A comparative study on per capita waste generation according to a waste collecting system in Korea

As cities are becoming increasingly aware of problems related to conventional mobile collection systems, automated pipeline-based vacuum collection (AVAC) systems have been introduced in some densely populated urban areas. The reasons are that in addition to cost savings, AVAC systems can be efficient, hygienic, and environmentally friendly. Despite difficulties in making direct comparisons of municipal waste between a conventional mobile collection system and an AVAC system, it is meaningful to measure the quantities in each of these collection methods either in total or on a per capita generation of waste (PCGW, g/(day*capita)) basis. Thus, the aim of this study was to assess the difference in per capita generation of household waste according to the different waste collection methods in Korea. Observations on household waste show that there were considerable differences according to waste collection methods. The value of per capita generation of food waste (PCGF) indicates that a person in a city using AVAC produces 60 % of PCGF (109.58 g/(day*capita)), on average, compared with that of a truck system (173.10 g/(day*capita)) as well as 23 %p less moisture component than that with trucks. The value of per capita generation of general waste (PCGG) in a city with an AVAC system showed 147.73 g/(day*capita), which is 20 % less than that with trucks delivered (185 g/(day*capita)). However, general waste sampled from AVAC showed a 35 %p increased moisture content versus truck delivery.     

Radium-226 in cattails, Typha latifolia, and bone of muskrat, Ondatra zibethica (L.), from a watershed with uranium tailings near the city of Elliot Lake, Canada

Radium-226 concentrations were measured in the main food plants (cattails, Typha latifolia) and bone of adult muskrats (Ondatra zibethica (L.)), taken from a study area near Quirke Lake in the Serpent River drainage basin. This watershed receives drainage containing radionuclides from the U tailings near the City of Elliot Lake, Ontario, Canada. Two control sites (one local, one 130 km distant) were also sampled. Radium-226 levels in cattails varied by plant part and place of collection. Roots sampled in the study area had the highest mean (226)Ra level (1135.0 mBq g(-1)), stems and leaves had 284.2 and 275.9 mBq g(-1), respectively (dry-weight basis, n = 6 in all cases). Local and distant control cattails carried much lower (226)Ra levels (20.2 and 15.2 mBq g(-1) dry weight, respectively, using pooled equal portions of all plant parts, n = 3 in both cases). Muskrats from waters with mean total (226)Ra levels in the period, 1984-1987 greater than 75.0 mBq litre(-1) ('study-high' sites), near U tailings within 10 km of Quirke Lake, had a mean (geometric) bone level of (226)Ra of 344.9 mBq g(-1) (dry-weight basis, n = 36); those from nearby waters, containing < 75.0 mBq litre(-1) of (226)Ra ('study-low' sites), had a mean bone level (80.3 mBq g(-1), n = 9) similar to animals taken in unaffected local control areas 20 km from the tailings (79.1 mBq g(-1), n = 12); animals from the distant control area, near Sudbury, Ontario, had the lowest mean burden (11.5 mBq g(-1), n = 24). Levels were unrelated to age or sex of the animals. Dry-weight based (226)Ra concentration ratios (bone concentration/plant tissue concentration) were calculated to range from 0.3-1.4 in the study-high area to 2.4-6.3 in the local control area. Wet-weight based concentration ratios were about 4.3 times higher. Concentration ratios were similar to values calculated for other species and in general agreement with values calculated for humans. The muskrat is judged to be a useful indicator (biomonitor) of environmental (226)Ra levels as there is a highly significant positive correlation coefficient (r = 0.74) between bone and ambient (water) concentrations of the radionuclide (F79 = 95.04, P < 0.0001) Estimated yearly (226)Ra intake by people eating muskrats was calculated to be below the current allowable level set by Canadian regulatory authorities.     

