Human health risk assessment of explosives and heavy metals at a military gunnery range

In this research, a risk assessment was undertaken in order to develop the remediation and management strategy of a contaminated gunnery site, where a nearby flood controlling reservoir is under construction. Six chemicals, including explosives and heavy metals, posing potential risk to environmental and human health, were targeted in this study. A site-specific conceptual site model was constructed, based on effective, reasonable exposure pathways, to avoid any overestimation of the risk. Also, conservative default values were adapted to prevent underestimation of the risk when site-specific values were not available. The risks posed by the six contaminants were calculated using the API’s Decision Support System for Exposure and Risk Assessment, with several assumptions. In the crater-formed-area (Ac), the non-carcinogenic risks (i.e., HI values) of tri-nitro-toluene (TNT) and Cd were slightly larger than 1, but for RDX (Royal Demolition Explosives) was over 50. The total non-carcinogenic risk of the whole gunnery range was calculated to be 62.5, which was a significantly high value. The carcinogenicity of Cd was estimated to be about 10⁻³, while that for Pb was about 5 × 10⁻⁴, which greatly exceeded the generally acceptable carcinogenic risk level of 10⁻⁴–10⁻⁶. It was concluded from the risk assessment that there is an immediate need for remediation of both carcinogens and non-carcinogens before construction of the reservoir. However, for a more accurate risk assessment, further specific estimations of the changes in environmental conditions due to the construction of the reservoir will be required; and more over, the effects of the pollutants to the ecosystem will also need to be evaluated.     

Reduction of Norovirus Surrogates Alone and in Association with Bacteria on Leaf Lettuce and Tomatoes During Application of Aqueous Ozone

Food and Environmental Virology - Retail foodservice establishments (FSE) frequently utilize washes with sanitizing agents during fresh produce preparation. This study evaluated the efficacy of...     

Monitoring biofouling based on aerobic respiration in reverse osmosis system

A monitoring method of biofouling in reverse osmosis (RO) system was proposed based on the fluorescent signal of resorufin, which is reduced by nicotinamide adenine dinucleotide released from viable cells during aerobic respiration. The fluorescent signal of resorufin reduced by planktonic cells and microorganisms of biofilm showed linearity, indicating its feasibility to monitor biofouling in a RO system. For the application of the method to the lab-scale RO system, the injection concentration of resazurin and the injection flow rate were optimized. Biofilm on RO membranes continuously operated in a lab-scale RO system was estimated by resorufin fluorescence under optimized detection condition. As a result, resorufin fluorescence on RO membrane showed a significant increase in which the permeability of RO system decreased by 30.48%. Moreover, it represented the development of biofilm as much as conventional biofilm parameters such as adenosine triphosphate, extracellular polymeric substances, and biofilm thickness. The proposed method could be used as a sensitive and low-cost technology to monitor biofouling without autopsy of membranes.     

Characterization of particulate matter from diesel passenger cars tested on chassis dynamometers

Emission characterization of particle number as well as particle mass from three diesel passenger cars equipped with diesel particulate filter(DPF), diesel oxidation catalyst(DOC)and exhaust gas recirculation(EGR) under the vehicle driving cycles and regulatory cycle.Total particle number emissions(PNEs) decreased gradually during speed-up of vehicle from 17.3 to 97.3 km/hr. As the average vehicle speed increases, the size-segregated peak of particle number concentration shifts to smaller size ranges of particles. The correlation analysis with various particulate components such as particle number concentration(PNC),ultrafine particle number concentration(UFPNC) and particulate matter(PM) mass was conducted to compare gaseous compounds(CO, CO_2, HC and NOx). The UFPNC and PM were not only emitted highly in Seoul during severe traffic jam conditions, but also have good correlation with hydrocarbons and NOxinfluencing high potential on secondary aerosol generation. The effect of the dilution temperature on total PNC under the New European Driving Cycle(NEDC), was slightly higher than the dilution ratio. In addition, the nuclei mode(DP: ≤ 13 nm) was confirmed to be more sensitive to the dilution temperature rather than other particle size ranges. Comparison with particle composition between vehicle speed cycles and regulatory cycle showed that sulfate was slightly increased at regulatory cycle, while other components were relatively similar. During cold start test, semivolatile nucleation particles were increased due to effect of cold environment. Research on particle formation dependent on dilution conditions of diesel passenger cars under the NEDC is important to verify impact on vehicular traffic and secondary aerosol formation in Seoul.     

