Equity rules for burden sharing in the mitigation process of climate change

Although international negotiation on the mitigation of climate change is a process of determining burden-sharing rules between countries, there has been no clear agreement on equity principles for burden sharing. During the negotiating process up to the Kyoto Protocol, various proposals were made on such burden-sharing rules, but an agreement on emission targets for Annex I countries was achieved without explicitly agree-ing to any rules. In the next phase of the negotiation, debates on emission targets are likely to shift from those between developed countries to those between all parties to the convention. In such a phase, debates on burden-sharing rules will be revisited. The purpose of this paper is: (1) to determine implicitly a formula for the rule for burden sharing between Annex I countries that was considered to be underlying the emission targets of the Kyoto Protocol, and (2) to examine plausible emission targets and timing of commitments for non-Annex I countries in the future by using the result of the analysis on the Kyoto Protocol. A multi-regression method is used for this purpose. It was concluded that the burden sharing between Annex I countries in the Kyoto Protocol can mostly be explained by three variables: the increase in the rate of CO₂ emission during the years 1990 to 2010, the increase in the rate of afforestation between 1990 and 1995, and the GDP per capita at the time of negotiation. The timing of future commitments of developing countries and the levels of targets differ widely, depending on which index or formula is agreed as “equitable”. Some of the developing countries would have to start limiting their emissions within several years if GDP per capita or CO₂ per capita were chosen as the burden-sharing indicator. Developing countries would not have to make commitments until the mid-late 21st century if population growth rate were chosen. If the inferred formula of the Kyoto Protocol were applied to developing countries, they would have had to start mild limitation from 1990.     

亚铵制浆黑液非无菌操作连续发酵生产酵母

从土壤中筛选出能在亚铵黑液中生长的毕赤酵母菌株（Ｐｉｃｈｉａ ｓｐ．Ｎｏ．１）经耐毒驯化后，可接种于酸析脱木素和汽提脱毒后的亚铵黑液中，在非无菌操作条件下连续发酵生产酵母菌体，该菌生产迅速，连续培养衡释率达０．２６ｈ＾－１，总糖的酵母得率为０．４８ｇ／ｇ（ＴＳ），ＣＯＤ去除２３％，菌体易絮凝，可自然沉降分离。     

太原市土壤六六六和滴滴涕的暴露格局及健康风险

为研究六六六(HCHs)和滴滴涕(DDTs)在太原市不同功能区土壤中的暴露格局、来源以及对周围人群的健康风险,在太原市化工区、灌区、矿区、生态区周边荒地土壤中进行采样,分析测定了土壤中HCHs和DDTs含量,根据太原市人群实际情况的暴露参数和USEPA的部分参数,对土壤HCHs和DDTs的健康风险进行评价。结果表明:1)太原市表层土壤中HCHs的平均含量大小依次为化工区>灌区>矿区>生态区;DDTs平均含量的大小依次为化工区>灌区>矿区>生态区,仅6%的HCHs和3%的DDTs和的平均残留水平均高于我国土壤质量标准一级标准,但均不超过二级标准值;2)土壤中HCHs残留主要源于历史上林丹的使用,DDTs残留则来源于历史和新污染源的共同影响;3)太原市表层土壤HCHs和DDTs致癌风险大小为化工园区>矿区>灌区>生态区。非致癌风险大小为化工区>矿区>灌区>生态区。3种暴露途径的在不同功能区的健康风险贡献率大小均为经口摄入>呼吸吸入>皮肤接触;综合来看太原市表层土壤中的HCHs和DDTs并未对人类造成非致癌风险,但有一定的致癌风险。本文的研究结果可为太原市土壤质量评价和环境污染防治提供科学指导,并对太原市人群的健康风险防治提供依据。     

中国典型河湖水体铅的水生生物安全基准与生态风险评价

采用物种敏感度排序法(SSR)对我国铅的淡水水生生物安全基准进行推导,并以太湖为例进行了流域水生生物安全基准推导。对于难以获得的本土生物毒性数据,开展了相应的毒性试验。获得了我国国家与太湖流域铅的水生生物安全基准值,基准最大浓度(CMC)分别为63.92、104.26μg·L-1,基准连续浓度(CCC)分别为1.21、4.06μg·L-1。同时,对我国主要河流以及太湖流域进行了铅的生态风险评价,联合概率曲线法显示影响5%水生生物种类的概率分别为66.22%和43.19%,熵值法则显示中国主要河流存在较大的铅暴露风险,因此,我国铅的潜在生态风险较大,主要河流与太湖流域存在铅污染问题。     

Heavy metals and soil microbes

Heavy metal pollution is a global issue due to health risks associated with metal contamination. Although many metals are essential for life, they can be harmful to man, animal, plant and microorganisms at toxic levels. Occurrence of heavy metals in soil is mainly attributed to natural weathering of metal-rich parent material and anthropogenic activities such as industrial, mining, agricultural activities. Here we review the effect of soil microbes on the biosorption and bioavailability of heavy metals; the mechanisms of heavy metals sequestration by plant and microbes; and the effects of pollution on soil microbial diversity and activities. The major points are: anthropogenic activities constitute the major source of heavy metals in the environment. Soil chemistry is the major determinant of metal solubility, movement and availability in the soil. High levels of heavy metals in living tissues cause severe organ impairment, neurological disorders and eventual death. Elevated levels of heavy metals in soils decrease microbial population, diversity and activities. Nonetheless, certain soil microbes tolerate and use heavy metals in their systems; as such they are used for bioremediation of polluted soils. Soil microbes can be used for remediation of contaminated soils either directly or by making heavy metals bioavailable in the rhizosphere of plants. Such plants can accumulate 100 mg g^?1 Cd and As; 1000 mg g^?1 Co, Cu, Cr, Ni and 10,000 mg g^?1 Pb, Mn and Ni; and translocate metals to harvestable parts. Microbial activity changes soil physical properties such as soil structure and biochemical properties such as pH, soil redox state, soil enzymes that influence the solubility and bioavailability of heavy metals. The concept of ecological dose (ED₅₀) and lethal concentration (LC₅₀) was developed in response to the need to easily quantify the influence of pollutants on microbial-mediated ecological processes in various ecosystems.     

