Application of powdered activated carbon coating to fabrics in a hybrid filter to enhance mercury removal

Elemental mercury(Hg0) is predominant constituent of flue gas emitted from coal-fired power plants. Adsorption has been considered the best available technology for removal of Hg0 from flue gas. However, adsorbent injection increases the amount of ash generated. In the present study, powdered activated carbon(PAC) was coated on polytetrafluoroethylene/glass fiber filters to increase Hg0 removal while concurrently reducing the amount of ash generated. The optimal PAC coating rate was determined in laboratory experiments to ensure better Hg0 removal with low pressure drop. When PAC of particle size less than 45 μm was used, and the areal density was 50 g/m2, the pressure drop remained under 30 Pa while the Hg0 removal efficiency increased to 15.8% from4.3%. The Hg0 removal efficiency also increased with decrease in filtration velocity. The optimal PAC coating rate was applied on a hybrid filter(HF), which was combined with a bag filter and an electrostatic precipitator in a single chamber. Originally designed to remove fine particulates matter, it was retrofitted to the flue gas control device for simultaneous Hg0 removal. By employing the PAC coating, the Hg removal efficiency of the HF increased to 79.79% from 66.35%. Also, a temporary reduction in Hg removal was seen but this was resolved following a cleaning cycle in which the dust layer was removed.     

Highly siliceous MCM-48 from rice husk ash for CO2 adsorption

Mesoporous MCM-48 silica was synthesized using a cationic-neutral surfactant mixture as the structure-directing template and rice husk ash (RHA) as the silica source. The MCM-48 samples were characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), N₂ physisorption and SEM. X-ray diffraction pattern of the resulting MCM-48 revealed typical pattern of cubic Ia3d mesophase. BET results showed the MCM-48 to have a surface area of 1024 m²/g and FT-IR revealed a silanol functional group at about 3460 cm⁻¹. Breakthrough experiments in the presence of MCM-48 were also carried out to test the material's CO₂ adsorption capacity. The breakthrough time for CO₂ was found to decrease as the temperature increased from 298 K to 348 K. The steep slopes observed shows the CO₂ adsorption occurred very quickly, with only a minimal mass transfer effect and very fast kinetics. In addition, amine grafted MCM-48, APTS-MCM-48 (RHA), was prepared with the 3-aminopropyltriethoxysilane (APTS) to investigate the effect of amine functional group in CO₂ separation. An order of magnitude higher CO₂ adsorption capacity was obtained in the presence of APTS-MCM-48 (RHA) compared to that with MCM-48 (RHA). These results suggest that MCM-48 synthesized from rice husk ash could be usefully applied for CO₂ removal.     

Predicting Debris Yield From Burned Watersheds: Comparison of Statistical and Artificial Neural Network Models1

Abstract: Alluvial fans in southern California are continuously being developed for residential, industrial, commercial, and agricultural purposes. Development and alteration of alluvial fans often require consideration of mud and debris flows from burned mountain watersheds. Accurate prediction of sediment (hyper‐concentrated sediment or debris) yield is essential for the design, operation, and maintenance of debris basins to safeguard properly the general population. This paper presents results based on a statistical model and Artificial Neural Network (ANN) models. The models predict sediment yield caused by storms following wildfire events in burned mountainous watersheds. Both sediment yield prediction models have been developed for use in relatively small watersheds (50‐800 ha) in the greater Los Angeles area. The statistical model was developed using multiple regression analysis on sediment yield data collected from 1938 to 1983. Following the multiple regression analysis, a method for multi‐sequence sediment yield prediction under burned watershed conditions was developed. The statistical model was then calibrated based on 17 years of sediment yield, fire, and precipitation data collected between 1984 and 2000. The present study also evaluated ANN models created to predict the sediment yields. The training of the ANN models utilized single storm event data generated for the 17‐year period between 1984 and 2000 as the training input data. Training patterns and neural network architectures were varied to further study the ANN performance. Results from these models were compared with the available field data obtained from several debris basins within Los Angeles County. Both predictive models were then applied for hind‐casting the sediment prediction of several post 2000 events. Both the statistical and ANN models yield remarkably consistent results when compared with the measured field data. The results show that these models are very useful tools for predicting sediment yield sequences. The results can be used for scheduling cleanout operation of debris basins. It can be of great help in the planning of emergency response for burned areas to minimize the damage to properties and lives.     

