Occupational Exposure to Polycyclic Aromatic Hydrocarbons During Diesel Combustion

Identification and determination of polycyclic aromatic hydrocarbons (PAHs) in Diesel exhaust in the working environment and assessment of workers’ occupational exposure to these suspected human carcinogens were the aim of this experimental investigation.

The range of exposure factors calculated on the basis of 9 individual PAH concentrations determined in personal air samples shows that time-averaged concentration of these compounds did not exceed the Polish Maximum Admissible Concentration (MAC) value for PAHs, that is, 2 μg·m^–3. The highest concentrations of PAHs were determined in the breathing zone of forklift operators. The maximum exposure factor was 0.427 μg·m^–3 (about 1/4 of MAC).     

The Moderating Role of Hardiness and Social Support in the Relation Between Job Stressors and Well-Being. A Lesson From a Clerical Women Sample

The study concerns the moderating role of two variables—hardiness and social support—in the relation between job stressors and well-being. It was checked if there is a connection between hardiness and social support, and if these variables are directly related to the level of well-being. It was also hypothesized that hardiness and social support buffer the negative influence of stressors on well-being. The fact that social support and well-being are multidimensional variables was taken into account.

The cross-sectional study was conducted on a group of 200 women employed as office workers. The results showed that hardiness correlates with the indexes of emotional support as well as practical support coming from supervisors. The connection, however, was not strong. Hardiness and social support were directly connected with the level of well-being. Interaction of these two independent variables played a marginal role. As far as the buffering role of these variables was concerned, the results have shown that hardiness did not play a buffering role and social support did to a limited degree only.

The results of the study proved that it is justifiable to treat social support and well-being as multidimensional variables.     

Investigation of Blended Fibre Filtering Materials

Five variants of mixtures of different synthetic fibres at different area ratios were manufactured into needled nonwovens intended to be used as a filtering material for respiratory protection. Two variants were produced according to an earlier patent, and the contents of the other three was completely new. Samples of the nonwovens were tested for sodium chloride particles penetration and for breathing resistance. The results showed that one variant of a nonwoven, designated PP/PPFM, had very valuable filtering properties and that those properties were stable in time.     

Colloid-enhanced ultrafiltration in removal of traces amounts of borates from water

The use of colloid-enhanced ultrafiltration for boron removal from water is investigated. Biodegradable surfactant, 1,4-sorbitol oleate, was applied to obtain micelles and high molecular weight chitosan to reinforce their stability. Two kind of membranes were compared: neat porous polysulfone membrane and charged porous sulfonated polysylfone membrane; both with similar average pore diameter of 5 nm. The studies revealed that two key factors affect the boron rejection: presence of surfactant in the colloidal mixture and a repulsion effect of sulfone groups on the membrane surface. Both have a positive effect on boron removal.     

Estimation of wind blown dust emissions in Europe and its vicinity

The assessment of the wind blown dust emission for Europe and selected regions of North Africa and Southwest Asia was carried out using a mesoscale model. The mesoscale model was parameterized based on the current literature review. The model provides data on PM₁₀ emission from several dust reservoirs (anthropogenic, agriculture, semi- and natural) with spatial resolution of 10 × 10 km and temporal resolution of 1 h. The spatial variability of PM₁₀ emission depends on soil texture, land cover/land use as well as meteorological conditions. Lands covered with water or permanently wet were excluded from the model. The land covered with vegetation is treated as dust reservoir whose dust emission capacity depends on the type of vegetation and cover. The dust reservoirs are divided into reservoirs with stable and unstable surface. The changes of emission in time depend on meteorological parameters.The wind blown dust emission should be treated as a non-continuous spatio-temporal process. The emissions are estimated with high uncertainty. The estimated PM₁₀ yearly total load emitted by wind from the European territory is highly differentiated in space and time and is equal to 0.74 Tg. The total load of PM₁₀ emitted by wind from North African and Southwest Asian land surface located in the vicinity of European boundaries is assessed as nearly 50% (0.43 Tg) of the total load estimated for the whole Europe.The average yearly PM₁₀ emission factor for Europe was estimated at 0.139 Mg km^?2.The PM₁₀ emission from agricultural areas is estimated at 52% of the total wind blown emission from the domain of the European Union project “Improving and applying methods for the calculation of natural and biogenic emissions and assessment of impacts to the air quality” - NatAir.PM₁₀ emission factor for natural areas of Europe is estimated at 0.021 Mg km^?2. Appropriate factors for agricultural areas and anthropogenic areas are 0.157 Mg km^?2 and 0.118 Mg km^?2, respectively. The latter two factors are probably underestimated due to omitting in the model of other dust emission mechanisms than aeolian erosion.     

