The design of cyclonic pre-heaters in suspension cement kilns

Cement manufacturing consumes two main types of energy: fuel and electricity. On average, energy costs represent 40% of the total production costs per ton of cement. The challenge is to reduce the consumption of energy to about 3000 MJ/ton clinker without the consumption of massive additional amounts of electricity, which is normally associated with additional fuel-saving measures. This can only be achieved by implementing sound thermal energy optimization measures. Energy-efficient suspension cement kilns are now widely applied and use a cascade of cyclonic pre-heaters of moist particulate feedstock, with heat transfer from hot kiln exhaust gas to particles being a function of heat transfer coefficient, temperature difference and gas–solid contact mode and time. The gas–solid contact mode and time depend on particle movement in cyclones, which has previously been studied by positron emission particle tracking. Heat transfer is governed by Nusselt–Reynolds equations, with gas velocity and properties being a function of the temperature profile along the cascade of cyclones. A stepwise approach of the design thus combines changing hydrodynamics and heat transfer along the successive cyclones, with the overall thermal balance of the cascade as control. This approach leads to major design recommendations, as developed in the present paper.     

Quality control for sampling of PCDD/PCDF emissions from open combustion sources

Both long duration (>6 h) and high temperature (up to 139 °C) sampling efforts were conducted using ambient air sampling methods to determine if either high volume throughput or higher than ambient air sampling temperatures resulted in loss of target polychlorinated dibenzodioxins/dibenzofurans (PCDDs/PCDFs) from a polyurethane foam (PUF) sorbent. Emissions from open burning of simulated military forward operating base waste were sampled using EPA Method TO-9A for 185 min duration using a filter/PUF/PUF in series combination. After a 54 m³ sample was collected, the sampler was removed from the combustion source and the second PUF was replaced with a fresh, clean PUF. An additional 6 h of ambient air sampling (171 m³) was conducted and the second PUF was analyzed to determine if the PCDD/PCDF transferred from the filter and the first PUF. Less than 4.4% of the initial PCDD/PCDF was lost to the second PUF. To assess the potential for blow off of PCDD/PCDF analytes during open air sampling, the mobility of spiked mono- to hepta-PCDD/PCDF standards across a PUF sorbent was evaluated from ambient air temperatures to 145 °C with total volumes between 600 L and 2400 L. Lower molecular weight compounds and higher flow amounts increased release of the spiked standards consistent with vapor pressure values. At 600 L total sampled volume, the release temperature for 1% of the tetra-CDD (the lowest chlorinated homologue with a toxic compound) was 87 °C; increasing the volume fourfold reduced this temperature to 73 °C.     

Concentration of polychlorinated biphenyls and organochlorine pesticides in mullet (Mugil cephalus) and sea bass (Dicentrarchus labrax) from Bizerte Lagoon (Northern Tunisia)

Concentrations of polychlorinated biphenyls (PCBs), and organochlorine pesticides (OCPs) were determined in two fish species, mullet (Mugil cephalus) and sea bass (Dicentrarchus labrax), collected from Bizerte Lagoon and the Mediterranean Sea. In all samples, PCBs were found in higher concentrations than OCPs. The highest concentrations of OCPs and PCBs were found in sea bass, and in Bizerte Lagoon. Concentrations of DDTs and PCBs detected in this study were generally comparable or slightly higher than those found in studies from other Mediterranean and non-Mediterranean regions subject to a high anthropogenic impact. ∑PCBs, ∑HCHs and HCB levels were negatively correlated with lipid content, while no such correlation was seen for ∑DDTs. A significant correlation between levels and length and between levels and weight existed only for ∑PCBs. The daily intake of PCBs and OCPs ingested by people living in Bizerte through the studied fish species was estimated and compared with those observed in other areas.     

