基于有机物指纹图谱技术的长江南京段水中有机磷溯源研究

长江水环境污染物识别和溯源分析是保护长江水生态环境的前提。于2021年11月26—27日对长江南京段有机磷进行溯源调查,采用有机物指纹图谱识别技术对9个干流监测点位和7个临近入河排口监测点位之间以有机磷为代表的有机污染物的耦合关联性进行研究,筛查重点潜在污染水域及可能来源。研究结果表明,应用指纹图谱技术共识别出25类有机污染物,其中干流XC-02点位有机磷等有机污染物输入明显,主要受临近陆域污水处理厂、制药企业、石化企业及表面加工企业等的工业废水排放影响;干流XC-07点位有机磷离子峰强度升高,受上游传输与陆域入河排口XA-07点位共同影响。研究为河流有机污染物溯源提出了指纹图谱解析方法思路并得以应用,为水环境有机污染物管控提供技术支撑和决策依据。     

六种表面活性剂对斑马鱼胚胎发育的毒性效应

为评价六种常见农药表面活性剂对水生生物的风险,采用斑马鱼胚胎发育技术,研究其对斑马鱼胚胎的致死效应和致畸效应.结果表明,NP-10、OP-10、农乳700、农乳602、农乳1602、宁乳33对斑马鱼胚胎的致死中浓度分别为16.44、21.13、55.86、8446、109.90、120.08 mg·L-1,其中NP-10对斑马鱼胚胎急性毒性最大,宁乳33毒性最低;随着染毒剂量的增加,斑马鱼胚胎孵化率逐渐降低,致畸率逐渐提高,六种表面活性剂显示出相似的趋势,处理浓度与胚胎孵化率(致畸率)之间存在剂量-效应关系;NP-10、OP-10、农乳700处理组均诱导斑马鱼胚胎出现躯干侧翻、游囊关闭、躯干弯曲症状;农乳602、农乳1602、宁乳33处理组出现躯干侧翻、游囊关闭症状.     

Degradation mechanism of ammonia nitrogen synergistic with bromate under UV or UV/TiO2

Environmental Science and Pollution Research - Bromate (BrO3?) and ammonia nitrogen (NH4+) are both typical environmental pollutants: BrO3? has been categorized as one of the Group 2B...     

A discussion to promote global sustainability techniques for motivating plastic waste to minimize carbon footprints

This paper emphasizes the significant challenges facing the sustainable environment, including managing and handling plastic waste and reducing carbon footprints. To tackle these challenges, it is essential to identify people's awareness levels of waste handling techniques and their pro-environmental behaviors. The study focuses on Guwahati, one of the most important cities in Northeast India, which generates increasing plastic waste daily. The paper aims to identify the factors contributing to the reduction of carbon footprints resulting from plastic waste management activities. The data collected from 1326 respondents was analyzed using factor analysis, and the reliability of the dataset was confirmed using Cronbach's alpha (0.84 for the awareness level of waste management techniques and 0.780 for the prevalent mode of plastic waste management techniques). KMO (0.796), Bartlett's test of sphericity (p < 0.001), and determinant score (0.019) were used to assess the data adequacy and factorability of the dataset, and the results were found to be satisfactory. Principal component analysis, exploratory factor analysis, and varimax orthogonal rotation method were used to identify high-loaded factors by reducing the number of variables. The results showed that two highly loaded components, namely awareness level of waste management techniques (AWMT) and prevalent mode of plastic waste management techniques (PWMT), explained 27.53% and 24.34% of the total variance, respectively, with eigenvalues of 3.35 and 2.88. The regression model confirmed the statistical significance of these factors (p < 0.001) and their relationship with the dependent variable, greenhouse reduction (GHGR). The study proposes that minimizing carbon footprints in the environment can be achieved by focusing on a limited number of controllable factors such as AWMT and PWMT. This study provides valuable insights to the authorities in controlling waste generation and achieving a pollution-free environment.     

跨海桥梁大尺度基础波浪荷载计算方法对比研究∗

波浪荷载是跨海桥梁基础的主要环境荷载之一。为了探究大尺度桥梁基础上各类波浪荷载计算方法的差异,分别采用了当前研究中较常用的Morison方程、规范、基于边界元法的三维绕射理论和基于Navier‐Stokes方程的CFD方法计算了某跨海桥梁大尺度圆端型沉井基础在规则波作用下的波浪荷载,研究了不同结构相对尺度对各方法计算结果的影响,并重点比较分析了后两种数值方法的三维流场分布,三维压力场分布,以及非线性二阶力效应的影响。结果表明,在结构相对尺度为0.2左右时,上述方法的计算结果接近,随着结构相对尺度的增加,边界元与CFD方法依然吻合较好,规范方法给出了较为保守的波浪荷载,Morison方程可能高估了波浪拖曳力的贡献。边界元与CFD方法计算得到的速度场与压力场结果整体趋势一致,但在沉井前端自由液面与物面,沉井侧面的波谷等局部区域会产生明显差异,这可能是由于二者考虑绕射效应与黏性效应的理论不同。在边界元方法中考虑非线性二阶力效应会使其波浪荷载结果小幅度增大,并在频谱中增加差频二阶力及和频二阶力成分,考虑非线性二阶力效应后,边界元与CFD方法的频谱曲线更加吻合,边界元方法能更精确地计算波浪荷载。边界元与CFD方法均能合理地给出大尺度结构物波浪荷载结果,研究结论可为跨海桥梁工程波浪荷载的准确计算提供了依据。     

