How well does XAD resin extraction recover halogenated disinfection byproducts for comprehensive identification and toxicity testing?

Halogenated disinfection byproducts (DBPs) are an unintended consequence of drinking water disinfection, and can have significant toxicity. XAD resins are commonly used to extract and enrich trace levels of DBPs for comprehensive, nontarget identification of DBPs and also for in vitro toxicity studies. However, XAD resin recoveries for complete classes of halogenated DBPs have not been evaluated, particularly for low, environmentally relevant levels (ng/L to low µg/L). Thus, it is not known whether levels of DBPs or the toxicity of drinking water might be underestimated. In this study, DAX-8/XAD-2 layered resins were evaluated, considering both adsorption and elution from the resins, for extracting 66 DBPs from water. Results demonstrate that among the 7 classes of DBPs investigated, trihalomethanes (THMs), including iodo-THMs, were the most efficiently adsorbed, with recovery of most THMs ranging from 50%-96%, followed by halonitromethanes (40%-90%). The adsorption ability of XAD resins for haloacetonitriles, haloacetamides, and haloacetaldehydes was highly dependent on the individual species. The adsorption capacity of XAD resins for haloacetic acids was lower (5%-48%), even after adjusting to pH 1 before extraction. Recovery efficiency for most DBPs was comparable with their adsorption, as most were eluted effectively from XAD resins by ethyl acetate. DBP polarity and molecular weight were the two most important factors that determine their recovery. Recovery of trichloromethane, iodoacetic acid, chloro- and iodo-acetonitrile, and chloroacetamide were among the lowest, which could lead to underestimation of toxicity, particularly for iodoacetic acid and iodo-acetonitrile, which are highly toxic.     

Ecotoxicology of glyphosate and recent advances in its mitigation by adsorption

Environmental Science and Pollution Research - Glyphosate (N-[phosphonomethyl]glycine) is one of the most popular herbicides now used in agricultural practice. The aim of this paper was to discuss...     

Investigating the chromium status,heavy metal contamination,and ecological risk assessment via tannery waste disposal in sub-Saharan Africa (Kenya and South Africa)

Environmental Science and Pollution Research - To mitigate the negative environmental and public health concerns associated with increased industrial discharges amid the rapid industrial growth,...     

Etiology of fatal thoracic aortic injuries: Secondary data analysis

Objectives: Motor vehicle crashes remain a leading cause of death in the United States (US). Thoracic aortic dissection due to blunt trauma remains a major injury mechanism, and up to 90% of these injuries result in death on the scene. The objective of this study is to understand the modern risk factors and etiology of fatal thoracic aortic injuries in the current US fleet.

Methods: Using a unique, linked, Fatality Analysis Reporting System (FARS) and Multiple Cause of Death (MCOD) database from 2000–2010, 144,169 drivers over 16 years of age who suffered fatal injuries were identified. The merged database provides an unparalleled fidelity for identifying thoracic aortic injuries due to motor vehicle accidents. Thoracic aortic injuries were defined by ICD-10 codes S250. Univariate and multivariate logistic regression models for presence of any thoracic aortic injuries were fitted. Age, gender, BMI weight categories, vehicle class, model year, crash type/direction, severity of crash damage, airbag deployment location, and seatbelt use, fatal injury codes, and location of injury were considered. Odds ratios (OR) and corresponding 95% confidence intervals (95%CI) are calculated.

Results: There were 2953 deaths (2.10%) related to thoracic aortic injuries that met the inclusion criteria. Nearside crashes were associated with an increased odds (OR = 1.42, 1.1-1.83), while rollover crashes (OR =.44,.29-.66) were associated with a reduced odds of fatal thoracic aortic injury. Using backward selection on the full multivariate model, the only significant model effects that remained were vehicle type, crash type, body region, and injury type.

Conclusions: The increased prevalence of fatal thoracic aortic injury in nearside crashes, increasing age, and vehicle type provide some insight into the current US fleet. Important factors, including model year, had significantly lower levels of the injury in univariate analysis, demonstrating the effect of safety improvements in newer model vehicles. Further study of this fatal injury is warranted, including comparisons of those who survive the injury.     

Evaluation of health benefit using BenMAP-CE with an integrated scheme of model and monitor data during Guangzhou Asian Games

Guangzhou is the capital and largest city(land area:7287 km2)of Guangdong province in South China.The air quality in Guangzhou typically worsens in November due to unfavorable meteorological conditions for pollutant dispersion.During the Guangzhou Asian Games in November 2010,the Guangzhou government carried out a number of emission control measures that significantly improved the air quality.In this paper,we estimated the acute health outcome changes related to the air quality improvement during the 2010 Guangzhou Asian Games using a next-generation,fully-integrated assessment system for air quality and health benefits.This advanced system generates air quality data by fusing model and monitoring data instead of using monitoring data alone,which provides more reliable results.The air quality estimates retain the spatial distribution of model results while calibrating the value with observations.The results show that the mean PM_2.5concentration in November 2010 decreased by 3.5μg/m~3 compared to that in 2009 due to the emission control measures.From the analysis,we estimate that the air quality improvement avoided 106 premature deaths,1869 cases of hospital admission,and 20,026 cases of outpatient visits.The overall cost benefit of the improved air quality is estimated to be 165 million CNY,with the avoided premature death contributing 90%of this figure.The research demonstrates that Ben MAP-CE is capable of assessing the health and cost benefits of air pollution control for sound policy making.     