Spatial and temporal variations in NO2 distributions over Beijing,China measured by imaging differential optical absorption spectroscopy

During the CAREBEIJING campaign in 2006, imaging differential optical absorption spectroscopy (I-DOAS) measurements were made from 08:00 to 16:00 on September 9 and 10 over Beijing, China. Detailed images of the near-surface NO₂ differential slant column density (DSCD) distribution over Beijing were obtained. Images with less than a 30-min temporal resolution showed both horizontal and vertical variations in NO₂ distributions. For DSCD to mixing ratio conversion, path length along the lines of I-DOAS lines of sight was estimated using the light-extinction coefficient and Ångstrom exponent data obtained by a transmissometer and a sunphotometer, respectively. Mixing ratios measured by an in-situ NO₂ analyzer were compared with those estimated by the I-DOAS instrument. The obtained temporal and spatial variations in NO₂ distributions measured by I-DOAS for the two days are interpreted with consideration of the locations of the major NO_x sources and local wind conditions. I-DOAS measurements have been applied in this study for estimating NO₂ distribution over an urban area with multiple and distributed emission sources. Results are obtained for estimated temporal and spatial NO₂ distributions over the urban atmosphere; demonstrating the capability of the I-DOAS technique. We discuss in this paper the use of I-DOAS measurements to estimate the NO₂ distribution over an urban area with multiple distributed emission sources.     

Electrostatic enhancement of collection efficiency of the fibrous filter pretreated with ionic surfactants

A study of the electrostatic enhancement of collection efficiency of filters pretreated with ionic surfactants has been carried out in controlled conditions with monodisperse aerosols. Cationic surfactant (dimethyl dioctadecylammonium bromide [DDAB]) and anionic surfactant (sodium oleate [SO]) were used to pretreat polypropylene fibrous filters as the positively and negatively charged filters, respectively. The effects of aerosol size, aerosol charge state, face velocity, aerosol type, and relative humidity (RH) were considered to elucidate their influence on the aerosol penetration. Results indicate that penetration through surfactant-pretreated filters was lower than that through untreated filters, and pretreatment of the filter with surfactant was observed not to affect the structure of the filter. The electrofieldmeter direct-measured the very clear electric field of filter when treating ionic surfactants. The results proved that pretreatment with surfactant caused filters to become charged. Comparing penetration through surfactant-pretreated filters with that through untreated filters with neutral aerosol, the penetration reduction factor of the surfactant-pretreated filters was in the range 1.3-2.2. Comparing aerosol penetration through the surfactant-pretreated filters with singly charged aerosol with that through untreated filters with uncharged aerosol indicates that the former decreases by a factor of 1.8-48.8. The surface fiber charges of the DDAB- and SO-pretreated filters were calculated to be 2.02 x 1(-10) C/m and -1.53 x 10(-1) degrees C/m. Moreover, the aerosol penetrations through the surfactant-pretreated filters increased with the face velocity. Surfactant-pretreated filters performed better against solid aerosol than against liquid aerosol. RH has no effect on aerosol penetration through the surfactant-pretreated filters. Regression equations for Coulombic and dielectrophoretic single-fiber efficiencies in terms of the dimensionless parameters could be fitted by the experimental measurements of surfactant-pretreated filters in this work.     

Sex in the tropics: reproduction of<Emphasis Type="Italic"> Chthamalus malayensis</Emphasis> Pilsbury (Class Cirripedia) at the equator

The reproduction of a key intertidal space occupier, the barnacle, Chthamalus malayensis, was examined over a 13-month period. The reproductive cycle of C. malayensis was studied at three shores (Singapore, east and west coast of Malaysia) near the centre of its geographical range. Testes, vesiculae seminales, ovaries and embryos were scored for their stages of development. Although, in general, C. malayensis contained gonads throughout the year, the timing and level of peak development varied between the three shores. Embryos were present throughout the year in west Malaysia but were absent for 4–5 months in east Malaysia (June–August and October) and Singapore (February, April and August). Variations in the reproductive cycles and brooding were not clearly linked to the timing of monsoons. The lack of seasonal peaks in breeding may be attributed to the relatively constant climatic conditions experienced near the equator.Communicated by M. S. Johnson, Crawley     

GENERATING DESIGN HYDROGRAPHS BY DEM ASSISTED GEOMORPHIC RUNOFF SIMULATION: A CASE STUDY1

ABSTRACT: The geomorphic instantaneous unit hydrograph (GIUH) may be one of the most successful methodologies for predicting flow characteristics in ungauged watersheds. However, one difficulty in applying the GIUH model is determination of travel time, and the other difficulty is the large amount of geomorphologic information required in the study watershed. Recently, using the kinematic-wave theory Lee and Yen (1997) have analytically determined the travel times for overland and channel flows in watersheds. The limitation of using an empirical velocity equation to estimate the runoff travel time for a specified watershed is then relaxed. To simplify the time-consuming work involved in geomorphic parameter measurement on topographic maps, the GIUH model is linked with geographic information systems to obtain geomorphic parameters from digital elevation models. In this paper, a case study performed for peak flow analysis in an ungauged watershed is presented. The geomorphic characteristics of the study watershed were analyzed using a digital elevation model and were used to construct the runoff simulation model. The design storm was then applied to the geomorphic runoff simulation model to obtain the design hydrograph. The analytical procedures proposed in this study can provide a convenient way for hydrologists to estimate hydrograph characteristics based on limited hydrologic information.     

