Oil spreading in instantaneous and continuous spills on rotating earth

The effect of the Coriolis force on the oil spill spreading in the gravity-viscous regime is examined. A new shallow water model for the transport and spreading of oil slick of arbitrary shape is described in which the Coriolis force is included in the momentum equations and the oil–water friction is parameterized in a frame of the boundary layer theory including the Ekman friction. The numerical Lagrangian method based on smoothed particle dynamics is described. New similarity solutions of the model equations are obtained for unidirectional and axisymmetric spreading in gravity-viscous, gravity-turbulent and gravity-viscous-rotational regimes for instantaneous as well as continuous releases. The numerical simulation extends these results for the case of continuous release in the presence of currents. It was shown that Coriolis term in the momentum equation can be omitted if slick thickness is much less of the laminar Ekman layer thickness. However, the Ekman friction should be retained for slicks of any thickness for larger times. The Ekman friction results in the essential slowdown of the spreading as well as in the deflection of the oil spreading velocity at 45° from the direction of velocity in the non-rotation case. Numerical simulations of large-scale spills showed that after the 2?days the slick area with the Coriolis effect was approximately less than half of that without rotation. Therefore, the earth rotation can be also important in the oil weathering.     

Ecotoxicity evaluation of Cu- and Fe-CNT complexes based on the activity of bacterial bioluminescence and seed germination

The toxic effects of the composites of Fe~0 and Cu~0 with different percentages of CNTs were examined based on the activity of bacterial bioluminescence and seed germination. In terms of the EC_50 values, the toxic effects of Cu~0 on bacterial bioluminescence and seed germination were approximately 2 and 180 times greater than that of Fe~0, respectively. The toxicity increased with increasing CNT content in the Cu-CNT mixtures for both organisms,whereas opposite results were observed with Fe-CNT mixtures. The mean toxic effects of Cu-CNT(6%) were approximately 1.3–1.4 times greater than that of Cu-CNT(0%), whereas the toxic effects of Fe-CNT(6%) were approximately 2.1–2.5 times lower than that of Fe-CNT(0%) for both the bioluminescence activity and seed germination. The causes of this phenomenon are unclear at this point. More research will be needed to elucidate the mechanism of the toxicity of nano-mixture materials and the causes of the different patterns of toxicity with Cu-and Fe-CNT mixtures.     

The environmental impact of industrialization in East Asia and strategies toward sustainable development

The East Asian economy has been growing fast in recent years, and environmental stresses are building up rapidly. Transboundary air pollution, water shortages, drinking water contamination, freshwater and marine pollution, deforestation, climatic disasters, and other environmental problems are becoming serious threats to the well-being of people in this densely populated region. The ESI (environmental sustainability index) reported by the World Economic Forum in 2005 is a good indicator of the environmental status of the region; most East Asian countries ranked at the bottom. East Asia is not moving toward a sustainable society, and the environment will not sustain the current rate of economic development for long. The traditional culture of East Asia used to be sustainable, so we can learn much from our traditions. Land use should be planned from an ecological point of view so as to best preserve the land’s productivity and stability. There should be definite goals as to where and how much to preserve the three important ecological bases: forests, coastal wetlands and agricultural farms. The forest is the base for the terrestrial ecosystem, including flood control, water resources, and climate; the coastal wetland is the base for the marine ecosystem; farmland is the base for producing food. Within these defined goals, limits should be set on how much land can be utilized for activities like urban development, manufacturing, and recreation. Limits on the pollution load resulting from such activities should be set so as not to irreversibly damage the environment. Economic development should be planned to allow the use of energy and resources only after satisfying these constraints.

EPR characterization of the catalytic activity of clays for PCE removal by gamma-radiation induced by acid and thermal treatments

Clays from tidal flat sediments showed efficient catalytic activity in the decomposition of PCE by gamma-radiation. The highest PCE removal of 98.6% was obtained with clays heated to 700 degrees C after acid treatment. The improved catalytic activity was identified by electron paramagnetic resonance (EPR) spectroscopy. The EPR spectra of clays were significantly changed by the acid and thermal treatments. The intensity of a narrow signal at g=2 (signal III) was decreased with increasing thermal treatment temperature and this increased the PCE removal efficiency. The acid treatment completely removed a broad signal at g=2 (signal II), decreased the intensity of signal III, and improved the gamma-radiation treatment of PCE.     

Metal distribution in incineration residues of municipal solid waste (MSW) in Japan

This study aimed to identify distribution of metals and the influential factors on metal concentrations in incineration residues. Bottom ash and fly ash were sampled from 19 stoker and seven fluidized bed incinerators, which were selected to have a variety of furnace capacity, furnace temperature, and input waste. In the results, shredded bulky waste in input waste increased the concentration of some metals, such as Cd and Pb, and the effect was confirmed by analysis of shredded bulky waste. During MSW incineration, lithophilic metals such as Fe, Cu, Cr, and Al remained mainly in the bottom ash while Cd volatilized from the furnace and condensed to the fly ash. About two thirds of Pb and Zn was found in the bottom ash despite their high volatility. Finally, based on the results obtained in this study, the amount of metal in incineration residues of MSW was calculated and the loss of metal was estimated in terms of mass and money. A considerable amount of metal was found to be lost as waste material by landfilling of incineration residues.     

