The Sensitivity of PM25 Source-Receptor Relationships to Atmospheric Chemistry and Transport in a Three-Dimensional Air Quality Model

ABSTRACT

Air quality model simulations constitute an effective approach to developing source-receptor relationships (so-called transfer coefficients in the risk analysis framework) because a significant fraction of particulate matter (particularly PM_2.5) is secondary (i.e., formed in the atmosphere) and, therefore, depends on the atmospheric chemistry of the airshed. In this study, we have used a comprehensive three-dimensional air quality model for PM_{2 5} (SAQM-AERO) to compare three approaches to generating episodic transfer coefficients for several source regions in the Los Angeles Basin. First, transfer coefficients were developed by conducting PM_2.5 SAQM-AERO simulations with reduced emissions of one of four precursors (i.e., primary PM, sulfur dioxide (SO₂), oxides of nitrogen (NO_x), and volatile organic compounds) from each source region. Next, we calculated transfer coefficients using two other methods: (1) a simplified chemistry for PM_2.5 formation, and (2) simplifying assumptions on transport using information limited to basin-wide emission reductions. Transfer coefficients obtained with the simplified chemistry were similar to those obtained with the comprehensive model for VOC emission changes but differed for NO and SO emission changes. The differences were due to the parameterization of the rates of secondary PM formation in the simplified chemistry. In 90% of the cases, transfer coefficients estimated using only basin-wide information were within a factor of two of those obtained with the explicit source-receptor simulations conducted with the comprehensive model. The best agreement was obtained for VOC emission changes; poor agreement was obtained for primary PM_2.5.     

Performance level and efficiency of two differing predator-avoidance strategies depend on nutritional state of the prey fish

Animal prey has developed a variety of behavioural strategies to avoid predation. Many fish species form shoals in the open water or seek refuge in structurally complex habitats. Since anti-predator strategies bear costs and are energy-demanding, we hypothesised that the nutritional state of prey should modify the performance level and efficiency of such strategies. In aquaria either containing or lacking a structured refuge habitat, well-fed or food-deprived juvenile roach (Rutilus rutilus) were exposed to an open-water predator (pikeperch, Sander lucioperca). Controls were run without predators. In the presence of the predator, roach enhanced the performance of the anti-predator strategy and increased the use of the refuge habitat whereby food-deprived roach were encountered more often in the structure than well-fed roach. Nonetheless more starved than well-fed roach were fed upon by the predator. In the treatments offering only open-water areas, roach always formed dense shoals in the presence of the predator. The shoal density, however, was lower in starved roach. Starving fish in shoals experienced the highest predation mortality across all experimental treatments. The experiment confirmed the plasticity of the anti-predator behaviour in roach and demonstrated that food deprivation diminished the efficiency of shoaling more strongly than the efficiency of hiding. The findings may be relevant to spatial distribution of prey and predator–prey interactions under natural conditions because when prey are confronted with phases of reduced resource availability, flexible anti-predator strategies may lead to dynamic habitat use patterns.     

Size removal on polyester fabrics by plasma source ion implantation device

Plasma treatment was evaluated as an alternative clean desizing technology in this work. As indicated by weight loss, O2 plasma treatment efficiently removed sizing agents such as polyvintyl alcohol (PVA), polyacrylic acid esters and their mixture (MIX) on polyethylene terephthalate (PET) fabrics. SEM pictures of the plasma treated samples directly proved the disappearance of the sizing agents. XPS analysis showed apparent changes in chemical composition and functional groups of the PET surface after O2 plasma treatment. Carbon content decreased due to the removal of sizing agents while oxygen content increased. O2 plasma treatment also increased hydrophilic functional groups of sizing agents, which is confirmed by C1s and O1s deconvolution analyses. After O2 plasma treatment, the PET fabric was subjected to conventional desizing process at different temperatures. Except for the PET fabric sized with PVA, plasma-treated fabrics showed more efficient desizing results when compared with untreated fabrics. Furthermore, the desizing effluent from the treated fabric gave lower TOC, COD and BOD values.     

Emission of particulate and gaseous pollutants from household laser processing machine

Indoor air quality (IAQ) directly affects the health of occupants. Household manufacturing equipment (HME) used for hobbies or educational purposes is a new and unexplored source of air pollution. In this study, we evaluated the characteristics of particulate and gaseous pollutants produced by a household laser processing equipment (HLPE). Various target materials were tested using a commercial HLPE under various operating conditions of laser power and sheath air flow rate. The mode diameters of the emitted particles gradually decreased as laser power increased, while the particle number concentration (PNC) and particle emission rate (PER) increased. In addition, as the sheath air flow rate quadrupled from 10 to 40 L/min, the mode diameter of the emitted particles decreased by nearly 25%, but the effect on the PNC was insignificant. When the laser induced the target materials at 53 mW, the mode diameters of particles were <150 nm, and PNCs were >2.0 × 10⁴ particles/cm³. Particularly, analyses of sampled aerosols indicated that harmful substances such as sulfur and barium were present in particles emitted from leather. The carcinogenic gaseous pollutants such as acrylonitrile, acetaldehyde, 1,3-butadiene, benzene, and C₈ aromatics (ethylbenzene) were emitted from all target materials. In an actual indoor environment, the PNC of inhalable ultrafine particles (UFPs) was >5 × 10⁴ particles/cm³ during 30 min of HLPE operation. Our results suggest that more meticulous control methods are needed, including the use of less harmful target materials along with filters or adsorbents that prevent emission of pollutants.     