Exposure of ruminants to persistent organic pollutants and potential of decontamination

Human activities are emitting persistent organic pollutants (POPs) to the environment. These compounds have raised concerns about the risk of transfer through the food chain via animal products. They are characterized by a strong persistence in environmental matrices and a lipophilicity which may lead to their accumulation in fat tissues. In EU Regulations (no. 1881/2006, 1259/2011), maximum acceptable levels for polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans (PCDD/Fs), and dioxin-like or nondioxin-like polychlorinated biphenyls (PCBs) in food of animal origin have been set. Transfer rates from contaminated fodder to milk have been established: for PCBs, the rate of transfer varies from 5 to 90 % and for PCDD/Fs from 1 to 40 %. The differential transfer of the compounds towards milk is related to the hydrophobicity of the pollutants and to their metabolic susceptibility. According to numerous authors, soil is the major reservoir for POPs, and its involuntary ingestion by farm animals reared outdoors may be the main cause of animal product contamination (meat, milk, or eggs). Recent studies seem to indicate that soil is a real risk matrix in terms of transfer of pollutants to the food chain. A POP crisis management is extremely difficult, since it impacts many farmers located in the contaminated area. The question arising is to know if livestock contaminated by POPs may be decontaminated and further used for their initial purpose. Recent data demonstrate that the decontamination process appear feasible and depends on initial level of contamination or the physiological status of the animals.     

Review on physical and chemical characterizations of contaminated sediments from urban stormwater infiltration basins within the framework of the French observatory for urban hydrology (SOERE URBIS)

Urban stormwater infiltration basins are designed to hold runoff from impervious surfaces and allow the settling of sediments and associated pollutants. However concerns have been expressed about the environmental impacts that may be exerted by the trapped pollutants on groundwater, soils and ecosystems. In this context, sediment characterization represents a key issue for local authorities in terms of management strategies. During the last two decades, several studies were launched including either physical or chemical characterization of stormwater sediments but without real synthesis of data and methods used. Consequently, there is an important need for reviewing the current experimental techniques devoted to the physico-chemical characterization of sediment. The review is based on the outcomes of two experimental sites for which long term monitoring and data collection have been done: the Cheviré basin (near Nantes) and the Django Reinhardt basin (near Lyon). The authors summarize the studies dealing with bulk properties, pollutant contents, their potential mobility and speciation. This paper aims at promoting the significant progresses that were made through a multidisciplinary approach involving multi-scaled and combined experimental techniques.     

Evaluation of an extraction method for a mixture of endocrine disrupters in sediment using chemical and in vitro biological analyses

Aquatic sediments are contaminated by a wide diversity of organic pollutants such as endocrine-disrupting chemicals (EDCs) which encompass a broad range of chemical classes having natural and anthropogenic origins. The use of in vitro bioassays is now widely accepted as an alternative method for their detection in complex samples. However, based on the diversity of EDC chemical properties, their common extraction is difficult and comprehensive validation of extraction methods for a bioanalysis purpose is still weakly documented. In this study, we compared the performance of several organic solvents, i.e., acetone, methanol, dichloromethane, heptane, dichloromethane/acetone (50:50, v/v), dichloromethane/methanol (50:50, v/v), heptane/acetone (50:50, v/v), and heptane/methanol (50:50, v/v), to extract a diversity of active chemicals from a spiked sediment matrix using pressurized liquid extraction. For this purpose, we defined a mixture of 12 EDCs with a wide range of polarity (2?<?log Kow?<?8) (i.e., estrone, 17β-estradiol, bisphenol A, o,p′DDT, 4-tert-octylphenol, fenofibrate, triphenyl phosphate, clotrimazole, PCB-126, 2,3,7,8 TCDD, benzo[k]fluoranthene, and dibenzo[a,h]anthracene). Working concentrations of each individual compound in the mixture were determined as equipotent concentrations on the basis of the concentration-addition (CA) model applied to in vitro estrogenic, dioxin-like, and pregnane X receptor (PXR)-like activities. Extraction efficiencies based on both chemical and biological analyses were assessed in triplicate in artificial blank sediment spiked with this mixture and in natural sediment contaminated by native EDCs. In both spiked and natural sediment, MeOH/DCM yields the best recovery while heptane was the least efficient solvent. Our study provided the validation of a sediment extraction methodology for EDC bioanalysis purposes, which can be used for comprehensive environmental contamination characterization.     

