Interpolating SRTM Elevation Data to Higher Resolution to Improve Hydrologic Analysis

The Shuttle Radar Topography Mission (SRTM) digital elevation model (DEM) has been a valuable resource for hydrological analysis, providing elevation data at a consistent resolution on a near‐global scale. However, its resolution (three arc‐second or 90 m) is sometimes too low to obtain the desired level of accuracy and precision for hydrologic analysis. We evaluated the performance of several methods for interpolating SRTM three arc‐second data to a 30‐m resolution grid to better represent topography and derive terrain characteristics of the landscape. STRM data were interpolated to 30‐m DEMs on a common grid using spline, inverse distance weighting (IDW), kriging (KR), natural neighbor methods, and cubic convolution (CC) resampling. Accuracy of the methods was assessed by comparing interpolated and resampled 30‐m grids with the reference data. Slope, aspect, sinks, and stream networks were derived for the 30‐m grids and compared on a cell‐by‐cell basis to evaluate their performance in reproducing the derivatives. The comparisons identify spline and KR as the most accurate interpolation methods, of which spline is preferred because of its relative simplicity. IDW provided the greatest bias in all methods with artifacts evident in slope and aspect maps. The performance of CC projection directly to a 30‐m resolution was comparable to spline interpolation, thus is recommended as the most convenient method for interpolating SRTM to a higher resolution.     

Aerosol Composition Change due to Dust Storm: Measurements between 1992 and 1999 at Gosan,Korea

Aerosol composition change between dust storm and non duststorm periods is studied using the TSP (Total SuspendedParticulate) data measured at Gosan, Korea between 1992 and1999. The concentrations of elements measured between 1993and 1996 and those of ions between 1992 and 1999 duringdust storms are compared with those during non-dust stormperiods in spring (March, April, and May). Among theanalyzed ions, the concentrations of crustal species(potassium, calcium, magnesium, and chloride) andanthropogenic species (nitrate and non-sea salt (nss)-sulfate) increased when dust storm occurs while those ofammonium and sodium did not increase. Among the analyzedelements, the concentrations of crustal species (Fe, Al,Ca, Ti, and Zn) increased when dust storm occurs whilethose of anthropogenic species (Mn, V, Ni, Cu, Cd, and Cr)did not increase. The only anthropogenic element of whichconcentration increased during dust storm periods was Pb.It was found that the concentrations of nitrate and nss-sulfatewere highest during spring. Also, the ratio of theyearly average concentrations of nitrate to nss-sulfateincreases, probably due to the emission trend change innortheast Asia, especially, in China.     

Impact of consistent boundary layer mixing approaches between NAM and CMAQ

Discrepancies in grid structure, dynamics and physics packages in the offline coupled NWS/NCEP NAM meteorological model with the U.S. Environmental Protection Agency Community Multiscale Air Quality (CMAQ) model can give rise to inconsistencies. This study investigates the use of three vertical mixing schemes to drive chemistry tracers in the National Air Quality Forecast Capability (NAQFC). The three schemes evaluated in this study represent various degrees of coupling to improve the commonality in turbulence parameterization between the meteorological and chemistry models. The methods tested include: (1) using NAM predicted TKE-based planetary boundary height, h, as the prime parameter to derive CMAQ vertical diffusivity; (2) using the NAM mixed layer depth to determine h and then proceeding as in (1); and (3) using NAM predicted vertical diffusivity directly to parameterize turbulence mixing within CMAQ. A two week period with elevated surface O₃ concentrations during the summer 2006 has been selected to test these schemes in a sensitivity study. The study results are verified and evaluated using the EPA AIRNow monitoring network and other ozonesonde data. The third method is preferred a priori as it represents the tightest coupling option studied in this work for turbulent mixing processes between the meteorological and air quality models. It was found to accurately reproduce the upper bounds of turbulent mixing and provide the best agreement between predicted h and ozonesonde observed relative humidity profile inferred h for sites investigated in this study. However, this did not translate into the best agreement in surface O₃ concentrations. Overall verification results during the test period of two weeks in August 2006, did not show superiority of this method over the other 2 methods in all regions of the continental U.S. Further efforts in model improvement for the parameterizations of turbulent mixing and other surface O₃ forecast related processes are warranted.     

Investigation of As, Mn and Fe fixation inside the aquifer during groundwater exploitation in the experimental system imitated natural conditions

Water-dissolved oxygen was supplied into anaerobic aquifer , which oxidized Fe(II), Mn(II) and trivalent arsenic and changed them into undissolved solid matter through hydrolysis, precipitation, co-precipitation and adsorption processes. The experiment was carried out on the column imitated a bore core of anaerobic aquifer with water phase containing Fe(II), Mn(II), As(III) concentration of 45.12 mg/L, 14.52 mg/L, 219.4 μg/L, respectively and other ions similarly composition in groundwater. After 6 days of air supply, concentration of iron reduced to 0.38 mg/L, manganese to 0.4 mg/L, arsenic to 9.8 μg/L (equivalent 99.16% of iron, 97.25% of manganese and 95.53% of arsenic fixed), and for other ions, the concentration changed almost according to general principles. Ion phosphate and silicate strongly influenced on arsenic removal but supported iron and manganese precipitation from water phase. Based on the experimental results, new model of groundwater exploitation was proposed.     

