Determinants of homeowners' attitudes to the installation of high-voltage overhead transmission lines

This article deals comprehensively with factors which influence attitudes to the placement of high-voltage overhead transmission lines (HVOTLs). It employs an analytical schema which links the initial stimulus of the power lines' proposal in an area to Background and Socio-economic independent variables and a set of mediating variables. From a survey of 600 residents in three different domiciliary settings in Queensland, Australia, results indicate an absence of positive attitudes and, at best, neutral ones to HVOTL placement. By multinomial logistic regression, the study probes the grounds behind negativity and extreme negativity, uncovering direct links between these attitudes and certain of the variables included in the analytical schema.     

Effect of culture time on the growth curve and power performance in a microbial fuel cell at a fixed amount of liquid culture

The microbial fuel cell uses the microorganism biochemistry to carry on the energy conversion. Concerning the experimental precision, the colony culture would be replaced by a fixed amount of liquid culture for Microbial fuel cell of Escherichia coli. The anode and cathode chambers whose each volume is 100 mL were utilized, the effective surface area of proton exchange membrane Nafion-117 is about 9 cm². In addition, the electrode area of carbon cloth is 20 cm². Three kinds of Escherichia coli, named as BCRC No. 10322, 10675 and 51534, respectively, would be selected. Results show that the electricity performance of Escherichia coli of BCRC No.51534 is better than the other microorganism studied because of having a larger open circuit voltage of 1.01 V and limiting current 22 mA, the maximum power density of 1342 mW/m^2, and average working power density of 295 mW/m² would be produced. These results would be useful to improve the performance of microbial fuel cell.     

Impact of natural and calcined starfish (<Emphasis Type="Italic">Asterina pectinifera</Emphasis>) on the stabilization of Pb,Zn and As in contaminated agricultural soil

Metal stabilization using soil amendments is an extensively applied, economically viable and environmentally friendly remediation technique. The stabilization of Pb, Zn and As in contaminated soils was evaluated using natural starfish (NSF) and calcined starfish (CSF) wastes at different application rates (0, 2.5, 5.0 and 10.0 wt%). An incubation study was conducted over 14 months, and the efficiency of stabilization for Pb, Zn and As in soil was evaluated by the toxicity characteristic leaching procedure (TCLP) test. The TCLP-extractable Pb was reduced by 76.3–100 and 91.2–100 % in soil treated with NSF and CSF, respectively. The TCLP-extractable Zn was also reduced by 89.8–100 and 93.2–100 % in soil treated with NSF and CSF, respectively. These reductions could be associated with the increased metal adsorption and the formation of insoluble metal precipitates due to increased soil pH following application of the amendments. However, the TCLP-extractable As was increased in the soil treated with NSF, possibly due to the competitive adsorption of phosphorous. In contrast, the TCLP-extractable As in the 10 % CSF treatment was not detectable because insoluble Ca–As compounds might be formed at high pH values. Thermodynamic modeling by visual MINTEQ predicted the formation of ettringite (Ca₆Al₂(SO₄)₃(OH)₁₂·26H₂O) and portlandite (Ca(OH)₂) in the 10 % CSF-treated soil, while SEM–EDS analysis confirmed the needle-like structure of ettringite in which Pb was incorporated and stabilized in the 10 % CSF treatment.     

Future-year ozone prediction for the United States using updated models and inputs

The relationship between emission reductions and changes in ozone can be studied using photochemical grid models. These models are updated with new information as it becomes available. The primary objective of this study was to update the previous Collet et al. studies by using the most up-to-date (at the time the study was done) modeling emission tools, inventories, and meteorology available to conduct ozone source attribution and sensitivity studies. Results show future-year, 2030, design values for 8-hr ozone concentrations were lower than base-year values, 2011. The ozone source attribution results for selected cities showed that boundary conditions were the dominant contributors to ozone concentrations at the western U.S. locations, and were important for many of the eastern U.S. locations. Point sources were generally more important in the eastern United States than in the western United States. The contributions of on-road mobile emissions were less than 5 ppb at a majority of the cities selected for analysis. The higher-order decoupled direct method (HDDM) results showed that in most of the locations selected for analysis, NOx emission reductions were more effective than VOC emission reductions in reducing ozone levels. The source attribution results from this study provide useful information on the important source categories and provide some initial guidance on future emission reduction strategies.

