Land degradation assessment by geo-spatially modeling different soil erodibility equations in a semi-arid catchment

Land degradation by soil erosion is one of the most serious problems and environmental issues in many ecosystems of arid and semi-arid regions. Especially, the disturbed areas have greater soil detachability and transportability capacity. Evaluation of land degradation in terms of soil erodibility, by using geostatistical modeling, is vital to protect and reclaim susceptible areas. Soil erodibility, described as the ability of soils to resist erosion, can be measured either directly under natural or simulated rainfall conditions, or indirectly estimated by empirical regression models. This study compares three empirical equations used to determine the soil erodibility factor of revised universal soil loss equation prediction technology based on their geospatial performances in the semi-arid catchment of the Saraykoy II Irrigation Dam located in Cankiri, Turkey. A total of 311 geo-referenced soil samples were collected with irregular intervals from the top soil layer (0-10?cm). Geostatistical analysis was performed with the point values of each equation to determine its spatial pattern. Results showed that equations that used soil organic matter in combination with the soil particle size better agreed with the variations in land use and topography of the catchment than the one using only the particle size distribution. It is recommended that the equations which dynamically integrate soil intrinsic properties with land use, topography, and its influences on the local microclimates, could be successfully used to geospatially determine sites highly susceptible to water erosion, and therefore, to select the agricultural and bio-engineering control measures needed.     

Modulation of attention and urgent decisions by affect-laden roadside advertisement in risky driving scenarios

In road safety literature the effects of emotional content and salience of advertising billboards have been scarcely investigated. The main aim of this work was to uncover how affect-laden roadside advertisements can affect attention – eye-movements – and subsequent risky decisions – braking – on the Honda Riding Trainer motorcycle simulator. Results indicated that the number of fixations and total fixation time elicited by the negative and positive emotional advertisements were larger than the neutral ones. At the same time, negative pictures got later gaze disengagement than positive and neutral ones. This attentional capture results in less eye fixation times on the road relevant region, where the important driving events happen. Finally, the negative emotional valence advertisements sped up braking on subsequent risky situations. Overall results demonstrated how advertisements with emotional content modulate attention allocation and driving decisions in risky situations and might be helpful for designing roadside advertisements regulations and risk prevention programs.     

The development of probabilistic models to estimate accident risk (due to runway overrun and landing undershoot) applicable to the design and construction of runway safety areas

The risks of landing overrun (LDOR – LanDing OverRun), Take-off Overrun (TOOR – Take-Off OverRun) and landing undershoot (LDUS – LanDing UnderShoot) are dependent on multiple factors related to operating conditions. These include wind, runway surface conditions, landing or take-off distances required, the presence of obstacles, runway distance available, the existence and dimensions of runway safety areas.In this paper we propose risk models for runway overrun and landing undershoot, using a probabilistic approach. These models are supported by historical data on accidents in the area around the runway and will enable us to determine if the risk level is acceptable or whether action must be taken to mitigate such risks at a given airport. Furthermore, these models permit comparison of the results of different risk mitigation actions in terms of operational risk and safety.The principal advantage of this method is the high quality results obtained for a limited investment in terms of time, computing power and data. As such the method is extremely practical and easy to apply in aerodrome planning, development and operation.     

Techno-economical efficiency and productivity change of wastewater treatment plants: the role of internal and external factors

Efficiency and productivity are important measures for identifying best practice in businesses and optimising resource-use. This study analyses how these two measures change across the period 2003-2008 for 196 wastewater treatment plants (WWTPs) in Spain, by using the benchmarking methods of Data Envelopment Analysis and the Malmquist Productivity Index. To identify which variables contribute to the sustainability of the WWTPs, differences in efficiency scores and productivity indices for external factors are also investigated. Our results indicate that both efficiency and productivity decreased over the five years. We verify that the productivity drop is primarily explained by technical change. Furthermore, certain external variables affected WWTP efficiency, including plant size, treatment technology and energy consumption. However, plants with low energy consumption are the only ones which improve their productivity. Finally, the benchmarking analyses proved to be useful as management tools in the wastewater sector, by providing vital information for improving the sustainability of plants.     

Temperature effect of tapered element oscillating microbalance (TEOM) system measuring semi-volatile organic particulate matter

The tapered element oscillating microbalance (TEOM) system is widely used to measure continuous particle mass concentrations in air quality networks. However, the semi-volatile aerosol material is lost under normal operation conditions (50 °C). This study has evaluated the error in the organic fraction of the TEOM-measured secondary organic aerosols formed from the degradation of biogenic pollutants. Experiments were carried out under controlled, water-free conditions in a fully equipped, high volume atmospheric simulator--the European PhotoReactor (EUPHORE). The ozonolysis of α-pinene, β-pinene and limonene provided a reproducible source of organic aerosol. Particulate matter concentration profiles were registered for different TEOM operating temperatures. When these values were compared with values from a filter-based gravimetric method and a scanning mobility particle sizer (SMPS), they showed that the differences between monitoring systems increased with increasing TEOM temperature. According to our results, when the TEOM is operated at 50 °C, it fails to measure 32-46% of the organic particulate material, depending on the aerosol precursor. This study has also identified and quantified the multi-oxygenated organic compounds lost in the TEOM monitoring by using a method based on the gas chromatography-mass spectrometry technique. Important losses have been calculated for relevant ambient aerosol compounds such as pinonic acid, pinonaldehyde, norpinone and limonalic acid. In conclusion, the present study has demonstrated that a high operating temperature of the TEOM monitor reduces the humidity interference but underestimates the semi-volatile organic fraction.     

