改良黏土对重金属离子的吸附特性及防渗性能

为了评价污泥活性炭(SAC)改良黏土作为垃圾卫生填埋场衬垫防渗材料的可行性,该文通过吸附动力学试验、等温吸附平衡试验、柔性壁渗透试验,分别研究了掺量为0%、1%、3%、5%的SAC改良黏土对Cd(Ⅱ)、Cu(Ⅱ)的吸附特性以及渗透性能。试验结果表明,改良黏土对Cd(Ⅱ)或Cu(Ⅱ)的吸附以30 min内的颗粒表面吸附为主,吸附平衡时间分别为120 min或90 min。改良黏土对Cd(Ⅱ)或Cu(Ⅱ)的吸附符合Langmuir等温吸附模式。随SAC掺量由0%增加至5%,在S/L=120 g/L,Cd(Ⅱ)、Cu(Ⅱ)最大吸附量qm分别增加了25%、47%;当固液比增加到200 g/L,Cd(Ⅱ)、Cu(Ⅱ)最大吸附量qm分别增加了32%、48%。水、垃圾渗滤液2种渗透媒介下SAC改良黏土的渗透系数为1.8×10-9～1.2×10-8cm/s,均<1×10-7cm/s的防渗要求。因此,SAC改良黏土可以作为垃圾填埋场的衬垫防渗材料使用,可以有效阻滞渗滤液中重金属离子的迁移。     

Direct capture of carbon dioxide from air via lime-based sorbents

Mitigation and Adaptation Strategies for Global Change - Direct air capture (DAC) is a developing technology for removing carbon dioxide (CO2) from the atmosphere or from low-CO2-containing...     

Simulation of a 100-MW solar-powered thermo-chemical air separation system combined with an oxy-fuel power plant for bio-energy with carbon capture and storage (BECCS)

The combination of concentrated solar power–chemical looping air separation (CSP-CLAS) with an oxy-fuel combustion process for carbon dioxide (CO₂) capture is a novel system to generate electricity from solar power and biomass while being able to store solar power efficiently. In this study, the computer program Advanced System for Process Engineering Plus (ASPEN Plus) was used to develop models to assess the process performance of such a process with manganese (Mn)-based oxygen carriers on alumina (Al₂O₃) support for a location in the region of Seville in Spain, using real solar beam irradiance and electricity demand data. It was shown that the utilisation of olive tree prunings (Olea europaea) as the fuel—an agricultural residue produced locally—results in negative CO₂ emissions (a net removal of CO₂ from the atmosphere). Furthermore, it was found that the process with an annual average electricity output of 18 MW would utilise 2.43% of Andalusia’s olive tree prunings, thereby capturing 260.5 k-tonnes of CO₂, annually. Drawbacks of the system are its relatively high complexity, a significant energy penalty in the CLAS process associated with the steam requirements for the loop-seal fluidisation, and the gas storage requirements. Nevertheless, the utilisation of agricultural residues is highly promising, and given the large quantities produced globally (~?4 billion tonnes/year), it is suggested that other novel processes tailored to these fuels should be investigated, under consideration of a future price on CO₂ emissions, integration potential with a likely electricity grid system, and based on the local conditions and real data.