Biodegradation of 2,4,6-trichlorophenol in the presence of primary substrate by immobilized pure culture bacteria

In this study, pure strains that are capable of utilizing 2,4,6-trichlorophenol have been isolated from the mixed culture grown on substrates containing chlorophenolic compounds. Studies have been carried out on the capability of these isolated pure strains in suspended and immobilized forms to decompose 2,4,6-trichlorophenol. Additionally, the influence of primary substrates (e.g., phenol, 2-chlorophenol, 3-chlorophenol, 4-chlorophenol, 2,4-dichlorophenol) on the decomposition of 2,4,6-trichlorophenol by the isolated pure strains grown in immobilized form is also investigated. The results are: Through bacterial isolation and identification, three pure strains have been obtained: Pseudomonas spp. strain 01, Pseudomonas spp. strain 02 and Agrobacterium spp. Whether in suspended or immobilized forms, all strains have poor removal efficiencies of 2,4,6-trichlorophenol. However, addition of 200 mg/l phenol will enable the immobilized Pseudomonas spp. strain 01, and Pseudomonas spp. strain 02 to achieve 65% and 48% removal of 2,4,6-trichlorophenol, respectively. Addition of phenol will assist the immobilized Pseudomonas spp. strain 02 in achieving removal of 2,4,6-trichlorophenol but the removal efficiency is not good if the phenol concentration is too low. The optimum phenol concentration should be between 200 and 400 mg/l.     

Semiconductor-assisted photocatalytic degradation of reactive dyes in aqueous solution

This work reports the semiconductor-assisted photochemical degradation of reactive dyes. In an oxygenated-UV-ZnO system almost total decolorization of Remazol Brilliant Blue R, Remazol Black B, Reactive Blue 221 and Reactive Blue 222 was observed in reaction times of about 60 min. Extending the photochemical treatment up to 120 min, mineralization higher than 80% for all the dyes was observed. During the same period, the residual acute toxicity was significantly reduced only for Remazol Black B. A systematic optimization study carried out by factorial design showed that for the reactive dyes tested, the ZnO semiconductor exhibits a better efficiency than that observed with anatase TiO2. A synergistic effect in the coupled TiO2-ZnO system was not observed.     

Steel mill waste application in soil: dynamics of potentially toxic elements in rice and health risk perspectives

Environmental Science and Pollution Research - Potentially toxic elements (PTEs) are of great concern in steel mill wastes. Therefore, in order to use them as potential fertilizers in soil, risk...     

The Cramer’s rule for the parametrization of phenol and its hydroxylated byproducts: UV spectroscopy vs. high performance liquid chromatography

Environmental Science and Pollution Research - A linear algebra theorem like Cramer’s rule was used for the analysis of a system of equations obtained from UV spectroscopy, and results were...     

Physiological responses of beet and cabbage plants exposed to copper and their potential insertion in human food chain

Environmental Science and Pollution Research - Copper (Cu) can be toxic to vegetables when it is absorbed and accumulated at large concentrations, a fact that increases the risk of excessive...     

Bound pesticide residues in soils: a review

This article is a review of the current state of knowledge regarding the formation and biological/environmental significance of bound pesticide residues in soils. We begin by defining various terms used in our discussions and identifying the types/classes of pesticides which may be added to soil and interact with it. We then consider various soil properties and aspects of land management which will influence the nature and degree of the soil-pesticide association and discuss the possible physical and chemical binding mechanisms. We then move on to consider the role of microorganisms and other forms of soil biota in bound residue formation and the bioavailability of soil-borne pesticide residues. The review ends with a consideration of the significance of bound pesticide residues.     

Profile analysis of organic micropollutants in the environment of a coal burning area, NW Greece

The concentrations and profiles of dibenzo-p-dioxins, dibenzofurans, polychlorinated biphenyls and polynuclear aromatic compounds in various environmental matrices are presented in this study. The examined environmental matrices are total suspended particles, fly ash and soil collected in NW Greece, an area characterized by intensive coal burning for electrical power generation. Moreover, the occurrence of organic micropollutants in soot after an accidental fire was examined and the possible impact on the outdoor environment was evaluated. Results were statistically treated to obtain information on representative PCDD/F profiles in each matrix and to compare these profiles with the compositional patterns of possible sources from literature. Coal combustion, fly ash and vehicle exhausts appeared to be the most possible sources in local atmosphere.     

Comparison of different physiological parameter responses in Lemna minor and Scenedesmus obliquus exposed to herbicide flumioxazin

The sensitivity of different physiological parameters in Scenedesmus obliquus and Lemna minor exposed to herbicide (flumioxazin) was investigated to indicate the most convenient and sensitive parameter. To assess toxicity of flumioxazin, we used a panel of biomarkers: pigment contents, chlorophyll fluorescence parameters and antioxidative enzyme activities. Algae and duckweed were exposed to 48-h IC50 for growth rate. In L. minor, the sensitivity of the parameters was as follows: QN > Oxygen emmision > phiS(PSII) > QP > phi(PSII) > CAT, GR > Pigment> APO > Growth. For S. obliquus, this ranking was as follows: CAT > Oxygen emission > QP > APO > GR > Pigment > phiS(PSII) > Growth > phi(PSII) > QN (from the greatest to the least sensitive). The results demonstrated that the observed toxicity is related not only to interspecific variations but also to the selected parameter.     

Decolorizing of lignin wastewater using the photochemical UV/TiO2 process

Studies on applying the photochemical UV/TiO2 oxidation process to treat the lignin-containing wastewater for dissolved organic carbon (DOC), color and reducing A254 (the absorption at the wavelength of 254 nm) have been carried out. The data obtained in this study demonstrate that the UV/TiO2 process is effective in oxidizing the lignin thus reducing the color and DOC of the wastewater treated. The combined UV/TiO2 treatment can achieve better removal of DOC and color than the UV treatment alone. Color removal, based on American Dye Manufacture Index (ADMI) measurement, is greater than 99% if the pH is maintained at 3.0 with the addition of 1 g l(-1) TiO2. When 10 g l(-1) TiO2 is applied, the oxidation reduction potential (ORP) value is reached to result in an 88% removal of both DOC and color. A model was developed based on the variation of ORP during the photochemical reaction to simulate the decoloring process. The proposed model can be used to predict the color removal efficiency of the UV/TiO2 process.     

Electrochemical decolourisation of structurally different dyes

The electrochemical decolourisation of structurally different dyes (bromophenol blue, indigo, poly R-478, phenol red, methyl orange, fuchsin, methyl green and crystal violet) by means of the application of DC electric current was assessed. It was found that the electrochemical process allowed a colour removal of all dyes studied, although the decolourisation rate largely depended on the chemical structure of the different dyes. Nearly complete decolourisation was achieved for bromophenol blue followed by methyl orange and methyl green, whereas phenol red was hardly decolourised (30% in 60 min). In mixtures of two dyes, the decolourisation rate became similar for both dyes. However, the addition of a redox mediator, (Co(2+/3+)) clearly enhanced the degradation rate of all tested dyes, but the simplest dye molecules were attacked firstly, followed by dyes with more complex chemical structures. The results revealed the suitability of the process to effectively decolourise wastewaters from dyeing process.