U- and Th-series radionuclides in snowshoe hare (Lepus americanus) taken near U mill tailings close to Elliot Lake, Ontario, Canada

Snowshoe hare (Lepus americanus) trapped near U tailings had higher concentrations of (226)Ra in their bones (250 +/- 94 mBq g(-1) dry wt) than those from local control sites 3-15 km from the tailings (20-30 mBq g(-1) dry wt) and those from a distant control site 880 km away from the U mining area, which were below the detection limit (DL) (3.7 mBq g(-1) dry wt). Most chyme (stomach content) samples contained 226Ra below DL. Concentration ratios of 226Ra from tissues of local plants, considered important in the hare's diet, to bone ranged from 0.22 to 8.60. Concentrations of 210Pb and 210Po (95-245 mBq g(-1) dry wt) were not significantly different among tailings and control site populations. Disequilibrium between these isotopes and their precursors was noted. No significant accumulation of U and Th was noted at any site. Higher concentrations of 228Th compared to 232Th are attributed to accumulation of 228Ra in a manner similar to that of 226Ra. Based on bone 226Ra and 210Po contents, the maximum internal dose rates to the skeleton and the maximum life-time dose of hare living near tailings were 3.9 x 10(-5) Gy d(-1) and 4.2 x 10(-2) Gy, respectively. These rates were below the threshold required to produce osteosarcoma in other mammals and were considered unlikely to adversely affect hare during their lifetime. Radionuclide uptake by the animals was concluded to have no environmental significance in the transport of radionuclides from tailings to other locations.     

Effects of in-situ ozonation on indigenous microorganisms in diesel contaminated soil: survival and regrowth

Soil column experiments were conducted to investigate the effects of chemical oxidation on the survival of indigenous microbes (i.e., heterotrophic microbes, phenanthrene-degrading microbes, and alkane-degrading microbes) for field soil contaminated with diesel fuel. Rapid decreases of total petroleum hydrocarbons (TPH) and aromatics of diesel fuel were observed within the first 60 min of ozone injection; after 60 min, TPH and aromatics decreased asymptotically with ozonation time. The three types of indigenous microbes treated were very sensitive to ozone in the soil column experiment, hence the microbial population decreased exponentially with ozonation time. The numbers of heterotrophic, alkane-degrading, and phenanthrene-degrading bacteria were reduced from 10(8) to 10(4), 10(7) to 10(3), and 10(6) CFU g soil(-1) to below detection limit after 900 min of ozonation, respectively. Except for the soil sample ozonated for 900 min, incubation of ozone-treated soil samples that were not limited by oxygen diffusion showed further removal of TPH. The soil samples that were ozonated for 180 min exhibited the lowest concentration of TPH and the highest regrowth rate of the heterotrophic and alkane-degrading populations after the 9 weeks of incubation.     

Selenium extractability from a contaminated fine soil fraction: implication on soil cleanup

Two batches of fine soil fraction of an acidic soil were deliberately contaminated with selenite (Se(IV)) and selenate (Se(VI)), respectively, and aged for more than 220 days. Speciation analysis using continuous flow-through hydride generation atomic absorption spectrometry (HGAAS) indicated that the species were predominant in their respective aged soils. A selective sequential extraction scheme was employed to fractionate the Se retained in the soils into six fractions of varying retentions. Abilities of various chemical reagents in extracting the Se in the two soil batches were then evaluated. The reagents investigated were sodium salts such as sodium chloride (NaCl), sodium sulfate (Na2SO4), sodium carbonate (Na2CO3), and sodium phosphate (Na3PO4), and two oxidants, namely, hydrogen peroxide (H2O2) and potassium permanganate (KMnO4). It was found that NaCl, Na2SO4, and Na2CO3 could only extract the exchangeable fraction of Se, while Na3PO4 could extract the exchangeable and strongly-bound fractions. Selenate was extracted more than Se(IV) by the salts. The kinetics of Se(IV) extraction by Na3PO4 could be best described by the Elovich model, while the Ritchie second-order model was the most appropriate to describe Se(VI) extraction. Efficiencies of the oxidants in Se(IV) extraction highly depended on their applied dosages. Both H2O2 and KMnO4 were able to extract greater than 93% of total Se, and therefore were significantly more effective than the salts in Se(IV) extraction.     

Bioregeneration of powdered activated carbon in the treatment of alkyl-substituted phenolic compounds in simultaneous adsorption and biodegradation processes

