Evidential role of municipal solid waste and liquid effluent on environment and public health

Cities in Bangladesh produce large amounts of solid waste (SW) through various human activities which severely pollutes our native environment. As a result, SW pollutes the three basic environmental elements (air, water, and soil) by increasing pathogenic microbial load, which might be hazardous to public health directly or indirectly. In this study, we conducted 30 samples (i.e., soil, water, and air) collected from areas where municipal solid wastes are dumped (Tangail Sadar Upazila, Bangladesh). All the samples were analyzed to assess bacteriological quality for presumptive viable and coliform count using different agar media. We performed serial dilution 10⁻³–10⁻¹⁰ times for soil and water samples, and the diluted samples were spread on Mac-Conkey agar and nutrient agar plates. For the air sample, the sterile media containing petri-dish was placed adjacent to the dumpsite of the municipal waste and kept for an hour. Then all the samples were incubated at 37°C overnight for total viable count (TVC) and total coliform count (TCC). Biochemical tests and PCR were performed for the identification of these microorganisms. The antibiogram study was performed to reveal their (identified bacteria) susceptibility against clinically used antibiotics according to the standard disk diffusion technique. The highest bacterial loads were found in the air: TVC 3.273 × 10³ and TCC 1.059 × 10³ CFU/plate; tube-well water: TVC 8.609 × 10³, and TCC 8.317 × 10³ CFU/mL; in surface water: TVC 6.24 × 10¹³ CFU/mL and TCC 2.2 × 10¹² CFU/mL; in soil: TVC 2.88 × 10¹¹ and TCC 1.02 × 10¹¹ CFU/g, respectively. Microbes from SW can be transmitted through air, dust particles, or flies, and here we found an average of 1120 microbes spread over 63.61 cm² area per hour. Eight bacterial isolates (Pseudomonas spp., Klebsiella spp., E. coli, Proteus spp., V. cholera, Salmonella spp., Shigella spp., and Vibrio spp.) were identified by the biochemical test. Among them, E. coli and Shigella spp. were further ensured by PCR targeting bfpA and ipaH genes. Antibiotic susceptibility test results showed that E. coli isolates were highly resistant to erythromycin (80%); Shigella spp. were resistant to nalidixic acid (90%), whereas Salmonella spp. was found resistant to kanamycin (90%). Vibrio spp. were also resistant to azithromycin (80%) and erythromycin (80%), which should be a great concern for us. A semi-structured survey revealed that 63% of respondents suffered from different clinical conditions (intestinal diseases) due to SW pollution. So, steps should be taken to improve the proper management and disposal of solid waste and liquid effluent to save our environment and public health.     

One-dimensional numerical modelling of dam-break waves over movable beds: application to experimental and field cases

This paper reports a numerical study on dam-break waves over movable beds. A one-dimensional (1-D) model is built upon the Saint-Venant equations for shallow water waves, the Exner equation of sediment mass conservation and a spatial lag equation for non-equilibrium sediment transport. The set of governing equations is solved using an explicit finite difference scheme. The model is tested in various idealized experimental cases, with fairly good agreement between the numerical predictions and measurements. Discrepancies are observed at the earlier stage of the dam-break wave and around the dam location due to no vertical velocity component being taken into account. Sensitivity tests confirm that the friction coefficient is an important parameter for the evaluation of sediment transport processes operating during a dam-break wave. The influence of the non-equilibrium adaptation length (or the lag distance) is negligible on the wavefront celerity and weak on the free surface and bed profiles, which indicates that one may ignore the spatial lag effect in dam-break wave studies. Finally, the simulation of the Lake Ha!Ha! dyke-break flood event shows that the model can provide relevant results if a convenient formula for computing the sediment transport capacity and an appropriate median grain diameter of riverbed material are selected.     

Research trends in biodiversity loss: a bibliometric analysis

Environmental Science and Pollution Research - Although increased attempts to preserve biodiversity ecosystems have been widely publicized, bibliometric research of biodiversity loss remains...     

Sago pith waste ash as a potential raw material for ceramic and geopolymer fabrication

Journal of Material Cycles and Waste Management - This study focuses on the potential usage of sago pith waste ash (SPWA) obtained from sago pith waste (SPW) calcined from 500 to...     

On the successful use of a simplified model to simulate the succession of toxic cyanobacteria in a hypereutrophic reservoir with a highly fluctuating water level

Many freshwater bodies worldwide that suffer from harmful algal blooms would benefit for their management from a simple ecological model that requires few field data, e.g. for early warning systems. Beyond a certain degree, adding processes to ecological models can reduce model predictive capabilities. In this work, we assess whether a simple ecological model without nutrients is able to describe the succession of cyanobacterial blooms of different species in a hypereutrophic reservoir and help understand the factors that determine these blooms. In our study site, Karaoun Reservoir, Lebanon, cyanobacteria Aphanizomenon ovalisporum and Microcystis aeruginosa alternatively bloom. A simple configuration of the model DYRESM-CAEDYM was used; both cyanobacteria were simulated, with constant vertical migration velocity for A. ovalisporum, with vertical migration velocity dependent on light for M. aeruginosa and with growth limited by light and temperature and not by nutrients for both species. The model was calibrated on two successive years with contrasted bloom patterns and high variations in water level. It was able to reproduce the measurements; it showed a good performance for the water level (root-mean-square error (RMSE) lower than 1 m, annual variation of 25 m), water temperature profiles (RMSE of 0.22–1.41 °C, range 13–28 °C) and cyanobacteria biomass (RMSE of 1–57 μg Chl a L^?1, range 0–206 μg Chl a L^?1). The model also helped understand the succession of blooms in both years. The model results suggest that the higher growth rate of M. aeruginosa during favourable temperature and light conditions allowed it to outgrow A. ovalisporum. Our results show that simple model configurations can be sufficient not only for theoretical works when few major processes can be identified but also for operational applications. This approach could be transposed on other hypereutrophic lakes and reservoirs to describe the competition between dominant phytoplankton species, contribute to early warning systems or be used for management scenarios.     

