The use of sediment analogues to study the uptake of pollutants by chironomid larvae

A technique is described that uses artificial resin beads with known surface properties to investigate the factors influencing the bioaccumulation of pollutants from sediments. One advantage of this technique is that it provides a standard procedure against which it is possible to calibrate natural sediments with their diverse properties. The method has been used on third instar larvae of the midge Chironomus riparius and the results are compared with previous studies on the worm Lumbriculus variegatus. The use of a standard test using resin beads as a substitute for natural sediment allows comparisons to be made between species and substrates. Thus, the bioaccumulation factors for the midge larvae are much smaller than those of the worm and this correlates with the ability of the insect larva to detoxify many pollutants. It is also possible to use the test to identify if ingestion of the sediment increases the bioaccumulation of contaminants and whether this involves the release of pollutants by digestive processes or not.     

Evaluation of reverse phase liquid chromatography/mass spectrometry for estimation of n-octanol/water partition coefficients for organic chemicals

A reverse-phase high pressure liquid chromatography/mass spectrometry (HPLC/MS method was developed for estimating n-octanol/water partition coefficients (K_ow) of anthropogenic molecules in complex chemical mixtures (e.g., complex effluents and solid waste leachates). The average error for an estimated log K_ow was ca. 0.5 and this error was similar for both aliphatic and aromatic compounds. The minimum level of detection using the total ion current profile generally decreased with increasing molecular weight between 100 and 600 daltons. Results obtained demonstrate that the HPLC/MS method is a viable technique for estimating log K_ow's of anthropogenic chemicals in complex environmental samples.     

COMPARISON OF MODELS FOR ESTIMATING FLOOD QUANTILES IN NEW HAMPSHIRE AND VERMONT1

We develop and compare three regression models for estimating flood quantiles at ungaged stream reaches in New Hampshire and Vermont. These models emerge from systematic analysis and validation of relations between flood magnitude and six candidate predictors reflecting basin size, topography, and climate and channel size at 36 gaging stations with record lengths exceeding 20 years. Of the candidate predictors, bank full width is most highly correlated with flood magnitude and the best prediction equation is based on width. Thus channel geometry is closely related to the current hydrologic regime in spite of geologically recent glaciation and apparently non-alluvial bank materials. We also develop models that use information obtainable from maps or GIS. The best of these uses drainage area and drainage-basin elevation as predictors, but it is substantially less precise than the width-based relation. A third relation using only drainage area as a predictor is even less precise but may be useful for some purposes. No other single predictors or combinations yielded useful predictions, although some had been included in previously-established models for the region. Model comparison included examination of residuals generated by regression using one-at-a-time suppression of data points and comparison with precision obtainable with gaging records of varying lengths.     

Developing an empirical model of phytoplankton primary production: a neural network case study

We describe the development of a neural network model for estimating primary production of phytoplankton. Data from an enriched estuary in the eastern United States, Chesapeake Bay, were used to train, validate and test the model. Two error backpropagation multilayer perceptrons were trained: a simpler one (3-5-1) and a more complex one (12-5-1). Both neural networks outperformed conventional empirical models, even though only the latter, which exploits a larger suite of predictive variables, provided truly accurate outputs. The application of this neural network model is thoroughly discussed and the results of a sensitivity analysis are also presented.     

The evolution of large and small-scale structures in Kelvin–Helmholtz instabilities

To better understand the dynamics of Kelvin–Helmholtz instabilities in environmental flows, their evolution is investigated using direct numerical simulations (DNS). Two-dimensional DNS is used to examine the large-scale and small-scale structures of the instability at high Reynolds and Prandtl numbers that represent real environmental flows. The semi-analytical model of Corcos and Sherman (J Fluid Mech 73:241–264, 1976) is used to explain the physics of these simulations prior to saturation of the KH billow, and also provide a computationally efficient prediction of the vortex dynamics of the instability. The DNS results show that the large-scale structure of the billow does not depend on the Reynolds number for sufficiently high Reynolds numbers. The billow structure reveals a less straightforward dependence on the Prandtl number. Predictions of the model of Corcos and Sherman (J Fluid Mech 73:241–264, 1976) improve as Reynolds number and Prandtl number increase. The small-scale structure of the vorticity and density fields vary with both Reynolds and Prandtl numbers. Three-dimensional DNS of KH flows and their transition to turbulence are used to study small length scales. Based on the thickness of the braid, a simple method is introduced to estimate the Batchelor scale, which can be used as a guide for the resolution required for the direct numerical simulation of two and three-dimensional Kelvin–Helmholtz flow fields.     

