Are current Chinese national ambient air quality standards on 24-hour averages for particulate matter sufficient to protect public health?

With rapid economic development and urbanization in recent decades, China has experienced the worsening of ambient air quality. For better air quality management to protect human health, Chinese government revised national ambient air quality standards(NAAQS) for particulate matter(PM) in 2012(GB3095-2012). To assess the effectiveness of current NAAQS for PM on public health in Chinese population, we conducted a metaanalysis on published studies examining the mortality risk of short-term exposure to PM with aerodynamic diameters less than 10 and 2.5 μm(PM_(10) and PM_(2.5)) in China. The reported24-hour concentrations of PM_(10) and PM_(2.5) in studies ranged from 43.5 to 150.1 μg/m~3 and 37.5 to 176.7 μg/m~3. In the pooled excess, mortality risk estimates of short-term exposure to PM.In specific, per 10 μg/m~3 increase in PM_(10), we observed increases of 0.40%(95%CI: 0.33%,0.47%), 0.57%(95%CI: 0.44%, 0.70%) and 0.49%(95%CI: 0.40%, 0.58%) in total, respiratory and cardiovascular mortality, per 10 μg/m~3 increase in PM_(2.5), we observed increases of 0.51%(95%CI: 0.38%, 0.63%), 0.62%(95%CI: 0.52%, 0.73%) and 0.75%(95%CI: 0.54%, 0.95%) in total,respiratory and cardiovascular mortality. Finally, we derived 125 μg/m~3 for PM_(10) and 62.5 μg/m~3 for PM_(2.5) as 24-hour recommendation values based on the pooled estimates. Our results indicated that current Chinese NAAQS for PM could be sufficient in mitigating the excess mortality risk from short-term exposure to ambient PM. However, future research on longterm exposure cohort studies in Chinese population is also essential in revising annual averages for PM in Chinese NAAQS.     

Characterization particulate matter from several Chinese cooking dishes and implications in health effects

Cooking fume produced by oil and food at a high temperature releases large amount of fine particulate matter(PM) which have a potential hazard to human health. This chamber study investigated particle emission characteristics originated from using four types of oil(soybean oil, olive oil, peanut oil and lard) and different kinds of food materials(meat and vegetable). The corresponding emission factors(EFs) of number, mass, surface area and volume for particles were discussed. Temporal variation of size-fractionated particle concentration showed that olive oil produced the highest number PM concentration for the entire cooking process. Multiple path particle dosimetry(MPPD) model was performed to predict deposition in the human respiratory tract. Results showed that the pulmonary airway deposition fraction was the largest. It was also found that particles produced from olive oil led to the highest deposition. We strongly recommend minimizing the moisture content of ingredients before cooking and giving priority to the use of peanut oil instead of olive oil to reduce human exposure to PM.     

Soot reduction by addition of dimethyl carbonate in normal and inverse ethylene diffusion flames: Nanostructural evidence

Oxygenated fuel represents an attractive alternative as an additive for reducing soot emissions.Dimethyl carbonate(DMC) is an oxygenated compound which is a good option to reduce soot,but the detailed characteristics of soot produced from combustion of hydrocarbon fuels blended with DMC are still lacking. The present research studied the nanostructure and reactivity of soot particles in ethylene/DMC normal and inverse diffusion flames. High resolution transmission electron microscopy(HRTEM), X-ray diffraction(XRD), and thermogravimetric analysis(TGA)were used to analyze the nanostructure and reactivity of soot. It was found that DMC addition was effective in decreasing the average weights of soot formed in flames. The results of HRTEM images showed that soot particles obtained with DMC addition showed liquid-like material and tight bonding, and exhibited more highly disorganized layers, which give it higher reactivity than soot obtained without DMC addition. Furthermore, HRTEM was used to analyze soot fringe characteristics consisting of fringe tortuosity, fringe length, and fringe separation. XRD was used to crosscheck the results for fringe separation, and was consistent with HRTEM results. In addition, the mass loss curve of TGA experiments showed that DMC addition could enhance the reactivity of soot particles.     

施肥对向日葵吸收积累Cd的影响

利用盆栽试验研究了不同施肥处理下(CK、N、NP、NPK) 3种向日葵品种(食用葵、观赏葵、油葵)对北方污染农田土壤镉(Cd)吸收和转运的影响.结果表明,施肥可显著提高观赏葵、油葵生物量及地上部Cd富集量,施NPK肥处理对植物促进效果最为显著.施NPK肥食用葵、观赏葵、油葵地上部Cd富集量分别可达6. 89、8. 92、6. 97 mg·kg~(-1),施肥处理显著提高了向日葵对Cd的富集能力,食用葵、观赏葵、油葵的富集系数(BCF)分别为2. 63(对照)～3. 10(NPK)、2. 80(对照)～4. 02(NPK)、2. 11(对照)～3. 14(NPK).对向日葵叶片亚细胞结构中Cd分布研究发现,将吸收的Cd富集在金属富集颗粒和细胞碎屑中是向日葵耐受Cd胁迫的主要解毒机制.综上所述,向日葵可作为Cd污染土壤的植物修复材料,合理施用NPK肥可明显提高植物对土壤Cd的修复效率.     

