Concentrations of PCDD/PCDFs in plasma of subjects living in the vicinity of a hazardous waste incinerator: follow-up and modeling validation

In 2007, the concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDFs) were determined in plasma of non-occupationally exposed subjects living near the only hazardous waste incinerator (HWI) in Spain (Constantí, Tarragona County, Catalonia). These data were compared with the levels found in two previous surveys performed in 1998 (baseline) and 2002. The current mean PCDD/PCDF concentration in plasma was 9.36pg I-TEQg(-1) of lipid (range: 1.76-23.44pg I-TEQg(-1) of lipid). It means a significant reduction of the mean PCDD/PCDFs levels in plasma in comparison to the concentrations found in 1998 and 2002 (27.01 and 15.70pg I-TEQg(-1) of lipid, respectively). This important decrease agrees well with the notable reduction in the dietary intake of PCDD/PCDFs recently noted for the population of the same area (210.1pg I-TEQd(-1), 63.8pgWHO-TEQd(-1), and 27.8pgWHO-TEQd(-1), in 1998, 2002 and 2007, respectively). The current data were also used to predict theoretical PCDD/PCDF concentrations in plasma by executing a single-compartment empirically-based pharmacokinetic model on the basis of the daily intake of these pollutants by the local population.     

Patterns of growth and fluctuating asymmetry: the effects of asymmetrical investment in traits with determinate growth

Fluctuating asymmetry (FA, small and random deviations from perfect symmetry in otherwise bilaterally symmetrical traits) is assumed to depend directly on developmental stability (DS). However, since the processes related to DS operate at a microscopic level, the translation of microscopic errors to the macroscopic character asymmetries (i.e. the DS-FA relation) could be mediated by the cost of growth. To investigate the consequences of this hypothesis, I constructed a model with the following assumptions: the degree of development of a trait depends on the amount of resources allocated to growth, which may differ between individuals and between traits; the cost of growth increases with development, and developmental noise causes random asymmetries in biosynthesis in the two sides of the body. The model predicts that FA follows a parabolic trajectory as growth investment levels increase, regardless of DS. However, depending on the range of variation of investment levels, different relationships (positive, negative or flat) between trait size and asymmetry could be expected. This model may also explain why FA is correlated with the degree of stress in some traits but not in others, and why some traits present a higher level of FA than others. The model also suggests that FA measured on growing traits, at a certain size, could be a more reliable indicator of DS than FA measured on fully grown traits. A study analysing FA patterns of developing and fully grown feathers in the house sparrow (Passer domesticus) corroborates that the levels of FA, and the relationship between asymmetry and feather length, depend on the degree of feather development.     

Influence of humic substances on the photolysis of aqueous pesticide residues

The present work investigated the direct and indirect photolysis of pesticide residues (atrazine, imazaquin, iprodione), in aqueous solutions and under UV-visible radiation (280-480nm). Different kinds of humic substances (HS) were added to samples in order to evaluate their behaviour as possible photocatalysts and their effect on the photolysis of pesticides. The fulvic acids were purchased from the International Humic Substances Society, and they were added to samples in concentrations ranging from 1 to 150 mgl(-1). Titanium dioxide was used as the photocatalyst, in concentration ranging from 10 to 150 mgl(-1). Pesticides photolysis were measured by UV-visible absorption spectroscopy and differential pulse polarography with all used pesticides, reaching total degradation after 2h of irradiation, thus indicating a fast direct photolysis. Photocatalysis by TiO(2) could increase the pesticides photolysis rate up to 40%. This effect, however, was not observed for imazaquin photolysis. Again, except for imazaquin, HS presence showed a positive effect in increasing pesticide degradation, but only within specific concentration ranges (below 10mg l(-1) for iprodione and about 30mgl(-1) for atrazine). Above these ranges HS induce a decrease in the pesticides photolysis rate. Spin-trapping measurements by electronic paramagnetic resonance spectroscopy, using the spin-trap DMPO, showed that HS are able to photogenerate hydroxyl radicals, increasing the pesticides molecule degradation. However, the HS also react with the photogenerated hydroxyl radical, influencing the pesticide photolysis, leading to a decrease in the photolysis rate and causing it to be strongly dependent on the nature and concentration of residues in the water to be treated.     

