The effect of continuous exposure of copper on the properties and extracellular polymeric substances (EPS) of bulking activated sludge

Introduction  

This study investigated the effect of copper on chemical oxygen demand (COD) removal efficiency and on the properties (mainly settling and dewatering) and the composition of extracellular polymeric substances (EPS) when 20 mg/L Cu(II) was continuously dosed to a sequencing batch reactor (SBR) inoculated with activated sludge.     

Environmental mutagenicity and toxicity caused by sodium metabisulfite in sea shrimp harvesting in Piauí, Brazil

Sodium metabisulfite is used in marine shrimp harvesting to prevent the occurrence of black spots. Shrimps are soaked in a sodium metabisulfite solution in ice, which is disposed of in sewages that run into marine canals, creating an environmental hazard. This study evaluates the toxicity and mutagenicity caused by sodium metabisulfite in sea waters and sediments collected in a shrimp farm in Cajueiro da Praia (Luis Correia), state of Piauí, Brazil, using the Allium cepa assay. Water and sediment samples were collected in the dry and in the rainy seasons, in three sites: upstream the shrimp farm (Site 1), at the point sodium metabisulfite is discharged (Site 2), and 100 m downstream the farm (Site 3). Three sample dilutions were used (50%, 25% and 10%) for all samples. A negative control (well water) and a positive control (copper sulfate 0.0006 mg mL⁻¹) were used in each experiment. At the end of the 72-h exposure period, onion roots were measured and removed. Mutagenicity analysis included the determination of mitotic index, chromosomal aberrations and the detection of micronuclei; analysis of root size and mitotic index were used as an index of toxicity. The A. cepa assay revealed that the water and sediments samples collected in the Piauí coast contaminated with sodium metabisulfite induce toxicity. The results demonstrate that the assay may be used as a regular tool in the analysis of water parameters in shrimp farms in the coast of Piauí state, and in strategies to preserve the region’s marine ecosystem.     

Genotoxic assessment on river water using different biological systems

This paper reports genotoxicity and toxicity data in water samples collected in Sinos River, an important water course in the hydrographic region of Guaíba Lake, Rio Grande do Sul State, south of Brazil. This river is exposed to intense anthropic influence by numerous shoes, leather, petrochemical, and metallurgy industries. Water samples were collected at two moments (winter 2006 and spring 2006) at five sites of Sinos River and evaluated using in vitro V79 Chinese hamster lung fibroblasts (cytotoxicity, comet assay and micronucleus test) and Allium cepa test (toxicity and micronucleus test). Comet and micronucleus tests revealed that water samples collected exerted cytotoxic, toxic, genotoxic and mutagenic effects. The results showed the toxic action of organic and inorganic agents found in the water samples in all sites of Sinos River, for both data collections. The main causes behind pollution were the domestic and industrial toxic discharges. The V79 and A. cepa tests were proved efficient to detect toxicity and genotoxicity caused by complex mixtures. This study also showed the need for constant monitoring in sites with strong environmental degradation caused by industrial discharges and urban sewages.     

Evaluation of genotoxicity and toxicity of water and sediment samples from a Brazilian stream influenced by tannery industries

This paper reports results of genotoxicity and toxicity studies of water and sediment samples collected from the Estancia Velha stream of southern Brazil, a stream transporting both domestic sewage and effluents from regional factories working in the leather industry. Three sites were selected: in the stream headwaters (Site 1), located downstream of an urban area (Site 2), and near the basin outfall (Site 3). Results obtained with Allium cepa showed no evidence of chromosomal mutation, either in water or in sediment, during winter or summer seasons, but samples collected below Site 1 showed high toxicity. Physical and chemical analyses showed high concentrations of pollutants at these sites. Ecotoxicity tests with Daphnia magna and Ceriodaphnia dubia measured toxicity in water from Sites 2 and 3 in summer 2004. A toxic effect on Hyalella azteca was only found in sediment from Site 3 during winter 2003 and summer 2004. The results suggest that the synergy among different compounds in domestic and industrial sewage discharges can make it difficult to maintain system stability.     

The use of a natural coagulant (Opuntia ficus-indica) in the removal for organic materials of textile effluents

The goal of this study was to investigate the activity of the coagulant extracted from the cactus Opuntia ficus-indica (OFI) in the process of coagulation/flocculation of textile effluents. Preliminary tests of a kaolinite suspension achieved maximum turbidity removal of 95 % using an NaCl extraction solution. Optimization assays were conducted with actual effluents using the response surface methodology (RSM) based on the Box–Behnken experimental design. The responses of the variables FeCl₃, dosage, cactus dosage, and pH in the removal of COD and turbidity from both effluents were investigated. The optimum conditions determined for jeans washing laundry effluent were the following: FeCl₃ 160 mg L^?1, cactus dosage 2.60 mg L^?1, and pH 5.0. For the fabric dyeing effluent, the optimum conditions were the following: FeCl₃ 640 mg L^?1, cactus dosage 160 mg L^?1, and pH 6.0. Investigation of the effects of the storage time and temperature of the cactus O. ficus-indica showed that coagulation efficiency was not significantly affected for storage at room temperature for up to 4 days.     