Extension of TACOM to the complexity of tasks designed for abnormal situations in nuclear power plants

TACOM (TAsk COMplexity) is a measure for evaluating the complexity of tasks prescribed for emergency situations in nuclear power plants. Five sub-measures constituting TACOM represent five different aspects of the task complexity exhibited in operating procedures for emergency situations. The practicality of TACOM has been verified through a series of empirical studies. However, tasks designed for abnormal situations that can significantly affect the safety of nuclear power plants, also need a proper measure for evaluating their complexity. TACOM provides a process, a systematic cognitive task analysis method and a set of guidelines to support its application. Therefore, although the characteristics of abnormal task situations are not the same as those of emergency situations, TACOM seems to be reasonably applied to abnormal situations or at least to offer meaningful insights for developing a measure for evaluating the complexity of tasks in abnormal situations. Thus this study examined the applicability of TACOM to abnormal situations through case studies. Particular attention was paid to the sufficiency and appropriateness of the three methodological tools, which are the process, the cognitive task analysis method and the set of guidelines. Collective consideration of the case studies and the characteristics of tasks prescribed for abnormal situations led us to draw the conclusion that TACOM could be reliably used for abnormal situations as well. This paper reports the process of how to apply TACOM to the tasks of abnormal situations and discusses some lessons learned through this application.     

Recycling of tailings from Korea Molybdenum Corporation as admixture for high-fluidity concrete

The main objective of this study is to develop an eco-friendly and a large recycling technique of flotation Tailings from korea (TK) from metal mines as construction materials such as admixtures for high-fluidity concrete (HFC). TK used in this study was obtained from the Korea Molybdenum Corporation in operation. TK was used as the alternative material to adjust flowability and viscosity of HFC in the form of powder agent which enables adjustment of concrete compressive strength. In this study, we have performed concrete rheological tests and concrete flowability tests to obtain the quality characteristics of TK for using as the admixture in producing HFC. The results indicated that the adequate mix ratio of cement to TK should be 8:2 (vol%). It is more effective to use the TK as admixture to control flowability, viscosity and strength of HFC than the normal concrete. It was found that TK could be recycled construction materials in bulk such as admixture for HFC, in terms of the economic and eco-friendly aspects.     

Development of PAOT Tool Kit for Work Improvements in Clinical Nursing

The aim of this study was to develop an action checklist for educational training of clinical nurses. The study used qualitative and quantitative methods. Questionnaire items were extracted through in-depth interviews and a questionnaire survey. PASW version 19 and AMOS version 19 were used for data analyses. Reliability and validity were tested with both exploratory and confirmative factor analysis. The levels of the indicators related to goodness-of-fit were acceptable. Thus, a model kit of work improvements in clinical nursing was developed. It comprises 5 domains (16 action points): health promotion (5 action points), work management (3 action points), ergonomic work methods (3 action points), managerial policies and mutual support among staff members (3 action points), and welfare in the work area (2 action points).     

Determinants of homeowners' attitudes to the installation of high-voltage overhead transmission lines

This article deals comprehensively with factors which influence attitudes to the placement of high-voltage overhead transmission lines (HVOTLs). It employs an analytical schema which links the initial stimulus of the power lines' proposal in an area to Background and Socio-economic independent variables and a set of mediating variables. From a survey of 600 residents in three different domiciliary settings in Queensland, Australia, results indicate an absence of positive attitudes and, at best, neutral ones to HVOTL placement. By multinomial logistic regression, the study probes the grounds behind negativity and extreme negativity, uncovering direct links between these attitudes and certain of the variables included in the analytical schema.     

Effect of culture time on the growth curve and power performance in a microbial fuel cell at a fixed amount of liquid culture

The microbial fuel cell uses the microorganism biochemistry to carry on the energy conversion. Concerning the experimental precision, the colony culture would be replaced by a fixed amount of liquid culture for Microbial fuel cell of Escherichia coli. The anode and cathode chambers whose each volume is 100 mL were utilized, the effective surface area of proton exchange membrane Nafion-117 is about 9 cm². In addition, the electrode area of carbon cloth is 20 cm². Three kinds of Escherichia coli, named as BCRC No. 10322, 10675 and 51534, respectively, would be selected. Results show that the electricity performance of Escherichia coli of BCRC No.51534 is better than the other microorganism studied because of having a larger open circuit voltage of 1.01 V and limiting current 22 mA, the maximum power density of 1342 mW/m^2, and average working power density of 295 mW/m² would be produced. These results would be useful to improve the performance of microbial fuel cell.