制备条件对Mn-Fe/TiO2催化剂低温脱硝性能的影响

通过浸渍法制备了一系列Mn-Fe/TiO2催化剂,并采用XRD技术对其进行了表征,考察了锰前体种类、负载量（活性组分质量占载体质量的百分比）、Fe含量（Fe物质的量占活性组分物质的量的百分比）、焙烧温度等因素对催化剂低温选择性催化还原NO性能的影响。实验结果表明：以乙酸锰为前体制备的催化剂的脱硝活性明显高于以硝酸锰为前体制备的催化剂;负载量的增加有利于脱硝活性的提高,而Fe的添加对提高催化剂的活性有重要作用,但Fe含量超过15%后,对催化剂脱硝性能的影响并不明显;焙烧温度超过650 ℃时会使活性组分的结晶度提高,导致脱硝活性的降低。在锰前体为乙酸锰、负载量为15%、Fe含量为15%、焙烧温度为500 ℃、焙烧时间为6 h、反应温度为200 ℃的条件下,Mn-Fe/TiO2催化剂的NO转化率约为95%。     

Pressure-assisted ozonation of PCB and PAH contaminated sediments

Sediment contamination by recalcitrant organics such as polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) is prevalent and of a great concern. Remediation efforts are hampered by the hydrophobic nature of the contaminants that limits their availability as well as by the sediment matrix that limits their exposure to treatment agents. Using contaminated sediment samples from the Passaic River, St. Louis River, Waukegan Harbor, and Wells National Estuarine Research Reserve, this research demonstrated a new ozonation technique that incorporates rapid, successive cycles of pressurization (690 kPa) and depressurization, enabling more effective treatment than conventional ozonation would. Conventional ozonation reached maximum 60% and 40% removal of PAHs from the Passaic River (40 mg kg(-1) initially) and St. Louis River sediment (520 mg kg(-1) initially), respectively, in 1h; however, removals ceased despite prolonged treatment for 2h. The pressure-assisted technique removed 96% of PAHs from both river sediments within 1h; it completely removed both PAHs (16 mg kg(-1) initially) and PCBs (5.1 mg kg(-1) initially) from the Waukegan Harbor sediment in 0.5 h. The heightened treatment is explained by soil aggregate fracturing upon pressure cycles that exposes the contaminants as well as by the confluence of hydrophobic contaminants and O(3) at the gas-liquid interface in the presence of microbubbles. The technique is expected to accelerate O(3) treatment of a wide range of organic contaminants, and it may provide treatment to dredged and stored contaminated sediment.     

Evaluating the implementation of cleaner production audit demonstration projects

Cleaner production audit demonstration projects were carried out in two Chinese case factories as part of a project co-sponsored by the Illinois Environmental Protection Agency and China's State Environmental Protection Administration. Audit results at both factories were characterized by implementation of predominantly low- or no-cost options, notable reductions in water pollution, and incomplete financial benefit analyses. Two reasons explain the financial benefit analyses' apparent weakness. First, factory audit teams were inexperienced in the techniques and procedures used to determine the economic benefits of cleaner production options. Second, motivations project personnel had for participating in the demonstration projects were not centered on attaining the monetary benefits of implementing cleaner production. Instead, other factors related to the international nature of the project, such as a high degree of state level oversight and prestige, were more influential in affecting the behavior of project personnel.     

Development of a biobarrier for the remediation of PCE-contaminated aquifer

The industrial solvent tetrachloroethylene (PCE) is among the most ubiquitous chlorinated compounds found in groundwater contamination. The objective of this study was to develop a biobarrier system, which includes a peat layer to enhance the anaerobic reductive dechlorination of PCE in situ. Peat was used to supply primary substrate (electron donor) continuously. A laboratory-scale column experiment was conducted to evaluate the feasibility of this proposed system or PCE removal. This experiment was performed using a series of continuous-flow glass columns including a soil column, a peat column, followed by two consecutive soil columns. Anaerobic acclimated sludges were inoculated in all three soil columns to provide microbial consortia for PCE biodegradation. Simulated PCE-contaminated groundwater with a flow rate of 0.25 l/day was pumped into this system. Effluent samples from each column were analyzed for PCE and its degradation byproducts (trichloroethylene (TCE), cis-dichloroethylene (cis-DCE), vinyl chloride (VC), ethylene (ETH), and ethane). Results show that the decrease in PCE concentrations and production of PCE byproducts were observed over a 65-day operating period. Up to 98% of PCE removal efficiency was obtained in this passive system. Results indicate that the continuously released organics from peat column enhanced PCE biotransformation. Thus, the developed biobarrier treatment scheme has the potential to be developed into a cost-effective in situ PCE-remediation technology, and can be utilized as an interim step to aid in system scale-up.     

NPS MODEL PARAMETER UNCERTAINTY ANALYSIS FOR AN OFF-STREAM RESERVOIR1

ABSTRACT: Parameter uncertainties exert a significant effect on nonpoint source pollution (NPS) modeling results. A decision made on the basis of such results may thereby be inappropriate. In this work, the parameter uncertainty is analyzed to explore an improved modeling procedure. Drainage patterns generated from digital elevation data and rainfall are the major parameters examined. A case study for the watershed of the Posan off-stream reservoir is implemented. A significant spatial variation of NPS distribution simulated with a drainage pattern generated from varied methods is observed. The effects of rainfall randomness on the spatial loading distribution are assessed and computed based on a Monte Carlo simulation. The proposed procedure is capable of improving the quality of modeling results and the decision for an appropriate control strategy.