岩石单轴压缩蠕变损伤本构模型

准确预测岩石蠕变行为对岩石力学与工程的研究具有非常重要的意义。首先对岩石蠕变机理及典型蠕变曲线进行了分析,其次通过在经典岩石蠕变模型如J体模型的基础上引入损伤理论及Kachanov损伤演化定律,进而建立了一个新的岩石蠕变损伤本构模型。第三,对模型参数的确定方法进行了详细的研究。最后,引用其他学者所开展的不同轴压下岩石单轴压缩蠕变试验对该模型的合理性进行了验证。可以发现本文所提出的模型不仅能够很好地预测岩石的稳定蠕变阶段,而且还能预测经典模型所不能反映的岩石加速蠕变变形。结果表明损伤理论能够很好地反映岩石的蠕变破坏机理,为了能够准确模拟岩石蠕变变形全过程,在经典的J体模型中引入损伤因子是很有必要的。     

渤海直排海污染源排放特征及管理对策研究

本文根据2011－2020年渤海直排海污染源监测数据,分析了渤海直排海污染源污染物排放特征及变化趋势,总结了2017年以来特别是渤海综合治理攻坚战实施后直排海污染源治理成效,并提出相应的管理对策。研究结果表明:2011－2020年,渤海直排海污染源污水排放量与黄海、东海和南海海区相比一直处于低位,化学需氧量、氨氮、总磷等污染物排放量总体呈先增加后减少的趋势;从2018年渤海综合治理攻坚战实施开始,直排海污染源入海污水总量呈明显上升趋势,但化学需氧量、总磷、总氮等主要污染物总量和浓度比明显下降,直排海污染源达标率呈逐年上升趋势;空间分布上,山东省、辽宁省属于直排海污染源排放量和排放强度高的省份;时间分布上,2018－2020年第四季度化学需氧量、总氮、总磷、氨氮等主要污染物排放量呈明显上升趋势。结合渤海直排海污染源排放特征,建议应健全渤海直排海污染源管控体系,分类推进渤海直排海污染源精准整治,提升渤海直排海污染源监测能力,为深入开展渤海直排海污染源污染治理提供支撑。     

地铁运行引起建筑物振动的三维有限元分析

随着城市轨道交通的迅猛发展,大量建筑设施不可避免地受到周边铁路或地铁列车振动的影响。基于并行计算集群平台,建立了车辆-轨道-高架桥-基础-地基-建筑物耦合的大型三维有限元分析模型,得到了不同工况下列车运行引起地表及临近建筑结构的振动特征。主要结论如下:不同高度的建筑物在同一楼层的振级相差极小;随着车速的提高,建筑物各楼层的振级均呈逐渐增大趋势;此外,各楼层的振级随建筑物距高架桥距离的增大而逐渐减小。一般高度的建筑物各楼层的振级基本沿高度单调增加,顶层振级最大,而高层建筑物却有明显的拐点,在中间某层出现最大振级。建筑物各层楼板的竖直向振动峰值速度远大于水平向振动峰值。     

微塑料对双齿围沙蚕生理代谢的影响研究

为探讨微塑料对双齿围沙蚕生理代谢的影响,本文研究了聚丙烯(PP)、聚酰胺(PA)和聚氯乙烯(PVC)3种微塑料在不同浓度(0.1％、1％和5％)和暴露时间下对双齿围沙蚕体内过氧化氢酶(CAT)、乙酰胆碱酯酶(AchE)活性以及代谢指标排氨率和呼吸速率的影响.结果表明,随微塑料浓度的升高,双齿围沙蚕体内CAT活性显著提升,5％浓度下双齿围沙蚕体内CAT活性最高;PVC对双齿围沙蚕体内AchE活性表现为低浓度(0.1％)抑制、高浓度(5％)促进的作用;PP和PA在不同浓度下对双齿围沙蚕体内AchE酶活性均表现为促进作用;随着微塑料浓度的升高,双齿围沙蚕的排氨率和呼吸速率显著升高(P<0.05).综上,微塑料在高浓度条件下,在一定时间内可以对双齿围沙蚕产生氧化胁迫作用,并一定程度上影响其排氨率和呼吸速率.     

Catalytic fast pyrolysis of walnut shell for alkylphenols production with nitrogen-doped activated carbon catalyst

• N-doped activated carbon was prepared for catalytic pyrolysis of walnut shell. • Alkylphenols were selectively produced from catalytic pyrolysis process. • The alkylphenols yield increased by 8.5 times under the optimal conditions. • Formation mechanism of alkylphenols was proposed. Alkylphenols are a group of valuable phenolic compounds that can be derived from lignocellulosic biomass. In this study, three activated carbons (ACs) were prepared for catalytic fast pyrolysis (CFP) of walnut shell to produce alkylphenols, including nitrogen-doped walnut shell-derived activated carbon (N/WSAC), nitrogen-doped rice husk-derived activated carbon (N/RHAC) and walnut shell-derived activated carbon (WSAC). Pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) experiments were carried out to reveal the influences of AC type, pyrolytic temperature, and AC-to-walnut shell (AC-to-WS) ratio on the product distributions. Results showed that with nitrogen doping, the N/WSAC possessed stronger capability than WSAC toward the alkylphenols production, and moreover, the N/WSAC also exhibited better effects than N/RHAC to prepare alkylphenols. Under the catalysis of N/WSAC, yields of alkylphenols were significantly increased, especially phenol, cresol and 4-ethylphenol. As the increase of pyrolytic temperature, the alkylphenols yield first increased and then decreased, while high selectivity could be obtained at low pyrolytic temperatures. Such a trend was also observed as the AC-to-WS ratio continuously increased. The alkylphenols production achieved a maximal yield of 44.19 mg/g with the corresponding selectivity of 34.7% at the pyrolytic temperature of 400°C and AC-to-WS ratio of 3, compared with those of only 4.67 mg/g and 6.1% without catalyst. In addition, the possible formation mechanism of alkylphenols was also proposed with the catalysis of N/WSAC.