An elemental rationing technique for assessing concentration data from a complex water system

Water samples have been collected at the surface and bottom layers at 51 locations throughout Chesapeake Bay. The suspended particulate and dissolved fractions of these samples have been analyzed for Cd, Ce, Co, Cu, Fe, Mn, Mo, Ni, Pb, Sc, Sn, Th, U, and Zn using neutron activation analysis and atomic absorption spectrometry. Special chemical procedures were used to preconcentrate the elements of interest in the dissolved samples and separate them from the salt water matrix. The elemental concentrations observed in the dissolved samples were evaluated by direct comparison to those found in coastal seawater; however, the elemental concentrations in the particulate samples (mass per volume of water) were strongly influenced by the total amount of particulate material suspended in the water at time of collection. A double normalization procedure was used to calculate crustal enrichment factors for each sample, and these enrichment factors provided both a means to observe sample-to-sample variations, and also allowed a crude comparison with the natural levels occurring in the earth's crust.     

Preparation of size-selected fibers and fibrous aerosols for biological experiments

A size-selective procedure was developed for the preparation of fiber fractions of uniform size of chrysotile, crocidolite, amosite, and glass. The raw material was first ground to a suitable fineness, then suspended in liquids by ultrasonic agitation and separated by fiber diameter by means of slow sedimentation. The fractionation by fiber length was done by a vibrating sieve method. Fibrous aerosols of different size distributions could be prepared by using a vibrating bed aerosol generator.     

Fertility and air pollution: Some empirical findings

This paper attempts to explain regional differences in fertility rates in the standard metropolitan statistical areas of the United States through socioeconomic factors and air pollution. An important feature of this study is that it uses the most recent data pertaining to a homogeneous sample of observations within a country rather than using data for different countries. Statistical results suggest that given other factors, fertility and the level of air pollution have an inverse relationship. This quantitative effect is statistically significant but the absolute impact is rather low. Our results also suggest that an increase in the level of income, relative education of females, temperature, and the availability of physicians would in the long run reduce fertility rates in the urban areas of the United States.     

Transport of particulate matter in natural waters — modelling and in situ-measurements

The significant processes controlling the fate of particulates are convection an dispersion on one hand, and sedimentation on the other hand. Due to inteparticulated reactions, larger aggregates can be formed from smaller units thus changing the sedimentation characteristics. These phenomena are summarized in a mathematical model whereby hydrodynamic effects as well as the control mechanisms of the dissolved phase are included. A relationship was derived on the basis of energy considerations leading to the formulation of a critical sedimentation velocity of the suspensa, which determines the transport capacity of the flowing system. The sedimentation term is calculated from the above discussed transport capacity, hydro-dynamic parameters and suspending media properties. Aggregation effects are taken into account as an increase of sedimentation velocities of the particles. The equations are solved in a particular computational routine such that the horizontal distribution of suspended solids in a natural system can be describe as function of the above discussed phenomena. The model was tested with in situ-measurements. It was found that the observed processes are described satisfactorily by this model.     

Health effects of oxidants

Oxidants of significance to human health include ozone, nitrogen dioxide, and peroxyacetylnitrate. All of these compounds are involved in complex photochemical reactions which makes quantification and prediction of their individual health effects difficult. Ozone causes trauma to lung tissues and interferes with enzyme systems in the lungs and other tissues causing a broad range of symptoms. Measurable health impacts can occur at concentrations as low as 390 μg/m³. Acute effects of ozone exposure are reversible at normal urban concentrations (80–120 μg/m³). A special problem of concern, however, is increased susceptibility to infectious diseases contracted through the lungs. Nitrogen dioxide also causes trauma to lung tissues and interferes with enzyme systems. Measurable impacts can occur at concentrations as low as 100 μg/m³, but recovery is rapid and it is not known whether repeated exposures at this level have cumulative effects or predispose the lungs to permanent damage. Chronic exposure of laboratory animals to higher nitrogen dioxide levels can cause emphysema-like conditions and reduction in resistance to respiratory infection. Epidemiological studies of children in houses with gas stoves confirm the finding of reduced resistance to respiratory infection. The U.S. EPA estimates that health effects may occur in young children exposed to concentrations in excess of 280 to 560 μg/m³ one-hour average. These concentrations occur routinely in houses having gas stoves. Peroxyacetylnitrate is a powerful eye irritant in photochemical smog. Other health effects are similar to those of ozone, but less important because of the relatively low concentrations of this pollutant compared to other oxidants.     