Heat warnings and avoidance behavior: evidence from a bike-sharing system

Environmental Economics and Policy Studies - Governments throughout the globe usually implement early warning systems to prevent health-related costs from exposure to extreme heat. In a warming...     

Copy number analysis of meiotic and postzygotic mitotic aneuploidies in trophectoderm cells biopsied at the blastocyst stage and arrested embryos

Preimplantation genetic testing for aneuploidy (PGT-A) by copy number analysis is now widely used to select euploid embryos for transfer. Whole or partial chromosome aneuploidy can arise in meiosis, predominantly female meiosis, or in the postzygotic, mitotic divisions during cleavage and blastocyst formation, resulting in chromosome mosaicism. Meiotic aneuploidies are almost always lethal, however, the clinical significance of mitotic aneuploidies detected by PGT-A is not fully understood and healthy live births have been reported following transfer of mosaic embryos. Here, we used single nucleotide polymorphism genotyping of both polar bodies and embryo samples to identify meiotic aneuploidies and compared copy number changes for meiotic and presumed mitotic aneuploidies in trophectoderm cells biopsied at the blastocyst stage and arrested embryos. PGT-A detected corresponding full copy number changes (≥70%) for 36/37 (97%) maternal meiotic aneuploidies. The number of presumed mitotic copy number changes detected exceeded those of meiotic origin. Although mainly in the mosaic range, some of these mitotic aneuploidies had copy number changes ≥70% and would have been identified as full aneuploidies. Interestingly, many arrested embryos had multiple mitotic aneuploidies across a broad range of copy number changes, which may have arisen through tripolar spindle and other mitotic abnormalities.     

The impact of nudging coefficient for the initialization on the atmospheric flow field and the photochemical ozone concentration of Seoul,Korea

In order to incorporate correctly the large or local scale circulation in the model, a nudging term is introduced into the equation of motion. Nudging effects should be included properly in the model to reduce the uncertainties and improve the air flow field. To improve the meteorological components, the nudging coefficient should perform the adequate influence on complex area for the model initialization technique which related to data reliability and error suppression. Several numerical experiments have been undertaken in order to evaluate the effects on air quality modeling by comparing the performance of the meteorological result with variable nudging coefficient experiment. All experiments are calculated by the upper wind conditions (synoptic or asynoptic condition), respectively. Consequently, it is important to examine the model response to nudging effect of wind and mass information. The MM5–CMAQ model was used to assess the ozone differences in each case, during the episode day in Seoul, Korea and we revealed that there were large differences in the ozone concentration for each run.These results suggest that for the appropriate simulation of large or small-scale circulations, nudging considering the synoptic and asynoptic nudging coefficient does have a clear advantage over dynamic initialization, so appropriate limitation of these nudging coefficient values on its upper wind conditions is necessary before making an assessment. The statistical verifications showed that adequate nudging coefficient for both wind and temperature data throughout the model had a consistently positive impact on the atmospheric and air quality field. On the case dominated by large-scale circulation, a large nudging coefficient shows a minor improvement in the atmospheric and air quality field. However, when small-scale convection is present, the large nudging coefficient produces consistent improvement in the atmospheric and air quality field.     

Estimating industrial solid waste and municipal solid waste data at high resolution using economic accounts: an input–output approach with Australian case study

In publicly available waste reports only the totals of waste produced for municipal, or industry waste typically feature. The types of waste generated and the generating industry sector are usually omitted. We propose the direct inputs waste estimation methodology to create a detailed estimate of municipal solid waste and industrial solid waste for an economy (including sectoral and waste type disaggregation) using a top-down estimation methodology that links the aforementioned limited publicly available waste data with an input–output table’s direct inputs (A) matrix. We then provide an application of the direct inputs waste estimation methodology upon the 2008 waste generation of Australia resulting in a 344 industry sector and 14 waste type data set. The resulting estimation gives unique insights into Australian waste generation; including the large C&I tonnages of waste estimated to be produced from the Service sectors such as the Education, Hospitality, and Health sectors as well as the large amount of food waste produced throughout the economy.     

Assessment of the Ecological Integrity of Traunsee (Austria) Via Analysis of Sediments and Benthic Microbial Communities

Since nearly one hundred years Traunsee experiences the import of tons of liquid and solid waste originating from salt and soda production. Today, the lake exhibits chloride concentrations of up to 170 mg L^-1 and 19% of the lake floor are directly or indirectly influenced by industrial deposits (ID). Based on the comparison of several microbial parameters in unaffected, directly affected and intermediate lake bottom sediments, the ecological integrity of the lake was evaluated. The highly alkaline ID, which were exclusively colonized by microorganisms, harbored a bacterial community reduced by a factor of 10 in abundance and biomass compared to undisturbed sediment areas within the lake. The bacterial community of ID was furthermore characterized by a reduced content of actively respiring cells (INT-formazan reduction), a lower frequency of dividing cells (FDC) and a significantly reduced cell and biomass production. A 80 to 90% reduction in carbon recycling is estimated for the area exclusively covered by ID. Protists, although occasionally absent from the industrial sediments, were in general found to be less sensitive to the contaminant stress. Differences in alkalinity and dissolved organic carbon (DOC) concentrations of sediment porewaters as well as the total organic content and C/N ratios of sediments partly explain the microbial pattern observed at the various sampling sites. Possible consequences of the continuous industrial tailings for the whole lake ecosystem and the validation of the ecological integrity are discussed.