Activity maintenance of the excised branches and a case study of NO2 exchange between the atmosphere and P. nigra branches

The efficient maintenance of the activity of excised branches is the powerful guarantee to accurately determine gas exchange flux between the detached branches of tall trees and the atmosphere. In this study, the net photosynthetic rate(NPR) of the excised branches and branches in situ were measured simultaneously by using two photosynthetic instruments to characterize the activity of the excised branches of Phyllostachys nigra. The ratio of normalized NPR of excised branches to NPR in situ was used to assess the photosynthetic activity of detached branches. Based on photosynthetic activity, an optimal hydroponics protocol for maintaining activity of excised P. nigra branches was presented:1/8 times the concentration of Gamborg B5 vitamin mixture with p H = 6. Under the best cultivation protocol, photosynthetic activity of excised P. nigra branches could be maintained more than 90% within 6 hr in the light intensity range of 200–2000 μmol/(m2·sec) and temperature range of 13.4–28.7°C. The nitrogen dioxide(NO2) flux differences between in situ and in vitro branches and the atmosphere were compared using double dynamic chambers.Based on the maintenance method of excised branches, the NO2 exchange flux between the excised P. nigra branches and the atmosphere(from-1.01 to-2.72 nmol/(m2·sec) was basically consistent with between the branches in situ and the atmosphere(from-1.12 to-3.16 nmol/(m2 sec)) within 6 hr. Therefore, this study provided a feasible protocol for in vitro measurement of gas exchange between tall trees and the atmosphere for a period of time.     

Morphology, composition, and sources of individual aerosol particles at a regional background site of the YRD, China

Aerosol samples were collected at Lin'an, a background site of Yangtze River Delta(YRD).Morphology, size, composition, and mixing state of individual aerosol particles were characterized by transmission electron microscopy(TEM) coupled with energy dispersive X-ray spectroscopy(EDS), and the soluble ions of PM_(1.0) were studied by aerosol mass spectrometer(AMS). The daily average AMS mass concentrations of sulfate, nitrate, and ammonium were about 5.8, 8.6, and 5.6 μg/m~3, respectively. Individual aerosol particles were classified into seven types: S-rich, K-rich, organic matter(OM), soot, fly ash, metal, and mineral. S-rich particles were dominant in all size bins, and 51%(by number) of S-rich particles were internally mixed with other particles. The fraction of organic coating particles was 13.7% in morning, 25.2% in afternoon, and 11% in evening, suggesting that the strong photochemical process during afternoon produced more secondary organic aerosols(SOA) on the surface of inorganic particles. Fly ash and metal particles were abundant during the day, suggesting the influence of emissions from coal-fired power plants and steel plants. The results indicate that the intense industrial emissions in the YRD significantly transported to the background areas. PM_(2.5) concentration may be lower in background air than in urban air but complex mixing state of aerosol particles indicates that the long-range transported particles substantially influenced the background air quality.     

2,3,7,8-Tetrachlorodibenzo-p-dioxin promotes migration ability of primary cultured rat astrocytes via aryl hydrocarbon receptor

Emerging evidence showed that 2,3,7,8-Tetrachlorodibenzo-p-dioxin (TCDD) could induce expression of certain reactivation-associated genes in astrocytes, however, the consequent cellular effects and molecular mechanisms are still unclear. During the process of astrocyte reactivation, migration is a critical cellular event. In the present study, we employed wound-healing assay and Transwell® motility assay to explore the effects of TCDD on cell migration in primary cultured rat cortical astrocytes. We found that upon TCDD treatments at relative low concentrations (10^? 10 and/or 10^? 9?mol/L), the ability of primary astrocytes to migrate horizontally and vertically was promoted. In line with this cellular effect, the mRNA expression of two pro-migratory genes, including cell division cycle 42 (CDC42) and matrix metalloproteinase 2 (MMP2) was induced by TCDD treatment. Dioxin exerts its toxic effects mainly through aryl hydrocarbon receptor (AhR) pathway. So the role of AhR pathway in the pro-migratory effects of TCDD was examined using an AhR antagonist, CH223191. We found that application of CH223191 significantly reversed the pro-migratory effects of TCDD. Interestingly, the basal ability of horizontal migration as well as basal levels of CDC42 and MMP2 expression were dramatically reduced suggesting a possible physiological role of AhR in maintaining the endogenous migration ability of the primary astrocytes. These findings support the notion that dioxin promotes astrocyte reactivation at molecular and cellular levels.     