PM sources in a highly industrialised area in the process of implementing PM abatement technology. Quantification and evolution

Principal component analysis (PCA) coupled with a multilinear regression analysis (MLRA) was applied to PM(10) speciation data series (2002-2005) from four sampling sites in a highly industrialised area (ceramic production) in the process of implementing emission abatement technology. Five common factors with similar chemical profiles were identified at all the sites: mineral, regional background (influenced by the industrial estate located on the coast: an oil refinery and a power plant), sea spray, industrial 1 (manufacture and use of glaze components, including frit fusion) and road traffic. The contribution of the regional background differs slightly from site to site. The mineral factor, attributed to the sum of several sources (mainly the ceramic industry, but also with minor contributions from soil resuspension and African dust outbreaks) contributes between 9 and 11 microg m(-3) at all the sites. Source industrial 1 entails an increase in PM(10) levels between 4 and 5 microg m(-3) at the urban sites and 2 microg m(-3) at the suburban background site. However, after 2004, this source contributed less than 2 microg m(-3) at most sites, whereas the remaining sources did not show an upward or downward trend along the study period. This gradual decrease in the contribution of source industrial 1 coincides with the implementation of PM abatement technology in the frit fusion kilns of the area. This relationship enables us to assess the efficiency of the implementation of environmental technologies in terms of their impact on air quality.     

Fungal biofilters for toluene biofiltration: evaluation of the performance with four packing materials under different operating conditions

Packing materials play a key role in the performance of bioreactors for waste gas treatment and particularly in biofilter applications. In this work, the performance of four differently packed biofilters operated in parallel for the treatment of relatively high inlet concentration of toluene was studied. The reactors were compared for determining the suitability of coconut fiber, digested sludge compost from a waste water treatment plant, peat and pine leaves as packing materials for biofiltration of toluene. A deep characterisation of materials was carried out. Biological activity and packing capabilities related to toluene removal were determined throughout 240 days of operation under different conditions of nutrients addition and watering regime. Also, biofilters recovering after a short shutdown was investigated. Nutrient addition resulted in improved removal efficiencies (RE) and elimination capacities (EC) of biofilters reaching maximum ECs between 75 and 95 g m(-3)h(-1) of toluene. In the first 80 days, the pH decreased progressively within the reactors, causing a population change from bacteria to fungi, which were the predominant decontaminant microorganisms thereafter. All reactors were found to recover the RE rapidly after a 5 days shutdown and, in a maximum of 7 days, all reactors had been completely recuperated. These results point out that fungal biofilters are a suitable choice to treat high loads of toluene. In general, coconut fiber and compost biofilters exhibited a better performance in terms of elimination capacity and long-term stability.     

Arsenic speciation of atmospheric particulate matter (PM10) in an industrialised urban site in southwestern Spain

An arsenic speciation study has been performed in PM10 samples collected on a fortnight basis in the city of Huelva (SW Spain) during 2001 and 2002. The arsenic species were extracted from the PM10 filters using a NH2OH x HCl solution and sonication, and determined by HPLC-HG-AFS. The mean bulk As concentration of the samples analyzed during 2001 and 2002 slightly exceed the mean annual 6 ng m(-3) target value proposed by the European Commission for 2013, arsenate [As(V)] being responsible for the high level of arsenic. The speciation analyses showed that As(V) was the main arsenic species found, followed by arsenite [As(III)] (mean 6.5 and 7.8 ng m(-3) for As(V), mean 1.2 and 2.1 ng m(-3) for As(III), in 2001 and 2002, respectively). The high levels of arsenic species found in PM10 in Huelva have a predominant industrial origin, such as the one from a nearby copper smelter, and do not present a seasonal pattern. The highest daily levels of arsenic species correspond to synoptic conditions in which the winds with S and SW components transport the contaminants from the main emission source. The frequent African dust outbreaks over Huelva may result in an increment of mass levels of PM10, but do not represent a significant input of arsenic in comparison to the anthropogenic source. The rural background levels of arsenic around Huelva are rather high, in comparison to other rural or urban areas in Spain, showing a relatively high atmosphere residence time of arsenic. This work shows the importance of arsenic speciation in studies of aerosol chemistry, due to the presence of arsenic species [As(III) and As(V)] with distinct toxicity.     