The role of bioregeneration process in renewing the adsorbent surface for further adsorption of organics during simultaneous adsorption and biodegradation processes has been well recognized. The extent of bioregeneration of powdered activated carbon (PAC) as an adsorbent loaded with phenol, p-methylphenol, p-ethylphenol and p-isopropylphenol, respectively, in the simultaneous adsorption and biodegradation processes were quantitatively determined using oxygen uptake as a measure of substrate consumption. Bioregeneration phenomenon was also evaluated in the simultaneous adsorption and biodegradation processes under sequencing batch reactor (SBR) operation to treat synthetic wastewater containing 1200 mg l(-1) phenol and p-methylphenol, respectively. The SBR systems were operated with FILL, REACT, SETTLE, DRAW and IDLE periods in the ratio of 4:6:1:0.75:0.25 for a cycle time of 12 h. The results show that the percentage of desorption from loaded PAC decreased in the order phenol>p-methylphenol>p-ethylphenol>p-isopropylphenol. For the treatment of phenol and p-methylphenol in the SBR reactors, respectively, the simultaneous adsorption and biodegradation processes were able to produce a consistent effluent quality of COD < or = 100 mg l(-1) when the applied PAC dosage was 0.115 and 0.143 g PAC per cycle, respectively. When no further PAC was added, the treatment performance deteriorated to that of the case without PAC addition after 68 and 48 cycles of SBR operation, respectively, for phenol and p-methylphenol. This observation is consistent with the greater extent of bioregeneration for phenol-loaded PAC as compared to p-methylphenol-loaded PAC.     

Process evaluation for optimization of EDTA use and recovery for heavy metal removal from a contaminated soil

This study aimed to establish an optimized, closed loop application of ethylenediaminetetraacetic acid (EDTA) in heavy metal removals from a contaminated soil through integrating EDTA recovery/regeneration and metal precipitation processes in the treatment train. Three divalent heavy metals were investigated, namely, Pb, Cd, and Ni. The extractability of the metals by EDTA followed the decreasing order of CdPb>Ni. The first part of this study was to search for the optimal use of the fresh EDTA in removing these heavy metals from the contaminated soil. The second part of this study was devoted to the recovery/regeneration of the spent EDTA which followed the sequential processes involving (1) complex destabilization by adding ferric ion (Fe(III)) to liberate Pb, Cd, and Ni, (2) precipitation of the liberated Pb, Cd, and Ni in phosphate (PO4(3-)) forms, and (3) precipitation of the excess Fe(III) which eventually produced free EDTA for reuse. The process variables were dosages of Fe(III) and PO4(3-), pH and reaction times. Laborious trial experiments would be needed in searching for the optimum conditions for the above processes. To expedite this exercise, a geochemical equilibrium model, MINTEQA2, was used to find the thermodynamically favorable conditions for recoveries of both EDTA and heavy metals. This was then followed by experimental examination of the process kinetics to observe for the optimal reaction time for each thermodynamically favorable process. This study revealed that 2 h of reaction time each for the complex destabilization reaction and the metal phosphate precipitation reaction was sufficient to achieve equilibrium. With the optimized process condition identified in this study, a total of 95%, 89% and 90% of the extracted Pb, Cd and Ni, respectively, could be precipitated from the spent EDTA solution, with 84% EDTA recovery. The reused EDTA maintained more than 90% of its preceding extraction power in each cycle of reuse.     

Development of a Speciated,Hourly, and Gridded Air Pollutants Emission Modeling System—A Case Study on the Precursors of Photochemical Smog in the Seoul Metropolitan Area,Korea

ABSTRACT

A speciated, hourly, and gridded air pollutants emission modeling system (SHEMS) was developed and applied in predicting hourly nitrogen dioxide (NO₂) and ozone (O₃) levels in the Seoul Metropolitan Area (SMA). The primary goal of the SHEMS was to produce a systemized emission inventory for air pollutants including ozone precursors for modeling air quality in urban areas.

The SHEMS is principally composed of three parts: (1) a pre-processor to process emission factors, activity levels, and spatial and temporal information using a geographical information system; (2) an emission model for each source type; and (3) a post-processor to produce report and input data for air quality models through database modeling. The source categories in SHEMS are point, area, mobile, natural, and other sources such as fugitive emissions. The emission database produced by SHEMS contains 22 inventoried compounds: sulfur dioxide, NO₂, carbon monoxide, and 19 speciated volatile organic compounds. To validate SHEMS, the emission data were tested with the Urban Airshed Model to predict NO₂ and O₃ concentrations in the SMA during selected episode days in 1994. The results turned out to be reliable in describing temporal variation and spatial distribution of those pollutants.     