Recent advances in membrane bioreactor technology for wastewater treatment in China

Since the introduction of the membrane bioreactor (MBR) in China in the early 1990s, remarkable progress has been achieved on the research and application of this technology. China has now become one of the most active fields in the world in this regard. This review outlines the development of MBR-based processes in China and their performance of treating municipal and industrial wastewaters. Since membrane fouling is a critical operational problem with MBR processes, this paper also proposes updated understanding of fouling mechanisms and strategies of fouling control, which are mainly compiled from publications of Chinese researchers. As for the commercial application of MBR in the country, the latest statistics of large-scale MBR plants (>10000 m³·d⁻¹) are provided, and the growth trend of total treatment capacity as well as its driving force is analyzed.     

改性竹活性炭去除汞离子

采用溴化钾、碘化钾和硫磺对竹活性炭掺杂改性,利用电感耦合等离子体发射光谱仪测定滤液中汞离子浓度,用除汞效率和吸附容量评价活性炭对溶液中汞离子的吸附性能,探讨其吸附机理。结果表明,掺杂改性明显提高了竹活性炭的除汞性能。原竹活性炭的除汞效率为78.6%,吸附容量为2.210 mg/g;经碘化钾、溴化钾和硫磺掺杂改性后的竹活性炭除汞效率分别为94.3%、93.8%和88.8%,吸附容量分别为2.830、2.813和2.663 mg/g;经溴化钾(碘化钾)和硫磺联合改性的竹活性炭对水溶液中汞离子的吸附性能性能又有提高,其中以先载硫后载溴化钾的方法除汞效果最好,除汞效率达96.6%,吸附容量为2.898 mg/g。     

果园地面覆盖管理的生态经济效益分析

分析了果园地面覆盖管理的生态和经济效益，并对果园地面管理方式在果树产量、质量、营养、病虫害和土壤有机质、肥力、水分、侵蚀以及生态环境上的影响进行了赋分综合评价。评价的有利效应顺序是：有机物覆盖〉间作〉生草带状覆盖〉生草覆盖〉除草剂除草〉翻耕。据此，针对我国生态环境、人口、经济状况，提出了在山区的经济林果园内应推广应用秸杆地面覆盖技术，对于减少水土流失，提高果树产量具有显著的生态和经济效益。     

Monitoring of reduced sulfur compounds in the atmosphere of Gosan, Jeju Island during the Spring of 2001

The atmospheric concentrations of dimethylsulfide (DMS) and carbon disulfide (CS2) were measured concurrently with relevant environmental parameters at Gosan, Jeju Island, Korea during 5-26 April 2001. The mean concentrations for these two compounds were 18.7+/-17.9 and 6.4+/-9.9 pptv, respectively. Results of our analysis indicated that relative temporal variations between DMS and CS2 can be best described by dividing the whole data set into three different periods which reflect the variable transport patterns of air masses into the study area. (Periods I, II, and III denote: 5-10, 10-18, and 19-26 April.) The environmental conditions during those three periods varied greatly. The effects of continental and/or oceanic processes were evident for certain periods, yielding diverse relationships between DMS and CS2 in both absolute and relative terms. Most observed variations were best explained in terms of an interplay between source/sink processes and air mass transport patterns. The sea-to-air flux of DMS, when estimated using our measurement data during this study period, was approximately 4 micromole m(-2)d(-1).     

Transport characteristics of gas phase ozone in unsaturated porous media for in-situ chemical oxidation

Encapsulation technology is being investigated as a method for controlling pH in situ at contaminated groundwater sites where pH may limit remediation of organic contaminants. This study examined the effectiveness of using KH2PO4 buffer encapsulated in a pH-sensitive coating to neutralize pH in laboratory sand columns (1.5-1) under a simulated groundwater flow rate and characterized the pattern of capsule release in the flow-through system. Denitrification was used in the columns to increase the pH of the pore water. Each of three columns was equipped with three miniature mesh wells to allow contact of the buffer with column pore water, but capsules (15 g) were inserted into only one column (amended). The two other columns served as amendment (no buffer) and abiotic (no denitrification) controls. Oxidation-reduction potential, dissolved organic and inorganic carbon, NH4+, NO3- +NO2-, PO(4)3-, and pH were measured in the influent, two side ports, and effluent of the columns over time. Near complete conversion of 80 mg N/1 of nitrate and 152 mg/l of ethanol per day resulted in a mean pH increase from 6.2 to 8.2 in the amendment control column. The amended column maintained the target pH of 7.0 +/- 0.2 for 4 weeks until the capsules began to be depleted, after which time the pH slowly started to increase. The capsules exhibited pulses of buffer release, and were effectively dissolved after 7.5 weeks of operation. Base-neutralizing capacity contributed by the encapsulated buffer over the entire study period, calculated as cation equivalents, was 120 mM compared to 8 mM without buffer. This study demonstrates the potential for this technology to mediate pH changes and provides the framework for future studies in the laboratory and in the field, in which pH is controlled in order to enhance organic contaminant remediation by pH-sensitive systems.