The variability and intrinsic remediation of a BTEX plume in anaerobic sulphate-rich groundwater

Data from long-term groundwater sampling, limited coring, and associated studies are synthesised to assess the variability and intrinsic remediation/natural attenuation of a dissolved hydrocarbon plume in sulphate-rich anaerobic groundwater. Fine vertical scale (0.25- and 0.5-m depth intervals) and horizontal plume-scale (>400 m) characteristics of the plume were mapped over a 5-year period from 1991 to 1996. The plume of dissolved BTEX (benzene, toluene, ethylbenzene, xylene) and other organic compounds originated from leakage of gasoline from a subsurface fuel storage tank. The plume was up to 420 m long, less than 50 m wide and 3 m thick. In the first few years of monitoring, BTEX concentrations near the point of leakage were in approximate equilibrium with non-aqueous phase liquid (NAPL) gasoline. NAPL composition of core material and long-term trends in ratios of BTEX concentrations in groundwater indicated significant depletion (water washing, volatilisation and possibly biodegradation) of benzene from residual NAPL after 1992. Large fluctuations in BTEX concentrations in individual boreholes were shown to be largely attributable to seasonal groundwater flow variations. A combination of temporal and spatial groundwater quality data was required to adequately assess the stationarity of plumes, so as to allow inference of intrinsic remediation. Contoured concentration data for the period 1991 to 1996 indicated that plumes of toluene and o-xylene were, at best, only partially steady state (pseudo-steady state) due to seasonal groundwater flow changes. From this analysis, it was inferred that significant remediation by natural biodegradation was occurring for BTEX component plumes such as toluene and o-xylene, but provided no conclusive evidence of benzene biodegradation. Issues associated with field quantification of intrinsic remediation from groundwater sampling are highlighted. Preferential intrinsic biodegradation of selected organic compounds within the BTEX plume was shown to be occurring, in parallel with sulphate reduction and bicarbonate production. Ratios of average hydrocarbon concentrations to benzene for the period 1991 to 1992 were used to estimate degradation rates (half-lives) at various distances along the plume. The estimates varied with distance, the narrowest range being, for toluene, 110 to 260 days. These estimates were comparable to rates determined previously from an in situ tracer test and from plume-scale modelling.     

Measurements of peroxyacyl nitrates (PANS) in Mexico City: implications for megacity air quality impacts on regional scales

Peroxyacyl nitrates (PANs) were measured using gas chromatography with electron capture detection (GC/ECD) in north central Mexico City during February–March of 1997. Peroxyacetyl nitrate (PAN) was observed to exceed 30 ppb during five days of the study, with peroxypropionyl nitrate (PPN) and peroxybutryl nitrate (PBN) reaching 6 and 1 ppb maximum, respectively. Levels of total PANs typically exceeded 10 ppb during the period of measurement and showed a very strong diurnal variation with PANs maximum during the early afternoon and falling to less than 0.1 ppb during the evening hours. These levels of PANs are the highest reported values in North America (and the world) for an urban center, since levels of approximately 30 ppb were reported during the late 1970s in the Los Angeles area (South Coast Air Basin, Tuazon et al., 1978). Hydrocarbon measurements indicate that the levels of olefins, specifically butenes are significant in Mexico City. A time series taken of source indicator hydrocarbons taken before and during a Mexican National Holiday with reduced automobile traffic clearly show that mobile sources of butenes are as important as liquefied petroleum gas. Observations of 10–40 ppb C methyl-t-butyl ether (MTBE) are consistent with MTBE/gasoline fuel usage as a source of isobutene and formaldehyde. Both these reactive species can lead to increased oxidant and PAN formation. The strong diurnal profiles of PANs are consistent with regional clearing of the Mexico City air basin on a daily basis. Estimates are given using a simple box model calculation for a number of key primary and secondary pollutant emissions from this megacity on an annual basis. These calculations indicate that megacities can be important sources of both primary and secondary pollutants, and that PANs produced in megacity environments are likely to contribute strongly to regional scale ozone and aerosol productions during long range transport.     

Ozone patterns for three metropolitan statistical areas in North Carolina, USA

As part of an effort by the state of North Carolina to develop a State Implementation Plan (SIP) for 1-h peak ozone control, a network of ozone stations was established to monitor surface ozone concentrations across the state. Between 19 and 23 ozone stations made continuous surface measurements between 1993 and 1995 surrounding three major metropolitan statistical areas (MSAs): Raleigh/Durham (RDU), Charlotte/Mecklenburg (CLT), and Greensboro/High Point/Winston-Salem (GSO). Statistical averages of the meteorological and ozone data were performed at each Metropolitan Statistical Area (MSA) to study trends and/or relationships on high ozone days (days in which one of the MSA sites measured an hourly ozone concentration90.0 ppbv). County emission maps of precursor gases, wind roses, total area averages of ozone, total downwind averages of ozone deviations, upwind averages of ozone, and a modified delta ozone analysis were all obtained and analyzed. The results of this study show a reduction in the delta ozone relative to an earlier study at RDU, but no average significant change at CLT (no comparison can be made for GSO). The statistical data analyses in this study are used to quantify the importance of local contributions and regional transport, to ozone air pollution in the MSAs.     