Do phytotoxic allelochemicals remain in ashes after burning Chrysanthemoides monilifera subsp. monilifera (boneseed)?

Australia is facing challenges in controlling Chrysanthemoides monilifera subsp. monilifera(boneseed). However, burning has achieved some success in this regard. We aimed to investigate the comparative phytotoxicity of boneseed dried powder and ashes(burnt at 450℃ and250℃). Phenolic compounds in powder and ashes were measured using Folin–Ciocalteu assay and HPLC. The phytotoxicity of boneseed powder and ash extracts was assessed through germination bioassay on Lactuca sativa and the phytotoxicity of litter and ashes was evaluated using field soil, both in growth chamber. Burning of boneseed reduced total phenolics in ashes of boneseed organs by 99% and 100% both at high and low temperatures. The four phenolic compounds that were detected in boneseed were either absent or at negligible levels in the ashes,with inversely related to temperature. Both boneseed ash extracts and litter ash-mediated soil significantly reduced phytotoxicity displaying increased germination, biometric and biochemical parameters of test species compared with unburnt powder extracts and litter powder-mediated soil respectively, with greater reduction of phytotoxicity found for ashes produced at the lower temperature. Interestingly, the ash extracts and litter ash-mediated soil were found to stimulate some of those parameters of the test species compared to control. There was no excessive reactive oxygen species(ROS) produced in test species exposed to ash extracts compared with unburnt powder extracts. These findings suggest that burning of boneseed is an appropriate method of weed control and that this approach will reduce phytotoxicity of this species on native plants.     

An abelisaurid from the Late Cretaceous of Egypt: implications for theropod biogeography

Recent paleogeographic scenarios postulate the isolation of continental Africa during the Late Cretaceous. The absence of abelisaurid theropods from Upper Cretaceous African strata was offered as support of hypothesized African isolation with the acknowledgement that the paucity of African abelisaurids may be mostly an issue of sampling. Here we report on a shed theropod tooth from the Upper Cretaceous (Maastrichtian, ∼70 Ma) Duwi Formation of Egypt. The tooth was referred to the Malagasy abelisaurid “Megalosaurus” crenatissimus (=Majungasaurus crenatissimus) in 1921. A discriminant function analysis was run to test for morphological congruence between the Egyptian tooth and the dentitions of 24 theropod taxa. The analysis correctly classified 96.6% of the teeth in the sample and assigned the tooth to Majungasaurus. As current paleogeographic reconstructions posit Madagascar had attained its current position relative to Africa before the Late Cretaceous, it is unlikely that the Egyptian tooth actually pertains to Majungasaurus. Nevertheless, its classification as an abelisaurid supports its referral to the clade. This tooth thus constitutes defensible evidence of an abelisaurid from the post-Cenomanian Cretaceous of mainland Africa. Combined with recent discoveries of abelisaurids in Niger and Morocco, the result indicates that Abelisauridae was a diverse group in Africa during the Cretaceous, existing in multiple places for at least ∼25 Ma and weakens support for hypotheses of an isolated Africa during the Late Cretaceous.Electronic Supplementary Material  Supplementary material is available for this article at

---

Comparison of measured total suspended particulate matter concentrations using tapered element oscillating microbalance and a total suspended particulate sampler

A comparison of the concentration of the total suspended particulate (TSP) matter measured by the tapered element oscillating microbalance (TEOM) monitor and the isokinetic TSP samplers developed at the University of Illinois was carried out in several types of confinement livestock buildings. In a majority of the measurements done, the dust concentration measured by the TEOM monitor was lower than the University of Illinois at Urbana-Champaign (UIUC) isokinetic TSP sampler; the TEOM monitor tended to underestimate the total dust concentration by as much as 54%. The difference in measurements can be attributed to the sampling efficiency of the TEOM monitor sampling head and the loss of some semivolatile compounds and particle-bound water because of heating of the TEOM monitor sampling stream to 50 degrees C. Although several articles in the literature supported the latter argument, this study did not investigate the effect of heating the sampling stream or the effect of moisture on the relative difference in dust concentration measurements. The model that best describes the relationship between the two methods was site specific, that is, the linear regression model was applicable only to four of the sites monitored. The measured total dust concentration in livestock buildings range from approximately 300 to 4000 microg/m3; a higher correlation coefficient between TEOM-TSP and UIUC-TSP monitors was obtained in swine facilities than those obtained in a laying facility.     

Design and demonstration of a next-generation air quality attainment assessment system for PM2.5 and O3

Due to the increasingly stringent standards, it is important to assess whether the proposed emission reduction will result in ambient concentrations that meet the standards. The Software for Model Attainment Test—Community Edition(SMAT-CE) is developed for demonstrating attainment of air quality standards of O3 and PM2.5. SMAT-CE improves computational efficiency and provides a number of advanced visualization and analytical functionalities on an integrated GIS platform. SMAT-CE incorporates historical measurements of air quality parameters and simulated air pollutant concentrations under a number of emission inventory scenarios to project the level of compliance to air quality standards in a targeted future year. An application case study of the software based on the U.S. National Ambient Air Quality Standards(NAAQS) shows that SMAT-CE is capable of demonstrating the air quality attainment of annual PM2.5and 8-hour O3 for a proposed emission control policy.     

The effect of financial globalization and natural resource rent on load capacity factor in India: an analysis using the dual adjustment approach

Environmental Science and Pollution Research - Currently, the most crucial economic and ecological issues are related to environmental degradation and sustainability. On this backdrop, this paper...