by the end of this century. However, in many forest dominant states such as Chattisgarh, Karnataka and Andhra Pradesh up to 73%, 67% and 62% of forested grids are projected to undergo change. Net Primary Productivity (NPP) is projected to increase by 68.8% and 51.2% under the A2 and B2 scenarios, respectively, and soil organic carbon (SOC) by 37.5% for A2 and 30.2% for B2 scenario. Based on the dynamic global vegetation modeling, we present a forest vulnerability index for India which is based on the observed datasets of forest density, forest biodiversity as well as model predicted vegetation type shift estimates for forested grids. The vulnerability index suggests that upper Himalayas, northern and central parts of Western Ghats and parts of central India are most vulnerable to projected impacts of climate change, while Northeastern forests are more resilient. Thus our study points to the need for developing and implementing adaptation strategies to reduce vulnerability of forests to projected climate change.     

Modeling the energy content of combustible ship-scrapping waste at Alang-Sosiya, India, using multiple regression analysis

Alang-Sosiya is the largest ship-scrapping yard in the world, established in 1982. Every year an average of 171 ships having a mean weight of 2.10 x 10(6)(+/-7.82 x 10(5)) of light dead weight tonnage (LDT) being scrapped. Apart from scrapped metals, this yard generates a massive amount of combustible solid waste in the form of waste wood, plastic, insulation material, paper, glass wool, thermocol pieces (polyurethane foam material), sponge, oiled rope, cotton waste, rubber, etc. In this study multiple regression analysis was used to develop predictive models for energy content of combustible ship-scrapping solid wastes. The scope of work comprised qualitative and quantitative estimation of solid waste samples and performing a sequential selection procedure for isolating variables. Three regression models were developed to correlate the energy content (net calorific values (LHV)) with variables derived from material composition, proximate and ultimate analyses. The performance of these models for this particular waste complies well with the equations developed by other researchers (Dulong, Steuer, Scheurer-Kestner and Bento's) for estimating energy content of municipal solid waste.     

Emissions from burning biofuels in metal cookstoves

Promoting stoves that burn wood and other biofuels more efficiently is one of the means to reduce fuel consumption, but such efficient stoves may also emit more carbon monoxide and total suspended particulates. In an earlier study, a standard chamber method was proposed to estimate emission factors from burning fuelwood (Acacia nilotica). Here that methodology is extended to measure emission factors from burning of dungcakes and crop residues (Brassica or mustard stalks)—common fuels in many developing countries. The amounts of carbon monoxide (CO) and total suspended particulates (TSP) emitted by four different models of stoves, when using each of the three biofuels, are measured.The CO emission factors range from 13–68 (g/kg) for fuelwood to 26–67 g/kg for dungcakes and 20–114 g/kg for crop residues, for particulates they range from 1.1–3.8 to 4.1–7.8 and 2.1–12.0 g/kg for the three fuels, respectively. On a per unit heat delivered basis, the emissions of CO and TSP from both dungcakes and crop residues are two to three times higher compared to those from fuelwood. While for some improved stove-fuel combinations, the increase in emission factors was offset by the increase in thermal efficiency, this was not always so and causes a dilemma. The more efficient stoves are found to have higher emission factors of both CO and TSP for all three fuels. Emissions per standard task (i.e, on a unit heat delivered basis) is proposed as a criterion to evaluate cookstoves.     

Studies in free amino acids,sugars and organic acids in the leaves of Lasiosiphon eriosephalous

The Science of Nature -     

Soil mycofloral responses following the exposure to 2, 4-D

2, 4-dichlorophenoxyacetic acid (2,4-D) is a post emergence herbicide. The tests were conducted to study the toxicity of 2,4-D using EC50 value in four dilutions. 2,4-D was applied at concentration of 25, 50, 75, 100, 200 and 300 mg l(-1) in the potato Dextrose agar medium. The effect of this herbicide was evaluated as the colony forming unit (CFU). EC50 value for 10(-3) dilution of soil was 138 +/- 5.944 mg l(-1). Soil physico-chemical parameters and mycofloral properties were also evaluated. Qualitatively 10 genera of fungi were observed in untreated soil, whereas 4 genera were found in 2,4-D administered dose.     

Effect of malathion on reproductive system of male rats

The pesticides are one of the most potentially harmful chemicals liberated in the environment in an unplanned manner Malathion is widely used as a potent pesticide in many countries and has been shown to produce some adverse health effects. A study was conducted to asses the effects of malathion on the male reproductive system of wistar rats. The pesticide was administered to rats orally at dose levels of 50, 150 and 250 mg/kg/body wt/day for 60 days. In comparison to the control rats, there was a significant reduction in the weight of testes, epididymis, seminal vesicle and ventral prostate. Testicular and epididymal sperm density were decreased in the animals treated with malathion. Pre and post fertility test showed 80% negative results after treatment Biochemical profile of the testis revealed a significant decline in the contents of sialic acid and glycogen. Whereas a significant increase in the protein content of testis and testicular cholesterol was observed. The activity of testicular enzyme acid phosphatase increased significantly while decreased alkaline phosphatase activity was found. Malathion also suppressed the level of testosterone significantly Results of the present study clearly suggest that malathion induce toxic effects on the male reproductive system of rats.     

Hydrochemical profile for assessing the groundwater quality of Sambhar lake City and its Adjoining area

Quality assessment of water is essential to ensure sustainable safe use of it for drinking, agricultural, and industrial purposes. For the same purpose the study was conducted for the samples of water of Sambhar lake city and its adjoining areas. The standard methods of APHA were used to analysis 15 samples collected from hand pumps and tube wells of the specified area. The analytical results show higher concentration of total dissolved solids, electrical conductivity sodium, nitrate, sulfate, and fluoride, which indicate signs of deterioration but values of pH, calcium, magnesium, total hardness, and carbonate are within permissible limits as per WHO standards. From the Hill-piper trilinear diagram, it is observed that the majority of groundwater from sampling stations are sodium?Cpotassium?Cchloride?Csulfate type water. The values of sodium absorption ratio and electrical conductivity of the groundwater were plotted in the US salinity laboratory diagram for irrigation water. Only the one sample fall in C₃S₁ quality with high salinity hazard and low sodium hazard. Other samples fall in high salinity hazard and high sodium hazard. Chemical analysis of groundwater shows that mean concentration of cation is in order sodium > magnesium > calcium > potassium while for the anion it is chloride > bicarbonate > nitrate > sulfate.