Evaluation of the National Land Cover Database for Hydrologic Applications in Urban and Suburban Baltimore,Maryland1

Smith, Monica Lipscomb, Weiqi Zhou, Mary Cadenasso, Morgan Grove, and Lawrence E. Band, 2010. Evaluation of the National Land Cover Database for Hydrologic Applications in Urban and Suburban Baltimore, Maryland. Journal of the American Water Resources Association (JAWRA) 46(2):429-442. DOI: 10.1111/j.1752-1688.2009.00412.x Abstract: We compared the National Land Cover Database (NLCD) 2001 land cover, impervious, and canopy data products to land cover data derived from 0.6-m resolution three-band digital imagery and ancillary data. We conducted this comparison at the 1 km², 9 km², and gauged watershed scales within the Baltimore Ecosystem Study to determine the usefulness and limitations of the NLCD in heterogeneous urban to exurban environments for the determination of land-cover information for hydrological applications. Although the NLCD canopy and impervious data are significantly correlated with the high-resolution land-cover dataset, both layers exhibit bias at <10 and >70% cover. The ratio of total impervious area and connected impervious area differs along the range of percent imperviousness – at low percent imperviousness, the NLCD is a better predictor of pavement alone, whereas at higher percent imperviousness, buildings and pavement together more resemble NLCD impervious estimates. The land-cover composition and range for each NLCD urban land category (developed open space, low-intensity, medium-intensity, and high-intensity developed) is more variable in areas of low-intensity development. Fine-vegetation land-cover/lawn area is incorporated in a large number of land use categories with no ability to extract this land cover from the NLCD. These findings reveal that the NLCD may yield important biases in urban, suburban, and exurban hydrologic analyses where land cover is characterized by fine-scale spatial heterogeneity.     

Teleconnections,midlatitude cyclones and Aegean Sea turbulent heat flux variability on daily through decadal time scales

We analyze daily wintertime cyclone variability in the central and eastern Mediterranean during 1958–2001 and identify four distinct “cyclone states,” corresponding to the presence or absence of cyclones in each basin. Each cyclone state is associated with wind flows that induce characteristic patterns of cooling via turbulent (sensible and latent) heat fluxes in the eastern Mediterranean basin and Aegean Sea. The relative frequency of occurrence of each state determines the heat loss from the Aegean Sea during that winter, with largest heat losses occurring when there is a storm in the eastern but not central Mediterranean (eNOTc) and the smallest occurring when there is a storm in the central but not eastern Mediterranean (cNOTe). Time series of daily cyclone states for each winter allow us to infer Aegean Sea cooling for winters prior to 1985, the earliest year for which we have daily heat flux observations. We show that cyclone states conducive to Aegean Sea convection occurred in 1991/1992 and 1992/1993, the winters during which deepwater formation was observed in the Aegean Sea, and also during the mid-1970s and the winters of 1963/1964 and 1968/1969. We find that the eNOTc cyclone state is anticorrelated with the North Atlantic Oscillation (NAO) prior to 1977/1978. After 1977/1978, the cNOTe state is anticorrelated with both the NAO and the North Caspian Pattern, showing that the area of influence of large-scale atmospheric teleconnections on regional cyclone activity shifted from the eastern to the central Mediterranean during the late 1970s. A trend toward more frequent occurrence of the positive phase of the NAO produced less frequent cNOTe states since the late 1970s, increasing the number of days with strong cooling of the Aegean Sea surface waters.     

Polynuclear Aromatic Hydrocarbons Associated with Particulates in Pittsburgh Air

Pittsburgh air was sampled continuously at one site for 886 hrs./sample at 45 cfm with a high volume sampler equipped with a horizontal elutriator as a first stage of separation, and an MSA 1106B glass fiber filter as a final particulate collection stage. The horizontal elutriator was designed to simulate the particulate deposition characteristics of the human respiratory tract. Samples were collected during the period June 1964 to February 1965. Respirable and non-respirable particulate samples were analyzed for polynuclear aromatic hydrocarbon content by a new technique which utilized dual column, flame ionization gas chromatography. It was possible to quantitatively analyze a concentrated benzene extract of the particulate sample for the following individual components: 1, 2 benzanthracene; chrysene; pyrene; 3,4 benzofloranthene; 1, 12 benzoperylene. It was not possible to distinguish between 3,4 benzopyrene, 1,2 benzopyrene and perylene; only the total quantity of these compounds present was detected. This analytical technique is comparable in sensitivity to formerly reported, more time-consuming methods and is very rapid, requiring less than one hour to perform after benzene extraction. Amounts of the above compounds associated with the two particulate fractions collected are reported and discussed.     