An appraisal of emissions control requirements in the California South Coast Air Basin

The purpose of this study is to evaluate the effect of reductions of reactive organic gases (ROG) and NO_x emissions on short-term O₃ and NO₂ concentrations and annual average NO₂ concentrations in the California South Coast Air Basin. Short-term air quality predictions were obtained by applying the Systems Applications Airshed Model to summer O₃ and autumn NO₂ episodes. Effects of emission controls on annual NO₂ concentrations were estimated using CDM and a new parcel tracking model NOXTRAK. Results for the summer O₃ episode indicate that ROG emission reduction in an effective means for reducing peak O₃ concentrations. NO_x emission reduction imposed in addition to ROG emission reductions are counterproductive in reducing peak O₃ concentrations. The modeling results also suggest that attainment of the 1-h federal O₃ standard requires ROG emission reductions on the order of 80% from 1987 levels. Results for the autumn NO₂ episode indicate that NO_x emission reductions approximating those recommended in a proposed Air Quality Management Plan (about 22%) will result in only small (about 5%) reductions in the peak NO₂ concentrations. ROG emission reduction may be more effective than NO_x emission reduction in reducing the peak NO₂ concentration. For the episode studied, a reduction of 36% in ROG emissions is estimated to result in a reduction in peak NO₂ concentrations commensurate with that required to attain the 1-h state NO₂ standard. Model calculations also indicate that the federal NO₂ standard may not be meet by 1987 at one or two stations, but may blosely approached.     

A study on the arsenic concentration in groundwater of a coastal aquifer in south-east India: an integrated approach

The occurrence of arsenic in drinking water and its detrimental effects have drawn much attention in recent years. Several studies have been conducted in the deltaic plains of River Ganga, NE part of the India, and in other countries, but no systematic study was conducted in South India on occurrence of arsenic in groundwater. The main aim of this study is to determine the level of arsenic in groundwater and to understand the relation with other geochemical parameters of groundwater in the south-eastern coastal aquifer at Kalpakkam region, India. This region is represented by three different lithologies, viz. charnockites, flood plain alluvium and marine alluvium. Twenty-nine representative samples of groundwater were collected and analysed for major ions, metals and isotopes such as ²H and ¹⁸O. In addition, geophysical method was also attempted to understand the subsurface condition. The spatial variation in arsenic (As) indicates that higher concentration was observed around the landfill sites and irrigated regions, which was supported by geochemical, statistical and isotopic inferences. The variation in the As with depth, lithology and sources has been clearly brought out. Though the values of As does not exceed the drinking water permissible limit (10 mg/l), it has reached a near permissible level of 8.7 ppb. Hence, it is essential to understand the geochemical behaviour of As for a proper future management of the water resource in the study area.     

Greening flood protection through knowledge processes: lessons from the Markermeer dikes project in the Netherlands

Greening flood protection (GFP) is increasingly recognized as an adaptive and flexible approach to water management that is well suited to addressing uncertain futures associated with climate change. In the last decade, GFP knowledge and policies have developed rapidly, but implementation has been less successful and has run into numerous barriers. In this paper, we address the challenge of realizing green flood protection goals by specifically considering knowledge in the decision-making of a Dutch flood protection project in Lake Markermeer. In this project, an ecological knowledge arrangement and a traditional flood protection knowledge arrangement are compared and their interactions analysed. The analysis provides insight into the specific difficulties of implementing GFP measures and identifies ways to realize GFP goals. The primary challenge is twofold: First, a self-reinforcing cycle of knowledge production and decision-making in the flood protection domain inhibits the introduction of innovative and multifunctional approaches such as GFP; second, the distribution of power is severely unbalanced in terms of ecological enhancement and flood protection, favouring the latter. Implementation of GFP requires structural change and the integration of ecological and flood protection knowledge and policy. Potentially rewarding routes towards this integration are the exploration of shared interests in GFP and the creation of mutual dependency between knowledge arrangements. The case study and the insights it provides show that GFP is far from mainstream practice and that implementation requires serious effort and courage to break with historical practices.     

Parxit,the United States,and the world

<正>1.Introduction And now we have Parxit.On 1 June 2017,President Trump issued the highly unpopular announcement that the United States will withdraw from the 2015 Paris Agreement on Climate Change.In this brief piece,I will try to explain the reasons for this nearly unprecedented act of foreign policy folly(Ronald Reagan did pull out of the Law of the Sea     

Eco-design practices towards sustainable supply chain management: interpretive structural modelling (ISM) approach

Due to increasing emphasis on sustainable practices, many organisations have attempted to leverage their supply chain performance towards balancing triple bottom line dimensions (economic, environmental and social perspectives). This paper, therefore, determines the priorities of sustainable supply chain management focusing on eco-design. Interpretive structural modelling (ISM) and Matriced’ Impacts Croise’s Multiplication Appliquée a UN Classement (MIMAC) are used to identify the hierarchical structure of the relationships among eco-design dimensions, and to analyse characteristics power of each dimension on supporting eco-design practices. The relationships and characteristics power of each dimension are used to determine indicators that are effective in enhancement of eco-design practice, evaluated through sustainable supply chain performance. Results indicate that product deployment is an important approach for improving eco-design practice towards sustainable supply chain management. This emphasises the purpose and impact of eco-design on sequential supply chain activities at deployment phase. Further research is required to make an overall assessment of eco-design practices across range of manufacturing industries, given the current research is based on inputs from a limited number of experts of selected organisations.