Implications: The relationship between emission reductions and changes in ozone can be studied using photochemical grid models, which are updated with new available information. This study was to update the previous Collet et al. studies by using the most current, at the time the study was done, models and inventory to conduct ozone source attribution and sensitivity studies. The source attribution results from this study provide useful information on the important source categories and provide some initial guidance on future emission reduction strategies.     

Morphological and chemical composition characteristics of summertime atmospheric particles collected at Tokchok Island,Korea

Determination of the chemical compositions of atmospheric single particles in the Yellow Sea region is critical for evaluating the environmental impact caused by air pollutants emitted from mainland China and the Korean peninsula. After ambient aerosol particles were collected by the Dekati PM10 cascade impactor on July 17–23, 2007 at Tokchok Island (approximately 50 km west of the Korean coast nearby Seoul), Korea, overall 2000 particles (on stage 2 and 3 with cut-off diameters of 2.5–10 μm and 1.0–2.5 μm, respectively) in 10 samples were determined by using low-Z particle electron probe X-ray microanalysis. X-ray spectral and secondary electron image (SEI) data showed that soil-derived and sea-salt particles which had reacted or were mixed with SO₂ and NO_x (or their acidic products) outnumbered the primary and “genuine” ones (59.2% vs. 19.2% in the stage 2 fraction and 41.3% vs. 9.9% in the stage 3 fraction). Moreover, particles containing nitrate in the secondary soil-derived species greatly outnumbered those containing sulfate. Organic particles, mainly consisting of marine biogenic species, were more abundant in the stage 2 fraction than in the stage 3 fraction (11.6% vs. 5.1%). Their relative abundance was greater than the sum of carbon-rich, K-containing, Fe-containing, and fly ash particles, which exhibited low frequencies in all the samples. In addition, many droplets rich in C, N, O, and S were observed. They tended to be small, exhibiting a dark round shape on SEI, and generally included 8–20 at.% C, 0–12 at.% N, 60–80 at.% O, and 4–10 at.% S (sometimes with <3 at.% Mg and Na). They were attributed to be a mixture of carbonaceous matter, H₂SO₄, and NH₄HSO₄/(NH₄)₂SO₄, mostly from the reaction of atmospheric SO₂ with NH₃ under high relative humidity. The analysis of the relationship between the aerosol particle compositions and 72-h backward air-mass trajectories suggests that ambient aerosols at Tokchok Island are strongly affected not only by seawater from the Yellow Sea but also by anthropogenic pollutants emitted from China and the Seoul–Incheon metropolis, resulting in the dominance of complex secondary aerosol particles.     

Aerosol chemistry and the effect of aerosol water content on visibility impairment and radiative forcing in Guangzhou during the 2006 Pearl River Delta campaign

Optical and chemical aerosol measurements were obtained from 2 to 31 July 2006 at an urban site in the metropolitan area of Guangzhou (China) as part of the Program of Regional Integrated Experiment of Air Quality over Pearl River Delta (PRIDE-PRD2006) to investigate aerosol chemistry and the effect of aerosol water content on visibility impairment and radiative forcing. During the PRIDE-PRD2006 campaign, the average contributions of ammonium sulfate, organic mass by carbon (OMC), elemental carbon (EC), and sea salt (SS) to total PM_2.5 mass were measured to be 36.5%, 5.7%, 27.1%, 7.8%, and 3.7%, respectively. Compared with the clean marine period, (NH₄)₂SO₄, NH₄NO₃, and OMC were all greatly enhanced (by up to 430%) during local haze periods via the accumulation of a secondary aerosol component. The OMC dominance increased when high levels of biomass burning influenced the measurement site while (NH₄)₂SO₄ and OMC did when both biomass burning and industrial emissions influenced it. The effect of aerosol water content on the total light-extinction coefficient was estimated to be 34.2%, of which 25.8% was due to aerosol water in (NH₄)₂SO₄, 5.1% that in NH₄NO₃, and 3.3% that in SS. The average mass-scattering efficiency (MSE) of PM₁₀ particles was determined to be 2.2 ± 0.6 and 4.6 ± 1.7 m² g⁻¹ under dry (RH < 40%) and ambient conditions, respectively. The average single-scattering albedo (SSA) was 0.80 ± 0.08 and 0.90 ± 0.04 under dry and ambient conditions, respectively. Not only are the extinction and scattering coefficients greatly enhanced by aerosol water content, but MSE and SSA are also highly sensitive. It can be concluded that sulfate and carbonaceous aerosol, as well as aerosol water content, play important roles in the processes that determine visibility impairment and radiative forcing in the ambient atmosphere of the Guangzhou urban area.     