Enhancement of PAH biomineralization rates by cyclodextrins under Fe(III)-reducing conditions

Amendment of a soil slurry with low concentrations of a cyclodextrin, hydroxypropyl-beta-cyclodextrin (HPCD), (0.05-0.5 g l(-1)) increased the phenanthrene mineralization rate of a microbial consortium by 25% under Fe(III)-reducing conditions. Although a higher concentration (5.0 g l(-1)) resulted in a faster initial rate of mineralization, mineralization ceased after 25 days with maximum mineralization 17% lower than the control (no HPCD). At lower HPCD concentrations, mineralization was still taking place at day 76. Although pH should affect Fe(III) solubility, mineralization rates at pH 6.0 and 8.0 were comparable. Decreasing the temperature reduced the extent and rate of mineralization, but mineralization rates at 10 degrees C were still 60% of that obtained at 30 degrees C.     

The impact of behavioral and physiological maternal effects on offspring sex ratio in the common snapping turtle,<Emphasis Type="Italic"> Chelydra serpentina</Emphasis>

Theory suggests that maternal effects are especially important in organisms with environmentally-sensitive sex-determining mechanisms. However, there is no substantive body of empirical evidence to confirm this conjecture. We integrated field and laboratory studies to jointly evaluate the significance of behavioral (nest-site choice) and physiological (yolk hormone allocation) maternal effects on offspring sex ratio in the common snapping turtle (Chelydra serpentina), a species with temperature-dependent sex determination (TSD). Of the 16 microhabitat variables measured, only three (south, east, and total overstory vegetation cover) were significantly correlated with nest temperature: cooler nests were located under more vegetation cover. In turn, these microhabitat predictors of nest temperature, and nest temperature itself, may influence nest sex ratio: shadier, cooler nests were more likely to produce a higher proportion of male offspring than less shady, warmer nests. Analysis of eggs from these same nests incubated in a common garden design in the laboratory revealed that clutch sex ratio was unaffected by levels of yolk estradiol, yolk testosterone, or their interaction. Examination of both behavioral and physiological maternal effects revealed no concordant impact on offspring sex ratio. However, eggs from nests that produced male-biased sex ratios in the field yielded higher proportions of males under constant-temperature conditions in the laboratory. Our study confirms the importance of behavioral maternal effects in nature on offspring sex ratios in species with TSD, while also revealing the potential presence of a predisposition for sex-ratio production underlying TSD in this system.Communicated by S. Krackow     

Correction to: Characterization of a fatty acid-binding protein from the Pacific oyster (Crassostrea gigas): pharmaceutical and toxicological implications

Environmental Science and Pollution Research - A Correction to this paper has been published: https://doi.org/10.1007/s11356-021-13135-x     

Stability of Aqueous Suspensions of Medium-Chain-Length Poly-3-Hydroxyalkanoate Particles

Although poly-3-hydroxyalkanoates (PHAs) and particularily medium-chain-length (mcl)-PHAs are likely to find industrial applications in a latex form, very few studies have examined their behavior in aqueous suspension and none have examined the dense suspensions required commercially. For this reason, the stability of mcl-PHA latexes containing saturated aliphatic (65 mol% 3-hydroxynonanoate, PHN), and for the first time, with vinyl (PHNU) or carboxylated side chains was examined. At 4 g L^?1 with no stabilizing agent, PHNU nanoparticles (199.4 ± 3.6 nm) were significantly smaller than those of PHN (211.5 ± 6.4 nm) while carboxylated PHN nanoparticles (76.1 ± 6.4 nm) were substantially smaller than those of either PHN or PHNU with particles stable for more than 110 days. Increasing the PHN concentration to 10 g L^?1 also resulted in stable latexes but with larger particles (410.8 ± 5.2 nm). Adjusting the pH of the suspending medium (water) before addition of the polymer (dissolved in acetone) resulted in much smaller PHN particles at pH = 11.3 (134 ± 2 nm) than at pH = 4.3 (312 ± 8 nm) at a 4 g L^?1 final polymer concentration. Zeta potentials of PHN suspensions decreased with pH, likely due to the carboxyl end groups. Above a pH of 4.0, adjusting the pH after particle formation had little effect. NaCl addition could be used to agglomerate and ultimately precipitate the particles. Stabilizers such as surfactants will likely be required to produce denser mcl-PHA latexes with suitable particle size for certain applications such as coatings and toner production.     

Determination of Mark-Houwink Parameters and Absolute Molecular Weight of Medium-Chain-Length Poly(3-Hydroxyalkanoates)

Absolute molecular weight distributions were determined for different medium-chain-length poly(3-hydroxyalkanoates) (MCL PHAs) with predominantly 3-hydroxyoctanoate (PHO), 3-hydroxynonanoate (PHN) or 3-hydroxydodecanoate content. This is the first study to estimate the Mark-Houwink constants of these polymers in the commonly employed GPC carrier solvent tetrahydrofuran (THF). The absolute molecular weight averages were determined via triple-detector size exclusion chromatography and combined with analyses using various detectors. Unlike with the short-chain-length poly(3-hydroxybutyrate), PHB, uncorrected polystyrene calibration in THF provided a good estimate (within 10 %) of absolute MW values for these MCL PHAs, irrespective of side chain length. Weight-average MW values ranged from 172,000 Da for PHO to 18,200 for PHN with 30 mol% 3-hydroxyheptanoate, and dispersities of all samples were close to two. Melt viscosity data suggested an entanglement molecular weight around 8 × 10⁴ Da, significantly higher than most polymers.