Polyurethane for removal of organic dyes from textile wastewater

Synthetic organic dyes are extensively used in consumer products from textile to pharmaceuticals. A large amount of organic dyes is ultimately discharged as effluent into water bodies, thus posing a serious threat to environment and life. Therefore, removal of dyes from water bodies is needed. To address this problem, various synthetic and natural materials have been used to adsorb dyes. Here, we review the application of polyurethane for removal of organic dyes. First, we review the application of simple and modified polyurethane as efficient and economic adsorbents for dyes. Secondly, we review the polyurethane-based membranes for separation and adsorption of various dyes. Thirdly, we describe polyurethane composites with improved efficiency of dyes removal. Finally, we review the bioremediation of dyes where polyurethane has been proven as an excellent inert support.     

Enhanced degradation of the antibiotic tetracycline by heterogeneous electro-Fenton with pyrite catalysis

There is actually increasing concern about the accumulation of antibiotics, such as tetracycline, in soil and water bodies. There is therefore a need for efficient methods to degrade antibiotics and thus clean waters. Here we tested the degradation of tetracycline using the heterogeneous electro-Fenton-pyrite method and compared the results with the conventional electro-Fenton method. The reaction was performed with a boron-doped diamond or Pt anode and carbon-felt cathode allowing electrogeneration of H₂O₂ from O₂ reduction. Results show an increasing tetracycline mineralization using the following methods: anodic oxidation with electrogenerated H₂O₂, electro-Fenton and then electro-Fenton-pyrite using boron-doped diamond. Ion-exclusion HPLC revealed the complete removal of malic malonic, succinic, acetic, oxalic and oxamic acids. Nitrogen present in tetracycline was mainly mineralized in NH₄ ⁺. The higher efficiency of electro-Fenton-pyrite is explained by self-regulation of soluble Fe²⁺ and pH to 3.0 from pyrite catalyst favoring larger ^·OH generation from Fenton’s reaction.     

H and O isotopic differences in typhon and urban-induced heavy rain in Tokyo

Stable isotope ratios of hydrogen and oxygen of water are useful tracers of the hydrological cycle. For example, isotopes monitor the evapotranspiration in vegetated areas, local snow ice processes and stream water flow processes. δ¹⁸O and δD in rainwater reflect the processes of evaporation, condensation and precipitation. Heavy rains thus modify the stable isotope ratio of ground water, stream water and transpiration water vapor. However, the controlling factors of δ¹⁸O and δD are not clear. Here we analyzed the inorganic ion concentration and stable isotope ratio in 38 normal rainwater and 15 heavy rainwater samples were collected in Shinjuku, Tokyo, Japan, during four years from October 2012 to December 2015. Results show a decrease in δ¹⁸O and δD values with the total rainfall amount, thus highlighting the amount effect. δ¹⁸O and δD volume-weighted mean values in typhoon heavy rain were higher than the values estimated from amount effect, whereas δ¹⁸O and δD volume-weighted mean values in urban-induced heavy rain were lower. Typhoon heavy rain has high Na⁺ ratio and stable isotope ratios, while urban-induced heavy rain has low Na⁺ ratio and stable isotope ratio.     

Nearest neighbor methods for testing reflexivity

Nearest neighbor (NN) methods are widely employed for drawing inferences about spatial point patterns of two or more classes. We introduce a method for testing reflexivity in the NN structure (i.e., NN reflexivity) based on a contingency table which will be called reflexivity contingency table (RCT) henceforth. The RCT is based on the NN relationships among the data points and was used for testing niche specificity in literature, but we demonstrate that it is actually more appropriate for testing the NN reflexivity pattern. We derive the asymptotic distribution of the entries of the RCT under random labeling and introduce tests of reflexivity based on these entries. We also consider Pielou’s approach on RCT and show that it is not appropriate for completely mapped spatial data. We determine the appropriate null hypotheses and the underlying conditions/assumptions required for all tests considered. We investigate the finite sample performance of the tests in terms of empirical size and power by extensive Monte Carlo simulations and illustrate the methods on two real-life ecological data sets.     

Fourth-corner correlation is a score test statistic in a log-linear trait–environment model that is useful in permutation testing

Ecologists wish to understand the role of traits of species in determining where each species occurs in the environment. For this, they wish to detect associations between species traits and environmental variables from three data tables, species count data from sites with associated environmental data and species trait data from data bases. These three tables leave a missing part, the fourth-corner. The fourth-corner correlations between quantitative traits and environmental variables, heuristically proposed 20 years ago, fill this corner. Generalized linear (mixed) models have been proposed more recently as a model-based alternative. This paper shows that the squared fourth-corner correlation times the total count is precisely the score test statistic for testing the linear-by-linear interaction in a Poisson log-linear model that also contains species and sites as main effects. For multiple traits and environmental variables, the score test statistic is proportional to the total inertia of a doubly constrained correspondence analysis. When the count data are over-dispersed compared to the Poisson or when there are other deviations from the model such as unobserved traits or environmental variables that interact with the observed ones, the score test statistic does not have the usual chi-square distribution. For these types of deviations, row- and column-based permutation methods (and their sequential combination) are proposed to control the type I error without undue loss of power (unless no deviation is present), as illustrated in a small simulation study. The issues for valid statistical testing are illustrated using the well-known Dutch Dune Meadow data set.