Seasonal Variations and Chemical Forms of Heavy Metals in Soils and Dusts from the Satellite Cities of Seoul, Korea

This research investigated heavy metal pollution of soils and dusts in two representative satellite cities of Seoul, Korea and studied the seasonal variations in metal concentrations through the rainy season and the chemical forms of metals using a sequential extraction analysis. The metal dispersion pattern was illustrated to match with urban structure. Soil and dust samples were collected from the cities of Uijeongbu and Koyang, which are the northern and northwestern satellite cities of Seoul (the capital), before and after rainy season. Concentrations of Cu, Pb and Zn were higher than those of the world averages for soils, and their levels decreased after rain, particularly in highly contaminated samples. Relatively high pH values were found in roadside soils, but no seasonal variation was found after the rainy season. The three metals (Cu, Pb and Zn) in soils and dusts were associated with various chemical fractions of soils and dusts as distinguished by the sequential extraction scheme, and a strong similarity of metal association between soils and dusts was found, which indicates that airborne dust may be a principle source of soil contamination. Copper is uniformly distributed, and Pb is largely associated with the reducible phase. There is an appreciable proportion of total Zn in the exchangeable/water-acid soluble fraction. After the rainy season, the most soluble fractions in soils and dusts were leached away. In terms of mobility and bioavailability of metals in soils and dusts, the order Zn >> Cu > Pb is suggested. Geographical variations of total metals corresponded well with urbanised areas of cities, especially the industrial complex and major motorways.     

Synchronization of amniotic fluid cells for high resolution cytogenetics

A high resolution technique was applied to amniotic fluid cells by synchronization. After inoculation, the cells were incubated for 30 h in the presence of either thymidine or 5-bromodeoxyuridine (BrdU). After removal of the blocking agent and addition of a low concentration of thymidine, the cells were incubated for another 6 1/2–7 h, then harvested in prometaphase without colcemid. This technique gives a mitotic index of 3·7 per cent after thymidine synchronization and of 3·2 per cent after BrdU synchronization, and more than half of the mitoses were in the earlier phases with the chromosomes showing more than 550 bands per haploid set. GBG, GTG, and RHG prometaphases are presented. Precise high-resolution banding of chromosomes of amniotic fluid cells can increase diagnostic accuracy.     

The measurement of corporate environmental performance and its application to the analysis of efficiency in oil industry

This paper addresses a measurement of corporate environmental performance, and its application to the analysis of efficiency in the petroleum firms. In order to measure firms' environmental performance, we suggest a framework called “Gscore” that consists of five categories, namely general environmental management (GEM), input, process, output, and outcome. Gscore is a proxy measure of corporate environmental performance based on voluntary environment, health, and safety (EHS) report and is calculated by aggregating the points of the above five-categories. We apply our measurement framework to the data of 39 firms' voluntary EHS reports which are available on the internet. Ten of them, on which efficiency analysis was conducted with Gscore, assets, employee, and profits, are in petroleum and refining industry. According to our results: (1) a gap is found between rhetoric and practical environmental management stemming from calculating the relation between GEM and data part in 39 EHS reports. (2) On the whole, EHS reports of petroleum firms have something in common, but there are significant differences in the type and amounts of disclosed data among the EHS reports. (3) From the results of efficiency analysis, it is found that the number of employee exerts a considerable influence on determining the relative efficiency of petroleum firms, then Gscore, profits, and assets in sequence. Furthermore, Exxon, Ashland, Phillips Petroleum, and ARCO are shown to be efficient among 10 petroleum firms.