Comparative study of different exposure routes on the biotransformation and genotoxicity of PAHs in the flatfish species, Scophthalmus maximus

In this study, laboratory experiments were carried out in order to come to a better understanding of the fate of polycyclic aromatic hydrocarbons (PAHs) in the marine environment and especially on their bioaccumulation, biotransformation and genotoxic effects in fish. Juveniles of turbot (Scophthalmus maximus) were exposed to PAHs through different routes via (1) a mixture of dissolved PAHs, (2) a PAH-polluted sediment and (3) an oil fuel elutriate. Fish were exposed 4 days followed by a 6-day depuration period. In each experiment, PAH concentrations in the seawater of the tanks were analysed regularly by gas chromatography coupled with mass spectrometry. Muscle and liver samples were also analysed for parent PAH levels and PAH bioconcentration factors were calculated. Biotransformation was evaluated by measuring the levels of PAH metabolites in fish bile. Genotoxicity was assessed by the alkaline comet assay. Regardless of exposure route, the parent PAH concentrations in the liver and muscle showed a peak level 1 day after the beginning of the exposure, followed by a decrease up to the background level towards the end of the experiment, except for the exposure to dissolved PAHs for which levels were relatively low throughout the study. As a consequence, no bioaccumulation was observed in fish tissues at the end of the experiment. In contrast, regardless of exposure routes, a rapid production of biliary metabolites was observed throughout the whole exposure experiment. This was especially true for 1-hydroxypyrene, the major metabolite of pyrene. After 6 days of recovery in clean water, a significant decrease in the total metabolite concentrations occurred in bile. Fish exposed through either route displayed a significant increase in DNA strand breaks after 4 days of exposure, and significant correlations were observed between the level of biliary PAH metabolites and the level of DNA lesions in fish erythrocytes. Overall results indicate that exposure to either a mixture of dissolved PAHs, a PAH-contaminated sediment or a dispersed oil fuel elutriate leads to biotransformation and increase in DNA damage in fish. The quantification of PAH metabolites in bile and DNA damage in erythrocytes appear to be suitable for environmental monitoring of marine pollution either in the case of accidental oil spills or sediment contamination.     

Experimental Evaluation of Waste Tires Utilization in Cement Kilns

ABSTRACT

The present work outlines the main results of a full-scale study conducted on the utilization of waste tires as auxiliary fuel in cement production. Experimental tests were conducted for determining the influence of shredded tires on combustion conditions, emissions produced, and the characteristics of clinker obtained, for feeding ratios over 35% in terms of total heat input. The addition of tire chips did not lead to any appreciable modification in either the whole process or the quality of clinker produced; gaseous emissions were mostly unaffected, with significant improvements related to the reductions obtained in nitrogen and sulfur oxides concentrations. Experimental findings from tests conducted with tire chips exposed to kiln combustion flue gases compare favorably with the typical burnout times derived from theoretical approaches. These experimental data and calculations to estimate particle trajectories beyond the injection point, through proper theoretical analysis of the kinetic behavior, result in important indications for the shredding operation and for optimum injection modes.     

Treatment of phenylmercury salts by heterogeneous photocatalysis over TiO(2)

UV/TiO(2) photocatalysis of phenylmercury salts in aqueous solutions has been performed starting from both acetate (C(6)H(5)HgCH(3)CO(2), PMA) and chloride (C(6)H(5)HgCl, PMC) salts, in the presence or the absence of oxygen at acidic pH. Removal of Hg(II) in solution took place with the simultaneous deposit of dark or pale gray solids on the photocatalyst, identified as metallic Hg (when starting from PMA) or mixtures of Hg(0) and Hg(2)Cl(2) (when starting from PMC). Partial mineralization of the organic part of both compounds has also been achieved. Hg(II) removal and mineralization were enhanced in the absence of oxygen. PMA photocatalysis followed a saturation kinetics, going from first order at low concentration to zero order at higher concentrations (>0.5mM). For PMA, reaction was faster at high pH (11) with formation of mixtures of Hg and HgO. Phenol was detected as a product of the reaction in both cases, PMA and PMC, and no formation of dangerous methyl- or ethylmercury species was observed in the first case. A mechanism for the photocatalytic reaction has been proposed. The fact that calomel was found as a deposit when starting from PMC under nitrogen suggests that the mechanism of Hg(II) transformation proceeds through successive one-electron transfer reactions passing by mercurous forms.