Impact and effectiveness of Bio-Coke conversion from biomass waste as alternative source of coal coke in Southeast Asia

Journal of Material Cycles and Waste Management - Growing concern over fossil fuel depletion and the environmental impact of greenhouse gases have driven the demand for solid biofuel energy as an...     

Preparation of Cellulose Nanocrystals Using an Ionic Liquid

In this paper cellulose nanocrystals were prepared by treating microcrystalline cellulose with 1-butyl-3-methylimidazolium hydrogen sulphate ionic liquid. Cellulose nanocrystals, after separation from ionic liquid, were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), Field emission scanning electron microscopy (FESEM) Transmission Electron Microscope (TEM) and Thermogravimetric analysis. XRD results showed no changes in type of cellulose after the treatment with ionic liquid, however, high crystallinity index was observed in the ionic liquid treated sample. Cellulose nanocrystals, having length around 50–300 nm and diameter around 14–22 nm were observed in the ionic liquid treated sample under FESEM and TEM, and similar patterns of peaks as that of microcrystalline cellulose were observed for cellulose nanocrystals in the FTIR spectra. The thermal stability of the cellulose nanocrystals was measured low as compare to microcrystalline cellulose.     

Determination of elemental carbon in lake sediments using a thermal–optical transmittance (TOT) method

An improved chemical oxidation pretreatment method has been developed for the determination of elemental carbon (EC) [also known as black carbon (BC) or soot] in lake sediments, using a thermal–optical transmittance (TOT) carbon analyzer. The method employs six steps: (1) removal of carbonates by treatment with HCl; (2) removal of silicates by treatment with HF + HCl; (3) removal of any remaining carbonates by treatment with HCl; (4) removal of humic acids by treatment with NaOH; and (5) oxidation of kerogens by K₂Cr₂O₇ + H₂SO₄. A critical step of zinc chloride treatment was added; this apparently changes EC's morphology and enhances retention on quartz fiber filter, resulting in several-fold increased chemical yield. EC was determined using the TOT method with modified combustion timings. Carbon black (acetylene) and four NIST standard reference materials (SRMs) were used for quality control, and to assess the precision of the analysis. The EC recoveries from 18 carbon black samples varied from 90 to 111%, with a mean value of 99 ± 6%. The high EC recoveries confirmed the validity of the method. Char reference materials (i.e. chestnut wood and grass char) were used to determine potential contribution to EC in our measurements. The char references containing about 700 mg total organic carbon (OC) contributed ～1.5% EC. The measured EC values from four NIST standards were 17.0 ± 0.6, 24.2 ± 3.2, 5.6, and 1.9 ± 0.1 mg g_dw^?1 for SRM-1648, SRM-1649a, SRM-1941b and SRM-8704, respectively. These values in SRMs were in agreement (<±4%) with the previously reported values. The method was applied to determine the EC in sediment cores from an urban lake and a remote mountain lake in the Northeastern United States. The EC concentrations in two lakes mimic the model EC emissions from the industrial revolution in United States.     

Inherent risk assessment—A new concept to evaluate risk in preliminary design stage

Quantitative Risk Assessment (QRA) has been a very popular and useful methodology which is widely accepted by the industry over the past few decades. QRA is typically carried out at a stage where complete plant has been designed and sited. At that time, the opportunity to include inherent safety design features is limited and may incur higher cost. This paper proposes a new concept to evaluate risk inherent to a process owing to the chemical it uses and the process conditions. The risk assessment tool is integrated with process design simulator (HYSYS) to provide necessary process data as early as the initial design stages, where modifications based on inherent safety principles can still be incorporated to enhance the process safety of the plant. The risk assessment tool consists of two components which calculate the probability and the consequences relating to possible risk due to major accidents. A case study on the potential explosion due to the release of flammable material demonstrates that the tool is capable to identify potential high risk of process streams. Further improvement of the process design is possible by applying inherent safety principles to make the process under consideration inherently safer. Since this tool is fully integrated with HYSYS, re-evaluation of the inherent risk takes very little time and effort. The new tool addresses the lack of systematic methodology and technology, which is one of the barriers to designing inherently safer plants.     

Evaluation of chlordimeform and degradation products for mutagenic and DNA‐damaging activity in salmonella typhimurium and escherichia coli

Abstract

The mutagenic activity of chlordimeform and two of its breakdown products, 4‐chloro‐o‐toludine and 4‐chloro‐N‐formyl‐o‐toluidine were determined with five histidine dependent strains of Salmonella typhimurium (TA1535, TA1537, TA1538, TA98, TA100) and five tryptophan dependent strains of E. coli WP₂. (WP₂, WP₂uvrA, WP67, CM611, CM571) with and without rat liver microsomal enzymes. 4‐chloro‐o‐toluidine increased the number of the reversions of the S. typhimurium strain TA1535 more than two fold over spontaneous at the concentration of 400 μg/plate.

The results of the DNA repair tests in the Salmonella TA1538/TA1978 and E. coli multirepair deficient systems showed that both breakdown products were active in inducing damage not repaired in at least one repair deficient strain while chlordimeform itself was inactive.