Blends of (R)-3-hydroxyhexan-2-one and alkan-2-ones identified as potential pheromones produced by three species of cerambycid beetles

We present data indicating that three species of cerambycid beetles (subfamily Cerambycinae) produce the common cerambycine pheromone component (R)-3-hydroxyhexan-2-one as well as an alkan-2-one component, a possible new motif for cerambycid pheromone components. GC/MS analyses of headspace volatiles produced by male beetles indicated that Cyrtophorus verrucosus (Olivier) produced (R)-3-hydroxyhexan-2-one but also nonan-2-one at ~18 % of the hydroxyketone component, whereas Orwellion gibbulum arizonense (Casey) and Parelaphidion aspersum (Haldeman) produced decan-2-one at ~40 and 7 % of the amount of the hydroxyketone, respectively. In field bioassays, adult C. verrucosus were attracted by (R)-3-hydroxyhexan-2-one alone, but attraction was significantly enhanced by nonan-2-one. This effect was lost if the quantity of nonan-2-one exceeded 100 % of the hydroxyketone, suggesting that beetles could discern ratios of the two chemicals and were most strongly attracted to those approximating the blend produced by males. We suggest that nonan-2-one plays a role in the species specificity of the pheromone signal of C. verrucosus, and that decan-2-one plays a similar role in the semiochemical communication of O. g. arizonense and P. aspersum.     

Experimental evidence that workers recognize reproductives through cuticular hydrocarbons in the ant Odontomachus brunneus

Eusociality is characterized by a reproductive division of labor, wherein workers respond to the presence of reproductive individuals by refraining from reproduction themselves and restricting the reproductive efforts of others. Our understanding of how eusociality is maintained therefore depends on characterizing the mechanism by which workers detect the presence of a reproductive. Variations in cuticular hydrocarbons correspond to changes in reproductive ability in ants, and experimental studies are beginning to reveal the function of hydrocarbons as signals. In this study, we compare the cuticular hydrocarbon profiles of dominant and reproductive workers and queens of the ant Odontomachus brunneus with profiles of non-reproductive workers. Using split/reunification tests we document the existence of worker policing in both queenless and queenright colonies; supernumerary reproductives were treated aggressively by nestmates. Finally, we induce aggression and replicate queen-like submissive nestmate responses by supplementing the hydrocarbon profile of workers with (Z)-9-nonacosene, a compound that was significantly more abundant on the cuticles of reproductives. In three bioassays, we compare this manipulation to various control manipulations of the hydrocarbon profile and demonstrate that workers gauge the reproductive activity of nestmates through changes in their cuticular hydrocarbon profiles.     

Turbinaria ornata as an herbivory refuge for associate algae

Habitat associations are an integral part of coral reef community structure. Commonly, one organism lives in such close association within or near another that a spatial refuge occurs, whereby one of the organisms provides protection to the other. This is often the result of defenses of the host deterring an associate organism’s consumers. In Moorea, French Polynesia, the range and abundance of the brown macroalga, Turbinaria ornata, have increased drastically since 1980 such that dense aggregations of this macroalga are a dominant component of the backreef habitat. Turbinaria ornata is both mechanically and chemically defended from herbivores. Other species of macroalgae grow within aggregations of Turbinaria and may benefit from these defenses. This study investigates whether aggregations of Turbinaria create a refuge from herbivory for associate macroalgae. When Turbinaria aggregations were removed experimentally, there was a significant increase in the number of associate algal species. Moreover, an herbivory assay using the palatable local alga Acanthophora spicifera identified herbivory as the mechanism for lower diversity on bommies lacking Turbinaria aggregations. The local increase in algal richness due to the refuge from herbivory afforded by Turbinaria may be an important contribution to macroalgal and community dynamics on reefs in Moorea, French Polynesia.     

Analysis of underlying causes of investigated loss of containment incidents in Dutch Seveso plants using the Storybuilder method

In the Netherlands there are around 400 “Seveso” sites that fall under the Dutch Major Hazards Decree (BRZO) 1999. Between 2006 and 2010 the Dutch Labour Inspectorate's Directorate for Major Hazard Control completed investigations of 118 loss of containment incidents involving hazardous substances from this group. On the basis of investigation reports the incidents were entered in a tailor-made tool called Storybuilder developed for the Dutch Ministry of Social Affairs and Employment for identifying the dominant patterns of technical safety barrier failures, barrier task failures and underlying management causes associated with the resulting loss of control events. The model is a bow-tie structure with six lines of defence, three on either side of the central loss of containment event. In the first line of defence, failures in the safety barriers leading to loss of control events were primarily equipment condition failures, pre start-up and safeguarding failures and process deviations such as pressure and flow failures. These deviations, which should have been recovered while still within the safe envelope of operation, were missed primarily because of inadequate indication signals that the deviations have occurred. Through failures of subsequent lines of defence they are developing into serious incidents. Overall, task failures are principally failures to provide adequate technical safety barriers and failures to operate provided barriers appropriately. Underlying management delivery failures were mainly found in equipment specifications and provisions, procedures and competence. The competence delivery system is especially important for identifying equipment condition, equipment isolation for maintenance, pre-start-up status and process deviations. Human errors associated with operating barriers were identified in fifty per cent of cases, were mostly mistakes and feature primarily in failure to prevent deviations and subsequently recover them. Loss of control associated with loss of containment was primarily due to the containment being bypassed (72% of incidents) and less to material strength failures (28%). Transfer pipework, connections in process plant and relief valves are the most frequent release points and the dominant release material is extremely flammable. It is concluded that the analysis of a large number of incidents in Storybuilder can support the quantification of underlying causes and provide evidence of where the weak points exist in major hazard control in the prevention of major accidents.