Okadaic acid induces morphological changes, apoptosis and cell cycle alterations in different human cell types

Okadaic acid (OA) is a marine toxin produced by dinoflagellate species which is frequently accumulated in molluscs usual in the human diet. The exact action mechanism of OA has not been described yet and the results of most reported studies are often conflicting. The aim of this work was to evaluate the OA effects on morphology, cell cycle and apoptosis induction by means of light microscopy and flow cytometry, in three different types of human cells (leukocytes, HepG2 cells and SHSY5Y cells). Cells were treated with a range of OA concentrations in the presence and absence of S9 fraction. OA induced morphological changes in all the cell types studied, and cell cycle disruption only in leukocytes and neuronal cells. SHSY5Y cells were the most sensitive to OA assault. Results obtained in the presence and absence of metabolic activation were similar, suggesting that OA acts both directly and indirectly. Furthermore, OA was found to increase the subG(1) region in the flow cytometry cell cycle analysis, suggesting induction of apoptosis. These results were confirmed by the employment of specific methodologies for studying apoptosis such as caspase 3 activation and annexin V staining. Increases in the apoptosis rate were obtained in all the cells treated in the absence of S9 fraction, accompanied by increases in caspase 3 activation, suggesting that apoptosis induced by OA is a caspase 3-dependent process. Nevertheless, in the presence of S9 fraction no apoptosis was detected, indicating a metabolic detoxifying activity, although necrosis was observed in neuroblastoma cells.     

Characterization of PM10-bound polycyclic aromatic hydrocarbons in the ambient air of Spanish urban and rural areas

Urban areas constitute major pollution sources due to anthropogenic activities located in these areas. Among the legislated air pollutants, the particulate matter with an aerodynamic diameter less than or equal to 10 microns (PM10) and polycyclic aromatic hydrocarbons (PAH) are controlled under Directive 2008/50/EC and Directive 2004/107/EC, respectively due to their adverse health effects. A study was carried out at four urban and rural Spanish areas during the warm and cold seasons in 2008-2009 to quantify 19 PAH associated with the atmospheric PM10 by gas chromatography-mass spectrometry-mass spectrometry detection (GC-MS-MS) with the internal standard method. The particle-bound composition of the analysed PAH was 5 and 10 times greater in industrial and urban areas, respectively when compared to those measured in rural areas. The highest PAH concentrations during the cold period were possibly due to the additional contribution of domestic heating sources and meteorological conditions such as low temperature and solar irradiation. The use of molecular diagnostic ratios indicated that the possible, major PAH pollution sources in the most polluted areas were pyrogenic sources, mainly attributed to petroleum combustion sources (motor vehicle emissions and crude oil combustion). Petrogenic sources related to evaporative emissions also seemed to contribute in the most polluted area during the warm period. Those dates with high carcinogenic character according to the benzo(a)pyrene equivalent (BaP-eq) were also possibly attributed to petroleum combustion sources.     

Assessment of regional metal levels in ambient air by statistical regression models

The assessment of the particulate matter (PM) levels and its constituents presented in the atmosphere is an important requirement of the air quality management and air pollution abatement. The heavy metal levels in PM10 are commonly evaluated by experimental measurements; nevertheless, the EC Directives also allow the Regional Governments to estimate the regulated metal levels (Pb in Directive 2008/50/EC and As, Ni and Cd in Directive 2004/107/EC) by objective estimation and modelling techniques. These techniques are proper alternatives to the experimental determination because the required analysis and/or the number of required sampling sites are reduced. The present work aims to estimate the annual levels of regulated heavy metals by means of multivariate linear regression (MLR) and principal component regression (PCR) at four sites in the Cantabria region (Northern Spain). Since the objective estimation techniques may only be applied when the regulated metal concentrations are below to the lower assessment threshold, a previous evaluation of the determined annual levels of heavy metals is conducted to test the fulfilment of the EC Directives requirements. At the four studied sites, the results show that the objective estimations are allowed alternatives to the experimental determination. The annual average metal concentrations are well estimated by the MLR technique in all the studied sites; furthermore, the EC quality requirements for the objective estimations are fulfilled by the developed statistical MLR models. Hence these estimations may be used by Regional Governments as a proper alternative to the experimental measurements for the regulated metal levels assessment.