A real-time monitoring and assessment method for calculation of total amounts of indoor air pollutants emitted in subway stations

Subway systems are considered as main public transportation facility in developed countries. Time spent by people in indoors, such as underground spaces, subway stations, and indoor buildings, has gradually increased in the recent past. Especially, operators or old persons who stay in indoor environments more than 15 hr per day usually influenced a greater extent by indoor air pollutants. Hence, regulations on indoor air pollutants are needed to ensure good health of people. Therefore, in this study, a new cumulative calculation method for the estimation of total amounts of indoor air pollutants emitted inside the subway station is proposed by taking cumulative amounts of indoor air pollutants based on integration concept. Minimum concentration of individual air pollutants which naturally exist in indoor space is referred as base concentration of air pollutants and can be found from the data collected. After subtracting the value of base concentration from data point of each data set of indoor air pollutant, the primary quantity of emitted air pollutant is calculated. After integration is carried out with these values, adding the base concentration to the integration quantity gives the total amount of indoor air pollutant emitted. Moreover, the values of new index for cumulative indoor air quality obtained for 1 day are calculated using the values of cumulative air quality index (CAI). Cumulative comprehensive indoor air quality index (CCIAI) is also proposed to compare the values of cumulative concentrations of indoor air pollutants. From the results, it is clear that the cumulative assessment approach of indoor air quality (IAQ) is useful for monitoring the values of total amounts of indoor air pollutants emitted, in case of exposure to indoor air pollutants for a long time. Also, the values of CCIAI are influenced more by the values of concentration of NO₂, which is released due to the use of air conditioners and combustion of the fuel. The results obtained in this study confirm that the proposed method can be applied to monitor total amounts of indoor air pollutants emitted, inside apartments and hospitals as well.

Implications: Nowadays, subway systems are considered as main public transportation facility in developed countries. Time spent by people in indoors, such as underground spaces, subway stations, and indoor buildings, has gradually increased in the recent past. Especially, operators or old persons who stay in the indoor environments more than 15 hr per day usually influenced a greater extent by indoor air pollutants. Hence, regulations on indoor air pollutants are needed to ensure good health of people. Therefore, this paper presents a new methodology for monitoring and assessing total amounts of indoor air pollutants emitted inside underground spaces and subway stations. A new methodology for the calculation of cumulative amounts of indoor air pollutants based on integration concept is proposed. The results suggest that the cumulative assessment approach of IAQ is useful for monitoring the values of total amounts of indoor air pollutants, if indoor air pollutants accumulated for a long time, especially NO₂ pollutants. The results obtained here confirm that the proposed method can be applied to monitor total amounts of indoor air pollutants emitted, inside apartments and hospitals as well.     

Chemical characteristics of fine particulate matters measured during severe winter haze events in Ulaanbaatar,Mongolia

In order to investigate the chemical characteristics of atmospheric aerosol measured during a severe winter haze event, 12-hr PM_2.5 (particulate matter with an aerodynamic diameter ≤2.5 μm) samples were collected at an urban site in Ulaanbaatar, Mongolia, from January 9 to February 17, 2008. On average, 12-hr PM_2.5 mass concentration was 105.1 ± 34.9 μg/m³. Low PM_2.5 mass concentrations were measured when low pressure developed over central Mongolia. The 12-hr average organic mass by carbon (OMC) varied from 6.4 to 132.3 μg/m³, with a mean of 54.9 ± 25.4 μg/m³, whereas elemental carbon (EC) concentration ranged from 0.1 to 3.6 μgC/m³, with a mean of 1.5 ± 0.8 μgC/m³. Ammonium sulfate was found to be the most abundant water-soluble ionic component in Ulaanbaatar during the sampling period, with an average concentration of 11.3 ± 5.0 μg/m³. In order to characterize the effect of air mass pathway on fine particulate matter characteristics, 5-day back-trajectory analysis was conducted, using the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model. The haze level was classified into three categories, based on the 5-day air mass back trajectories, as Stagnant (ST), Continental (CT), and Low Pressure (LP) cases. PM_2.5 mass concentration during the Stagnant condition was approximately 2.5 times higher than that during the Low Pressure condition, mainly due to increased pollutant concentration of OMC and secondary ammonium sulfate.

Implications: Mongolia is experiencing rapid rates of urbanization similar to other Asian countries, resulting in air pollution problems by the growing number of automobiles and industrialization. Ulaanbaatar, capital of Mongolia, is inherently vulnerable to air pollution because of its emission sources, topography, and meteorological characteristics. Very limited measurements on chemical characteristics of particulate matter have been carried out in Ulaanbaatar, Mongolia.