Determination and Evaluation of Stack Emissions From Municipal Incinerators

A comprehensive incinerator air pollution control testing program was recently completed in New York City, and the results contain valuable particulate and gas sampling data. The information, which was obtained from a large number of test runs, is especially valuable since there is a shortage of reliable, valid test data of this nature. Since the test data now presented involved 1000 ton/day incinerators, which operate 24 hr/day, 6 days/wk, it is significant design criteria for consideration when upgrading a large incinerator or building a new one. The tests also provide information concerning the nature and concentration of gaseous constituents in the incinerator stack effluent.     

Formaldehyde Concentrations in Wisconsin Mobile Homes

Mobile homes utilize a class of prefabricate construction techniques which rely greatly upon the use of particle board and hardwood plywood paneling for structural components. This has resulted In household sources which may emit formaldehyde into the home, since urea-formaldehyde resins are used as the bonding agent in most pressed wood stocks. A series of 137 mobile home households was investigated to determine indoor formaldehyde exposure concentrations. Homes were selected based on the estimated age of the construction components. Homes were studied serially for a nine-month period, with formaldehyde samples obtained on a monthly basis using a modified NIOSH chromotropic acid procedure. Formaldehyde concentrations were found to range from less than 0.10 ppm to 2.84 ppm. The median exposure concentration was 0.39 ppm. Analysis of variance was performed on each home to discern visit and room measurement effects. Eighty-nine percent of the homes exhibited no measurement placement effects, while only 10 percent failed to demonstrate between-visit variance effects. Regression models were constructed to predict household formaldehyde concentrations. Concentrations exhibited an inverse relationship with the age of the construction materials. A weighted least squares regression model of log of home age predicting temperature-corrected log formaldehyde explained 82 percent of the formaldehyde variation.     

Flow Injection Analysis of MWC Fly Ash Leaching Characteristics

Abstract

A completely mixed batch reactor leaching method utilizing flow injection analysis (the CMBR-FIA method) was developed to study the lead leaching characteristics of municipal waste combustor fly ash. Flow injection analysis (FIA) coupled with atomic absorption spectrophotometry enabled the determination of lead concentrations at one minute intervals. The pH and oxidation-reduction potential of the solution were continuously monitored to characterize the leaching conditions. Automatic titration was used to alter the solution pH to defined endpoints. The CMBR-FIA method offers the ability to immediately observe alterations to the leaching solution, and grants the freedom to study a number of parameters concurrently. The CMBR-FIA method is a rapid and reliable means to investigate leaching characteristics. This paper describes the method and demonstrates its use to monitor the leaching of lead from municipal solid waste combustor fly ash as a function of pH. Soluble lead concentrations are shown to increase quickly with decreasing pH.

A maximum of 50% of the total lead concentration was available in solution at pH 2. This value gradually decreased with time to over 35% of the total.     

The carbon neutral free for all

Businesses offering to make you or your company carbon neutral are proliferating on the Internet. The term carbon neutral is being defined by common usage. There are no standard ways of measuring your carbon emissions and so no standards for becoming carbon neutral. This paper examines eleven websites offering carbon neutrality. It compares online calculators, their results and the costs of offsetting calculated on the strength of those results. It traces two offset projects: one in Kenya, offering voluntary offsets and run by a not-for-profit organisation; one in India striving for UN Clean Development Mechanism status. The projects are traced from the online carbon offset retailer to the actual project on the ground in order to compare the online rhetoric with the time consuming and difficult work of developing community based projects in Third World countries. The paper offers a definition of carbon neutral based on the ways in which the term is being used. It also uncovers a range of issues for further discussion.     

Water movement within the unsaturated zone in four agricultural areas of the United States

Millions of tons of agricultural fertilizer and pesticides are applied annually in the USA. Due to the potential for these chemicals to migrate to groundwater, a study was conducted in 2004 using field data to calculate water budgets, rates of groundwater recharge and times of water travel through the unsaturated zone and to identify factors that influence these phenomena. Precipitation was the only water input at sites in Indiana and Maryland; irrigation accounted for about 80% of total water input at sites in California and Washington. Recharge at the Indiana site (47.5 cm) and at the Maryland site (31.5 cm) were equivalent to 51 and 32%, respectively, of annual precipitation and occurred between growing seasons. Recharge at the California site (42.3 cm) and Washington site (11.9 cm) occurred in response to irrigation events and was about 29 and 13% of total water input, respectively. Average residence time of water in the unsaturated zone, calculated using a piston-flow approach, ranged from less than 1 yr at the Indiana site to more than 8 yr at the Washington site. Results of bromide tracer tests indicate that at three of the four sites, a fraction of the water applied at land surface may have traveled to the water table in less than 1 yr. The timing and intensity of precipitation and irrigation were the dominant factors controlling recharge, suggesting that the time of the year at which chemicals are applied may be important for chemical transport through the unsaturated zone.