SPATIAL VARIABILITY OF CONDUCTWITY AS APPLIED TO DISTRIBUTED PARAMETER INFILTRATION MODELS1

ABSTRACT: Two infiltration models, called VVSIM (variable variance stochastic infiltration model) and EVVSIM (enhanced variable variance stochastic infiltration model), are developed in this study. A distributed parameter infiltration model can estimate the amount of infiltration over a field area by computing the infiltration over zones of the field area. Hydraulic conductivity is the most important parameter determining infiltration in simulations by infiltration models. The performance of an infiltration model depends on how well the model accommodates the complicated spatial distribution of hydraulic conductivity. The two proposed models include the effects of spatial correlation of the conductivity distribution. Virtual conductivity fields are generated using the turning bands method. Monte Carlo simulations show that the proposed models give infiltration estimates more accurate than those obtained by the other models employed.     

Two-year follow-up study of nonregulatory recommendations for better air quality in indoor ice arenas

A standardized questionnaire was used in a two-year follow-up study to test the effectiveness of non-regulatory recommendations to improve indoor air quality of 103 ice arenas in Finland. In addition, the performance of a state-of-the-art emission control technology (ECT) on propane-fueled resurfacers was evaluated by measuring the one-week average nitrogen dioxide (NO₂) concentration in a small sample of arenas. The number of retrofitted ECT on propane-fueled resurfacers increased from 6 to 37 (8% to 37% of ice arenas) and the number of electric resurfacers from 7 to 9 (both 9% of arenas) in 1994–1996. At the same time, the prevalence of inadequate ventilation increased among the most susceptible small arenas (volume <30 000 m³) from 11 (31%) to 19 (38%). Combustion-powered resurfacers (88%) and inadequate ventilation (24%) were prevalent also among the 17 new arenas built in 1994–1996. ECT resurfacers significantly decreased the mean indoor NO₂ concentration of eleven arenas from 650 μg/m³ to 147 μg/m³. Thus, retrofitting resurfacers with ECT seems to be a feasible mitigation option to improve indoor air quality in ice arenas, but the ultimate solution is an electric ice resurfacer. Non-regulatory recommendations seem to be partially effective in abatement against the air quality problems, but additional regulatory measures are needed for full compliance in all arenas.     

Nutritional and related experiments on laboratory maintenance of three species of symbiont-bearing,large foraminifera

Factors were examined that affect survival and growth of two common species of large foraminifera from the Red Sea,Amphisorus hemprichii Ehrenberg andAmphistegina lobifera Larsen, 1976. The former is host for dinoflagellate and the latter for diatom zooxanthellae. Experimental conditions were modeled on conditions at 25 m during spring at Wadi Taba, Gulf of Elat, Israel, the season and site where the experimental organisms were collected between 1983 and 1988. The two species responded quite differently in nutritional experiments.A. hemprichii grew, on average, 0.270 mm in diameter in 3 mo on a diet ofNitzschia subcommunis Hustedt,Chlorella sp. (clone AT) orCylindrotheca closterium Rabenhorst isolated from their native habitat. Unfed controls did not grow. In contrast, unfed populations ofA. lobifera grew as well or better than those that were fed unialgal diets. Growth of both species was enhanced on particular mixed algal diets. Both species required photosynthetically active symbionts. Even when fed weekly and supplied with nutrients, neither species survived in the dark. All individuals ofA. hemprichii died after 8 wk incubation in the dark;A. lobifera survived longer, but all were dead by 13 wk. The highest growth rate ofA. hemprichii (0.037 mm wk^–1) was obtained when they were fed, the medium was enriched, and the medium was changed weekly. All other conditions being the same, growth rate dropped to 0.009 mm wk^–1 when the medium was changed every 3 wk. In contrast,A. lobifera grew fastest when the medium was changed every 3 wk. Food or enrichment with nitrate or phosphate did not stimulate growth (0.03 mm wk^–1) over that of the controls. Specimens ofMarginopora kudakajimensis Gudmundsson from Japan, another dinoflagellate-bearing species, were also tested. They grew best (0.02 mm wk^–1) when cultured in light, in media enriched with nitrate and phosphate changed weekly, and fed. All three species withdrew nitrate and phosphate from the medium in chemostat experiments.