Accelerating preliminary eco-innovation design for products that integrates case-based reasoning and TRIZ method

While the innovativeness and market potential of a new product is normally emphasized, its environmental impact is often neglected. Despite their ability to help designers reduce the environmental impact of products throughout their life cycle, many eco-design methods focus on the redesign of existing products, necessitating a more innovative design capacity. This work describes a novel model to accelerate the preliminary eco-innovation product design by integrating the advantages of case-based reasoning and the TRIZ method. Previous cases from a database support a novel design to satisfy functional performances under the CBR framework. The innovative principles and evolution patterns of the TRIZ method can enhance the design level of new products to achieve eco-innovation. Four eco-innovation concepts for a PC mouse demonstrate the effectiveness of the proposed model.     

Balancing the energy demand by a resource circulation project in Daejeon,Korea

Demand for sustainable renewable energy is on an increase worldwide, whereas the supply is limited. This paper analyses the feasibility of generating electricity and supplying the surplus steam to Daeduk Industrial Complex, by incinerating the combustible municipal waste generated in Daejeon Metropolitan City. The economic feasibility of surplus biogas generated from the anaerobic digestion of food waste and food waste leachate has been analysed. This study estimated resource circulation facility to supply 23,200 m³/day of biogas generated to Daejeon Combined Heat and Power plant. By 2023, it is expected to supply 25.7 tons of steam per hour all year round. The additional steam demand in Daeduk Industrial Complex is estimated as 101,537 tons/year. Surplus biogas will be supplied through an additional 960-m new installation. The cost of biogas is estimated at 30% of the unit biogas production cost. Daejeon Combined Heat and Power plant expects to make 60% additional profit, and Daeduk Industrial Complex and the communities nearby expect to achieve 10% cost savings. It also reduces the dependence of energy on fossil fuels, contributes to national environmental energy policy in reduction in greenhouse gases, creates competitiveness in local business and reduces corporate tax and generates revenue.     

Risk of serious injury of occupants involved in frontal crashes of cab-over-type trucks

Objectives: Truck vehicles (TVs) have a different structure and stiffness than non-TVs and are used commercially for transporting goods. This study aimed to analyze whether truck occupants have a greater risk of serious injury than those of other types of vehicles.

Methods: Crash data were obtained from the Korean In-Depth Data Analysis Study (KIDAS) for calendar years 2011–2016. Vehicles involved in frontal crash were included and classified into TVs and non-TVs (passenger cars and sports utility vehicles). We compared the demographic characteristics and serious injuries by body region between the 2 groups and analyzed factors that contributed to the serious injury severity from frontal crashes.

Results: The analysis was based on 884 occupants; 177 (20.0%) were in TVs and 707 (80.0%) were in non-TVs. Non-TVs had more frontal airbags deployments than TVs (50.9% vs. 3.4%, P <.01). TV occupants were 4.8 times more likely to have a serious lower extremity (LE) injury (adjusted odds ratio [AOR] = 4.820; 95% confidence interval [CI], 2.407–9.653) and 2.5 times to have a serious abdominal injury (AOR = 2.465; 95% CI, 1.108–5.487) compared to non-TV occupants.

Conclusions: Truck occupants had more serious LE and abdominal injuries than those of other types of vehicles in frontal crashes. Structural improvement and legislative efforts to develop safety systems are necessary to improve the safety of truck occupants.     

Evaluation of the relationship between two different methods for enumeration fecal indicator bacteria： Colony-forming unit and most probable number

Most probable number (MPN) and colony-forming unit (CFU) estimates of fecal indicator bacteria (FIB) concentration are common measures of water quality in aquatic environments. Thus, FIB intensively monitored in Yeongsan Watershed in an attempt to compare two di erent methods and to develop a statistical model to convert from CFU to MPN estimates or vice versa. As a result, the significant di erence was found in the MPN and CFU estimates. The enumerated Escherichia coli concentrations in MPN are greater than those in CFU, except for the measurement in winter. Especially in fall, E. coli concentrations in MPN are one order of magnitude greater than that in CFU. Contrarily, enterococci bacteria in MPN are lower than those in CFU. However, in general, a strongly positive relationship are found between MPN and CFU estimates. Therefore, the statistical models were developed, and showed the reasonable converting FIB concentrations from CFU estimates to MPN estimates. We expect this study will provide preliminary information towards future research on whether di erent analysis methods may result in di erent water quality standard violation frequencies for the same water sample.