Extraction timing and economic incentives for geothermal reservoir management

This article considers the best extraction program for a hot water geothermal reservoir with emphasis on the optimal time to begin extraction. Using a production function relating the rate of extraction to the quality of produced energy, an operational model is presented that gives the best time to begin production, the optimal pumping rate and the best planning horizon. Also investigated is the effect of economic parameters and incentives on these decision variables. This paper studies some means by which regulatory agencies can influence the timing and rate of exploitation of geothermal energy by manipulating economic incentives, and provides information for both public and private decision making in the management of this resource.     

Potential of 2, 4‐dichlorophenoxyacetic acid conjugates as promutagens in the salmonella/microsome mutagenicity test

Abstract

Hepatic S9 preparations from Aroclor 1254 induced rats and 3‐methylcholanthrene induced woodchucks were used to investigate, in vitro, the mutagenic potential of five amino acid conjugates of 2, 4‐Dichlorophenoxyacetic acid (alanine, aspartic acid, leucine, methionine and tryptophan). Five strains of Salmonella typhimurium (TA97, TA98, TA100, TA1535, TA1538) were utilized for this purpose. Dose‐response effects producing a two‐fold increase of revertants over spontaneous levels were not observed with either S9 preparation indicating that the amino acid conjugates are not promutagens in these assays.     

Spatial variation of salts in a Gyanpur canal command area

This study was aimed to establish background and reference values of total heavy metals in soils from a representative area of Albania (Tirana). Thirty-eight soil samples collected from genetic horizons of major soil types of Tirana were analyzed for important physicochemical properties by standard methods and for total contents of Cd, Cr, Ni, Pb, Zn, and Cu by atomic absorption spectrometer, after extraction with aqua regia. The results showed that the total contents of Cd, Cr, Ni, Pb, Zn, and Cu in surface horizons varied widely with respective mean values of 0.3 (??0.6), 174.2 (??63.7), 305.9 (??133.0), 19.7 (??12.4), 95.5 (??26.3), and 42.7 (??6.8) mg/kg. The highest metal contents were found in two soils developed in limestone. The depth distribution of metals showed a tendency for accumulation of Cd and Pb in the surface horizons of three soils, suggesting that these metals partially come from anthropogenic inputs. Correlation analysis indicated that the metal contents of soils were controlled by soil properties, including pH, CaCO₃, clay, organic matter, cation exchange capacity, and Fe oxides. The background values (given as the 90th percentile) were much higher than those reported in the literature, showing that the levels of respective metals were naturally higher. The total metal contents of some soils were above background levels, suggesting metal pollution. The reference values for all the analyzed metals were quite consistent with those of the Dutch system. The proposed background and reference values can be used to evaluate the soil pollution with these elements.     

Selective sensing of mercury(II) using PVC-based membranes incorporating recently synthesized 1,3-alternate thiacalix[4]crown ionophore

The construction and electrodes characteristics of poly(vinylchloride) (PVC)-based polymeric membrane electrode (PME) and coated graphite electrode (CGE), incorporating 1,3-alternate thiacalix[4]crown as ionophore for estimation of Hg(II) ions, are reported here. The best potential response was observed for PME-1 having membrane composition of: ionophore (6.2 mg), PVC (100.0 mg), 2-nitrophenyl octyl ether (2-NPOE; 200.0 mg), and sodium tetraphenyl borate (NaTPB; 2.0 mg); for CGE-1 with the membrane composition: ionophore (3.5 mg), PVC (40.0 mg), 2-NPOE (80.0 mg), and NaTPB (2.0 mg). The electrodes exhibits Nernstian slope of 29.16 mV/decade with PME-1 and 30.39 mV/decade with CGE-1 for Hg(II) ions over wide concentration range, i.e., 1.0?×?10^?1 to 5.0?×?10^?6?M with PME-1 and 1.0?×?10^?1 to 5.0?×?10^?7?M with CGE-1. Lower detection limits were found to be 9.77?×?10^?6?M for PME-1 and 7.76?×?10^?7?M for CGE-1 with response time varying from 10 to 20 s. Also, these electrodes work within pH range of 2.0–6.0 for PME-1 and 1.5–6.5 for CGE-1. Overall, CGE-1 has been found to be better than PME-1. CGE-1 has been used as indicator electrode for the potentiometric titration of Hg(II) ions with EDTA as well as successfully applied for determination of Hg(II) content in wastewater, insecticide, dental amalgam, and ayurvedic medicines samples with very good performance (0.9974 correlation coefficient in the comparison against volumetric method).     

