环己烷氧化废碱液的回收利用

介绍了一种从环己烷氧化废碱液中回收高价值有机酸的新方法。用氢氧化钠碱熔处理废碱液中的羟基己酸及其聚合物,可使废碱液中己二酸的质量分数由3．18％提高到8．74％,且环境效益和经济效益显著。     

NH3选择性还原NOx催化剂的制备及性能评价

以堇青石蜂窝陶瓷为载体,采用TiO2浆液涂覆载体,再负载活性组分V和W,制备了NH3选择性还原NOx催化剂,研究了TiO2涂层的制备工艺条件,并对催化剂的活性及稳定性进行了评价.实验结果表明,制备TiO2涂层的最佳工艺条件为:TiO2浆液中铝溶胶质量分数12％,浆液pH 1.91,浆液固含量(TiO2与铝溶胶中Al2O...     

炼油催化剂废渣污染及其防治的研究

对炼油厂裂化催化剂废渣和加氢精制催化剂渣的污染成分和污染状况进行了分析,结果表明,排放到大气中的裂化催化剂微粒含有０．５５％的Ｎｉ和０．１８％的Ｖ,已造成大气污染,裂化催化剂废渣经雨水淋洗后,其中部分Ｎｉ和Ｖ会进入水环境,造成污染。     

用废腈纶制备高分子增稠剂

以废腈纶为原料,经碱法水解反应和扩链反应制取乳液用高分子增稠剂。水解工艺条件为水解温度95℃,水解时间4h;水解配方为m(PAN)：m(NaOH)：m(H2O)=1：0．6：5;扩链反应温度95℃,扩链反应时间约4h。对不同乳液体系进行的增稠性能评价及应用表明,利用该技术制备出的高分子增稠剂性能优良,应用范围广泛。现已建成一套生产能力为1000t/a的工业装置。     

黄磷尾气现场脱硫试验

黄磷尾气的主要成分是CO,其中含硫杂质主要以硫化氢的形式存在。测定了黄磷尾气中硫化氢、氧气的含量,分别采用吸收、吸附工艺及其组合工艺对黄磷尾气进行了现场脱硫试验,得出了最佳的黄磷尾气净化脱硫工艺,即吸收、活性炭变温吸附。出口气中H2s的质量浓度为1—5mg/m^3,净化效率达到99．7％。     

混凝—催化氧化法处理丁苯橡胶生产废水

以聚合氯化铝（PAC）、阴离子聚丙烯酰胺（PAM）为混凝剂,以H2O2-O3为氧化剂,采用混凝-催化氧化法处理对丁苯橡胶生产废水。考察了混凝剂种类及其加入量、废水pH对混凝处理效果的影响,氧化剂及其加入量、反应时间和废水pH对COD去除率的影响。实验得出的最佳工艺条件：混凝实验,废水pH为7、PAC和PAM加入量为400mg／L和4mg／L;催化氧化实验,废水pH为7～8、H2O2加入量为200mg／L、H2O2与O3的质量比为0．5。处理后,废水COD从860mg／L降至145mg／L,COD去除率达83．1％,出水水质达到国家二级排放标准。     

四氯化钛精制除钒废弃物的综合利用

对四氯化钛铜丝除钒精制过程中产生的废弃物,采用酸碱联合法回收其中的铜和钒。考察了关键的碱处理及盐酸沉钒过程的影响因素。实验结果为：在碱处理溶液pH12．0—13．0,碱处理温度60℃,碱处理时间1h,沉钒溶液pH1．0～1．5,沉钒温度60℃,沉钒时间1h的条件下,铜和钒的回收率分别达到90％和75％以匕,获得的阴极铜和五氧化二钒的产品质量均达到国家标准。     

Fast firing of tiles containing paper mill sludge, glass cullet and clay

The paper describes results obtained in the development of a previous research. We study here, in fast firing, the sintering behaviour and measure some properties of tiles containing a mixture of 60 wt% of paper mill sludge and 40 wt% of glass cullet. The behaviour of this material is compared to those displayed by materials obtained by the same mixture added with 10, 20 and 30 wt% of a natural red clay. In parallel, the same properties are measured also on a reference blend, which is presently used to produce commercial tiles. We show that powders containing 60 wt% of paper sludge and 40 wt% of glass cullet to which 30 wt% of clay is added give rise to materials that display a stable sintering process and have good hardness and strength and therefore could be used for the industrial production of tiles.     

The general utilization of scrapped PC board

The traditional burning process is used to recover copper from scrapped PC board (printed circuit board) but it causes serious environmental problems. In this research a new process was developed which not only prevents pollution problems, but also maximizes the utility of all the materials on the waste board. First, the scrapped PC board was crushed and grounded, then placed in the NH₃/NH₅CO₃ solution with aeration in order to dissolve copper. After distilling the copper NH₃/NH₅CO₃ solution and then heating the distilled residue of copper carbonate, pure copper oxide was obtained with particle size of about 0.2 μm and the shape elliptical. The remaining solid residue after copper removal was then leached with 6 N hydrochloric acid to remove tin and lead. The last residue was used as a filler in PVC plastics. The PVC plastics with PC board powder as filling material was found to have the same tensile strength as unfilled plastics, but had higher elastic modulus, higher abrasion resistance, and was cheaper.