The thermal transformation mechanism of chlorinated paraffins: An experimental and density functional theory study

The increasing production and usage of chlorinated paraffins(CPs) correspondently increase the amount of CPs that experience thermal processes. Our previous study revealed that a significant amount of medium-chain chlorinated paraffins(MCCPs), short-chain chlorinated paraffins(SCCPs) as well as aromatic and chlorinated polycyclic aromatic hydrocarbons(Cl-PAHs) were formed synergistically during the thermal decomposition of CP-52(a class of CP products).However, the transformation mechanisms of CP-52 to these compounds are still not very clear.This article presents a mechanistic analysis on the decomposition of CP-52 experimentally and theoretically. It was found that CP-52 initially undergoes dehydrochlorination and carbon chain cleavage and it transformed into chlorinated and unsaturated hydrocarbons. Cyclization and aromatization were the most accessible pathways at low temperatures(200–400°C), both of which produce mostly aromatic hydrocarbons. As the temperature exceeds 400°C, the hydrocarbons could decompose into small molecules, and the subsequent radical-induced reactions become the predominant pathways, leading to the formation of Cl-PAHs. The decomposition of CP-52 was investigated by using density functional theory and calculations demonstrating the feasibility and rationality of PCB and PCN formation from chlorobenzene. The results improve the understanding of the transformation processes from CP-52 to SCCPs and Cl-PAHs as well as provide data for reducing their emissions during thermal-related processes.     

Performance and mechanism of Cr(VI) removal by zero-valent iron loaded onto expanded graphite

Zero-valent iron (ZVI) was loaded on expanded graphite (EG) to produce a composite material (EG-ZVI) for efficient removal of hexavalent chromium (Cr(VI)). EG and EG-ZVI were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy and Brunauer–Emmett–Teller (BET) analysis. EG-ZVI had a high specific surface area and contained sub-micron sized particles of zero-valent iron. Batch experiments were employed to evaluate the Cr(VI) removal performance. The results showed that the Cr(VI) removal rate was 98.80% for EG-ZVI, which was higher than that for both EG (10.00%) and ZVI (29.80%). Furthermore, the removal rate of Cr(VI) by EG-ZVI showed little dependence on solution pH within a pH range of 1–9. Even at pH 11, a Cr(VI) removal rate of 62.44% was obtained after reaction for 1 hr. EG-ZVI could enhance the removal of Cr(VI) via chemical reduction and physical adsorption, respectively. X-ray photoelectron spectroscopy (XPS) was used to analyze the mechanisms of Cr(VI) removal, which indicated that the ZVI loaded on the surface was oxidized, and the removed Cr(VI) was immobilized via the formation of Cr(III) hydroxide and Cr(III)–Fe(III) hydroxide/oxyhydroxide on the surface of EG-ZVI.     

Effect of preparation methods on the performance of CuFe-SSZ-13 catalysts for selective catalytic reduction of NOx with NH3

CuFe-SSZ-13 catalyst showed excellent performance in the selective catalytic reduction of NO_x with NH₃ (NH₃-SCR) for diesel engine exhaust purification. To investigate the effect of preparation methods on NH₃-SCR performance, Fe was loaded into one-pot synthesized Cu-SSZ-13 catalysts through solid-state ion-exchange (SSIE), homogeneous deposition precipitation (HDP) and liquid ion-exchange (IE), respectively. Three CuFe-SSZ-13 catalysts showed similar SO₂ resistance, which was better than that of Cu-SSZ-13. The improvement was attributed to the protection of Fe species. Hydrothermal stability of three CuFe-SSZ-13 catalysts was significantly different, which was attributed to the state of active species caused by different preparation methods. Compared with the other two catalysts, more active species existed inside the zeolite pores of CuFe-SSZ-13_SSIE. During hydrothermal aging, the aggregation of these active species in the pores caused the collapse of catalyst structure, ultimately leading to the deactivation of CuFe-SSZ-13_SSIE. In contrast, Fe species was dispersed better on the surface over CuFe-SSZ-13_IE, enhancing the hydrothermal stability of catalysts. Consequently, Fe loading effectively improved the resistance of SO₂ and H₂O over Cu-SSZ-13. For CuFe-SSZ-13, large amounts of active species located inside the zeolite pores are not beneficial for the hydrothermal stability.