Estimating the change of carbon in the terrestrial biosphere from 18 000 BP to present using a carbon cycle model

The authors used a global High Resolution Biosphere Model (HRBM), consisting of a biome model and a carbon cycle model, to estimate the changes of carbon storage in the major pools of the terrestrial biosphere from 18 000 BP to present. The climate change data to drive the biosphere for 18 000 BP were derived from an Atmospheric General Circulation Model. Using the AGCM anomalies interpolated to a 0.5 degrees grid, the HRBM data base of the present climate was recalculated for 18 000 BP. The most important processes which influenced the carbon storage include (1) climate-induced changes in biospheric processes and vegetation distribution, (2) the CO(2) fertilization effect, (3) the inundation of lowland areas resulting from the sea level rise of 100 m. Two scenarios were investigated. The first scenario, which ignored the CO(2) fertilization effect, led to total carbon losses from the terrestrial biosphere of -460 x 10(9) t. Scenario 2, which assumed that the model formulation of the CO(2) fertilization effect as used for preindustrial to present could be extrapolated to the glacial 200 microl litre(-1) (ppmv, parts per million per volume), gave a carbon fixation in the terrestrial biosphere of +213 x 10(9) t. The two scenarios were compared with CO(2) concentration data and isotopic ratios from air in ice cores. The results of Scenario 1 are not in agreement with the data. Scenario 2 gives realistic delta(13)C shifts in the atmosphere but the biospheric carbon storage at the end of the glacial period seems too large. The authors suggest that the low atmospheric CO(2) concentration may have favoured the C-4 plants in ice age vegetation types. As a consequence the influence of the low CO(2) concentration was eventually reduced and the glacial carbon storage in vegetation, litter, and soil was increased.     

Organochlorine pesticide residues in human milk in Punjab, India

Human milk samples collected from areas having intensive cotton cultivation and sparse cotton cultivation in Punjab (India) were analysed for organochlorine insecticides. Both DDT and HCH were detected in almost all the samples analysed. The average levels of Sigma-DDT and Sigma-HCH residues in samples from cotton-growing areas were significantly higher than in those from areas where cotton is sparsely grown. Residues of Sigma-DDT mainly comprised p,p'-DDT and p,p'-DDE, while those of Sigma-HCH residues were mainly in the form of its beta-isomer. Median values of 0.52 microg g(-1) of Sigma-DDT and 0.19 microg g(-1) of Sigma-HCH in samples of human milk from cotton-growing areas of Punjab (India) were higher than those reported from most other countries in the World.     

Sensitivity of the terrestrial biosphere to climatic changes: impact on the carbon cycle

The biosphere is a major pool in the global carbon cycle; its response to climatic change is therefore of great importance. We developed a 5 degrees x 5 degrees longitude-latitude resolution model of the biosphere in which the global distributions of the major biospheric variables, i.e. the vegetation types and the main carbon pools and fluxes, are determined from climatic variables. We defined nine major broad vegetation types: perennial ice, desert and semi-desert, tundra, coniferous forest, temperate deciduous forest, grassland and shrubland, savannah, seasonal tropical forest and evergreen tropical forest. Their geographical repartition is parameterized using correlations between observed vegetation type, precipitation and biotemperature distributions. The model computes as a function of climate and vegetation type, the variables related to the continental biospheric carbon cycle, i.e. the carbon pools such as the phytomass, the litter and the soil organic carbon; and carbon fluxes such as net primary production, litter production and heterotrophic respiration. The modeled present-day biosphere is in good agreement with observation. The model is used to investigate the response of the terrestrial biosphere to climatic changes as predicted by different General Circulation Models (GCM). In particular, the impact on the biosphere of climatic conditions corresponding to the last glacial climate (LGM), 18 000 years ago, is investigated. Comparison with results from present-day climate simulations shows the high sensitivity of the geographical distribution of vegetation types and carbon content as well as biospheric trace gases emissions to climatic changes. The general trend for LGM compared to the present is an increase in low density vegetation types (tundra, desert, grassland) to the detriment of forested areas, in tropical as well as in other regions. Consequently, the biospheric activity (carbon fluxes and trace gases emissions) was reduced.     