Membrane Fouling in Microfiltration of Sanitary Landfill Leachate for Removals of Colourand Solids

In this research,the treatability of solids from sanitary landfill leachate by microfiltration membrane was investigated and the fouling of the membrane was carefully studied.Continuous microfiltration process was carried out for 21 h in experimental system involved coagulation with Moringa oleifera followed by filtration using submerged hollow fibre microfiltration membrane (MFM).Coagulation with M.Oleifera,air diffusers and back flush technique were used for preventing or alleviating fouling of the membrane.The hollow fibre MFM showed high removals of 98%,91% and 99% for turbidity,colour and total suspended solids respectively.It was obtained at the beginning of the filtration.However,quality of the filtrate rapidly declined during the filtration process.Fouling was found to proceed according to the classical cake filtration model.Coagulation with M.Oleifera as well as the back-flush technique could not fully restore the deterioration occurred to the membrane.     

Synthesis and anti-microbial activity of hydroxylammonium ionic liquids

Eight hydroxylammonium-based room temperature ionic liquids (ILs) have been synthesized by acid-base neutralization of ethanolamines with organic acids. The ILs were characterized by infrared and nuclear magnetic resonance spectroscopies and elemental analysis. Their anti-microbial activities were determined using the well-diffusion method. All eight ILs were toxic to Staphylococcus aureus, while 2-hydroxyethylammonium lactate and 2-hydroxy-N-(2-hydroxyethyl)-N-methylethanaminium acetate showed high anti-microbial activity against a wide range of human pathogens.     

Synthesis and Characterization of Chitosan-Grafted-Poly(2-Hydroxyaniline) Microstructures for Water Decontamination

Chitosan as a biopolymer, biodegradable, safe, non-toxic and widely abundant in nature was grafted with poly(2-hydroxyaniline) (P2-HA) through aqueous chemical oxidative copolymerization using ammonium persulphate in acetic acid medium. The grafting conditions were studied by varying grafting parameters. The effect of oxidant, 2-hydroxyaniline (2-HA) and acetic acid concentrations on the rate of copolymerization was studied. The synthesized graft characterized using UV–Vis, FTIR, TGA, XRD, and scanning electron microscope and compared with chitosan and P2-HA. The grafting enhances the thermal properties of chitosan. The effect of temperature on the rate of grafting copolymerization reaction was studied. The apparent activation energy (Ea) of the copolymerization reaction found to be 21.1116 kJ/mol. Also, ΔH^* and ΔS^*, were calculated and found to 22.8630 kJ/mol and ?109.4290 J/mol K respectively. The mechanism of the grafting copolymerization reaction discussed. Chitosan, P2-HA and chitosan-graft-P2-HA used for the removal of Cr, Fe, Mn, Cu and Zn divalent ions from a contaminated water samples. The adsorption isotherm parameters are given.     

Genotoxicity of methyl parathion in short‐term bacterial test systems

Abstract

Genotoxicity of the insecticide methyl parathion was investigated in Salmonella typhimurium and Escherichia coli bacterial test systems for the detection of back mutations and DNA‐damage. Methyl parathion was mutagenic to S. typhimurium strain TA100 after activation with rat liver microsomal and cytosolic enzymes. In DNA repair tests, methyl parathion was effective in inducing damage to the S. typhimurium strain TA1538 which lack excision repair compared to the strain TA1978 which is proficient in excision repair mechanisms. Normal laboratory light conditions had no effect on the mutagenicity tests, however, exposure of methyl parathion in the petri dish containing the tester strain TA100 and rat liver microsomal and cytosolic enzymes reduced the mutagenic activity and increased the toxic effects of methyl parathion.     

Evaluation of Beta‐naphthoxyacetic Acid for Mutagenic Activity in the Salmonella/mammalian Microsome Assay

1,3‐β‐d‐Glucan derived from baker's yeast was chemically modified in two steps yielding crosslinked carboxymethyl glucan as the sodium salt (2). After cation exchange with hexadecyltrimethylammonium chloride, a hydrophobic adsorbent (3) was obtained which showed an excellent binding of the estrogenic mycotoxin zearalenone with a maximum adsorption of up to 183 mg/g. Compound 3 additionally showed a relatively high adsorption capacity for the trichothecene T‐2 toxin of at least 10 mg/g. Starting from 2, various derivatives were prepared by cation exchange using quaternary ammonium salts bearing substituents besides methyl from four to 18 carbon atoms. The adsorption of T‐2 toxin on these derivatives were compared with compound 3 leading to the conclusion that 3 is the best adsorbent of all investigated tetraalkylammonium‐modified derivatives of 2.