Mandarin peelings: the best carbon source to produce laccase by static cultures of Trametes pubescens

In the present study, we investigated the effect of different carbon sources (glucose, glycerol and ground mandarin peelings) on laccase production by Trametes pubescens grown on stainless steel sponges under static conditions. The cultures with ground mandarin peelings gave the highest laccase activities, showing values of about 100 U l(-1). This is a very interesting result, since mandarin peelings are common agricultural wastes in some regions such as Mediterranean and Asiatic countries. Therefore, their reutilisation, besides reducing medium cost, also helps to solve the pollution problems caused by their disposal. Also, we studied the effect of supplementing the culture medium with different potential laccase-inducing compounds (ABTS, Tween 20, soya oil, Malaquite Green, Cu(2+), tannic acid) on laccase production. Soya oil was the best inducer of laccase activities, attaining values 4-fold higher than those obtained in the reference cultures.     

Flow cytometry assessment of cytotoxicity and reactive oxygen species generation by single and binary mixtures of cadmium, zinc and copper on populations of the ciliated protozoan Tetrahymena thermophila

In the present study, we have assessed by flow cytometry, the cytotoxicity of the heavy metals Cd, Zn and Cu on populations of the ciliated protozoan Tetrahymena thermophila. The obtained LC(50) for these metals was estimated as 0.195mgCdl(-1), 3.58mgZnl(-1) and 0.47mgCul(-1), respectively. As a result, the toxicity rank for this eukaryotic microorganism is Cd>Cu>Zn. Using the same methodology and the Concentration Addition approach, the toxicity of binary mixtures of these metals was evaluated in order to detect the type of interaction between these metals. Results indicated that antagonism is the predominant interaction but it can change to additivity or even to synergism at high metal concentrations. Besides, the concentration ratio between metals plays also a crucial role in determining the type of metallic interaction, at least in Tetrahymena. Cytotoxicity data from single and bimetallic mixtures have been compared with those from selected microalgae, other species of ciliates, fish and mammalian cell lines and metazoan. By other hand, we have detected the mitochondrial generation of peroxides induced by both single and binary treatments with Cd, Zn and Cu on populations of Tetrahymena, using the specific fluorophore dyhidrorhodamine. The nature and concentrations of metal as well as the metallic ratio were important factors in reactive oxygen species production. All results found in T. thermophila are compared with previous reports in other organisms and, some explanations and hypothesis to support results are given, including the involvement of metallothioneins as antioxidants and their role in the binding of metal cations.     

Cephalopods and cetaceans as indicators of offshore bioavailability of cadmium off Central South Brazil Bight

Regarding Brazilian coast, industrial and urban developments are concentrated along Central South Brazil Bight. Samples from inshore and offshore species from the concerned area were analyzed, comprising 24 cetaceans (9 species) and 32 squids (2 species). Cadmium was determined by GFAAS and our results were in agreement with certified values (DOLT-2, NRCC). Mean cadmium concentration (in microg/g, wet weight) observed in the digestive gland of sexually mature Argentine short-finned squids (Illex argentinus) was 1002.9. To our knowledge this is the highest cadmium level ever reported for a cephalopod. Concerning cetaceans, our results include one of the highest renal cadmium concentrations described for striped dolphins (71.29 microg/g, wet weight). Anthropogenic action, upwelling and cannibalism of Argentine short-finned squid on the studied area are possible reasons for such remarkable cadmium concentrations.