Retrieval of heavy metal ions from solution via ferritisation

The paper summarises the results of the studies on retrieval of heavy metal ions in solution by ferritisation and its potential application in waste-water treatment. The optimum procedure for ferritisation of heavy metal ions in solution has been evolved with respect to pH, concentration of Fe2+, rate and time of aeration and temperature. The recommended procedure consists of controlled aeration of the solution containing heavy metal ions and ferrous ions at pH 9.5-10.5 at about 50 degrees C, until the black, granular, magnetic ferrite separates out. The metal ferrites can also be formed, even without heating or forced aeration, by ageing the mixed metal hydroxide precipitate at pH 10 to 11. The metal ferrites formed have been characterised by X-ray diffractometry. The laboratory-scope experiments conducted with synthetic heavy metal solutions as well as actual wastewater from a tanning industry showed that heavy metal ions can be effectively removed from solution to sub-ppm levels. The metal ferrites thus recovered may find commercial application as microwave absorbers, catalysts, metal scavengers, etc. This technique seems to have potential application in simultaneous, one step removal of different heavy metal ions from industrial wastewaters.     

Uptake and metabolism of 2,4,6-trinitrotoluene in higher plants

The fate of the explosive 2,4,6-TNT in plants is of major interest. Therefore, a method was developed to analyse TNT and derivatives in plant tissue. The method was utilized to investigate the uptake and metabolism of TNT inMedicago sativa andAllium schoenoprasum grown in hydroponic cultures containing TNT levels of 0.1 to 10 mg/1. Detectable concentrations of nitrotoluenes were significantly higher inAllium schoenoprasum than inMedicago sativa. The uptake of TNT in plants was directly related to the initial TNT level. The principal nitroaromatic components in roots and shoots of both plant species were identified as 4-ADNT and 2-ADNT in equal amounts, with substantially less TNT.     

Survey of heavy metal pollution and assessment of agricultural soil in Yangzhong district, Jiangsu Province, China

We investigated concentrations of Hg, Cd, Pb, Zn, Cu, As, Ni, and Cr in samples of soil, cereal, and vegetables from Yangzhong district, China. Compared to subsoils, the sampled topsoils are enriched in Hg, Cd, Cu, Pb, Zn, and As. High levels of Cd and Hg are observed in most agricultural soils. Concentrations of Cr and Ni show little spatial variation, and high Cu, Pb, and Zn contents correspond well to areas of urban development. High As contents are primarily recorded at the two ends of the sampled alluvion. The contents of Cd, Hg, and total organic carbon (TOC) increase gradually to maximum values in the upper parts of soil profiles, while Cr and Ni occur in low concentrations within sampled profiles. As, Pb, Cu, and Zn show patterns of slight enrichment within the surface layer. Compared to data obtained in 1990, Cd and Hg show increased concentrations in 2005; this is attributed to the long-term use of agrochemicals. Cr and Ni contents remained steady over this interval because they are derived from the weathering of parent material and subsequent pedogenesis. The measured As, Cu, Pb, and Zn contents show slight increases over time due to atmospheric deposition of material sourced from urban anthropogenic activity. Low concentrations of heavy metals are recorded in vegetables and cereals because the subalkaline environment of the soil limits their mobility. Although the heavy metal concentrations measured in this study do not pose a serious health risk, they do affect the quality of agricultural products.     

Modified Fenton reaction for trichlorophenol dechlorination by enzymatically generated H2O2 and gluconic acid chelate

Glucose oxidase is a well-known enzyme that catalyzes the oxidation of β-d-glucose to produce gluconic acid and hydrogen peroxide. Fenton reaction is a powerful oxidation technology used for the oxidation of groundwater pollutants. For the application of Fenton reaction in groundwater remediation, successful operation of Fenton reaction near neutral pH, and on-site generation of both H₂O₂ and chelate will be beneficial. The focus of this experimental study was to couple the glucose oxidation reaction with chelate-based Fenton reaction. The idea was to use the hydrogen peroxide and chelate gluconic acid generated during glucose oxidation for the dechlorination of 2,4,6-trichlorophenol (TCP) by Fenton reaction. The oxidation of glucose was achieved using the enzyme in free and immobilized forms. The rate of production of hydrogen peroxide was determined for each system, and was used to estimate the time required for complete consumption of glucose during the process, thus avoiding any traces of glucose in the Fenton reaction. In the case of free enzyme reaction, separation of the enzyme was achieved using an ultrafiltration membrane before initiating the Fenton reaction. The oxidation of TCP by Fenton reaction was performed at varying ratios of gluconic acid/Fe, and its effect on the decomposition of TCP and H₂O₂ was studied. TCP degradation was studied both in terms of parent compound degradation and free chloride generation.