Quality of roof runoff waters from an urban region (Gdańsk,Poland)

The paper presents the results of testing of roof runoff waters from buildings in the city of Gdańsk (Poland), carried out as a part of a broader research project aimed at the determination of pollutant levels in precipitation. The analytes determined included volatile organohalogen compounds, petroleum hydrocarbons, Na+, K+, NH4+, Mg2+, Ca2+, F-, Cl-, NO2-, NO3-, PO4(3-), SO4(2-) ions, as well as organonitrogen, organophosphorus and organochlorine pesticides. In addition, the toxicity and pH of the samples were examined. The samples were collected over a period of six months, during or immediately following precipitation events. More than half of the samples (25) were found to be toxic, with inhibition exceeding 20%. The toxicity was weakly correlated to the levels of organonitrogen and organophosphorus pesticides in runoff waters. It was established that at least in some cases the roofing material affected the levels of the pollutants found in the samples.     

<Emphasis Type="Italic">Fusarium</Emphasis> head blight incidence and mycotoxin accumulation in three durum wheat cultivars in relation to sowing date and density

Durum wheat (Triticum turgidum var. durum) is an important crop in Europe, particularly in the Mediterranean countries. Fusarium head blight (FHB) is considered as one of the most damaging diseases, resulting in yield and quality reduction as well as contamination of grain with mycotoxins. Three winter durum wheat cultivars originating from Austria, Slovakia, and Poland were analyzed during 2012–2014 seasons for FHB incidence and Fusarium mycotoxin accumulation in harvested grain. Moreover, the effects of sowing density and delayed sowing date were evaluated in the climatic conditions of Southern Poland. Low disease severity was observed in 2011/2012 in all durum wheat cultivars analyzed, and high FHB occurrence was recorded in 2012/2013 and 2013/2014 seasons. Fusarium graminearum was the most abundant pathogen, followed by Fusarium avenaceum. Through all three seasons, cultivar Komnata was the most susceptible to FHB and to mycotoxin accumulation, while cultivars Auradur and IS Pentadur showed less symptoms. High susceptibility of cv. Komnata was reflected by the number of Fusarium isolates and elevated mycotoxin (deoxynivalenol, zearalenone, and moniliformin) content in the grain of this cultivar across all three seasons. Nivalenol was identified in the samples of cv. Komnata only. Genotype-dependent differences in FHB susceptibility were observed for the plants sown at optimal date but not at delayed sowing date. It can be hypothesized that cultivars bred in Austria and Slovakia show less susceptibility towards FHB than the cultivar from Poland because of the environmental conditions allowing for more efficient selection of breeding materials.     

Effect of treated swimming pool water on the levels of trihalomethanes in swimmer's urine

Swimming pools are considered to be the prime source for public exposure to trihalomethanes (THMs), mainly chloroform, because of their use for hygienic purposes. High doses of chlorine are easily perceptible by smell. The aim of this study was to measure simultaneously the THM levels in urine and blood of swimmers and in pool water itself (from city and university swimming pool), in order to investigate further the relationship between substances in different matrices at known environmental levels with uptake of these substances in indoor swimming pools. Volatile analytes were isolated and preconcentrated from the samples by thin layer headspace analysis (TLHS) with autogenous generation of the liquid sorbent. Chloroform, bromodichloromethane and dibromochloromethane were detected in the urine of all persons attending a swimming pool. Concentrations of THM compounds varied in the case of each swimmer. The research confirmed that approximately 10% of the volatile haloorganic compounds are excreted in urine in the unchanged form.     

The effect of spent bleaching earth ageing process on its physicochemical and microbial composition and its potential use as a source of fatty acids and triterpenes

This study was aimed at investigating the physicochemical and microbiological changes that took place during the ageing process of spent bleaching earth in the presence of autochthonous microorganisms. Research material included fresh spent bleaching earth (SBE₀) and the same material after 3 years of storage at the constant temperature of 20 °C, without aeration and moistening (SBE₃). Changes in the chemical composition of analysed waste material were observed during its ageing process point to a spontaneous bioconversion of fat substance towards formation and/or release of free saturated fatty acids C16:0 and C18:0 (14.3 g 100 g^?1 D.M.), triterpenes (8.48 g 100 g^?1 D.M.), cholesterol (3.29 g 100 g^?1 D.M.), small quantities of carbohydrates and esters (0.80 g 100 g^?1 D.M.). This process was accompanied by other changes in physicochemical parameters of the waste material, such as colour, odour and viscosity, decrease in fat content from 28.27 to 24.6 % and that of soluble forms of metals (Mo, Cu, Fe, Zn, Ni, Cr and Mn), ranging from 25 to 75 %, and an increase in pH, from 3.85 to 4.2. At the same time, changes in the microbial consortium were observed.     

Phytotoxicity of nanoparticles—problems with bioassay choosing and sample preparation

For a full estimation of the risk related with the presence of engineered nanoparticles (ENPs) in the environment, the use of the current ecotoxicological methods may prove insufficient. In the study presented herein, various methods of assessment of ecotoxicity were applied to compare the phytotoxicity of three ENPs: nano-ZnO, nano-TiO₂ and nano-Ni. The toxicity was assayed both for aqueous solutions of the ENPs (the germination/elongation test and Phytotestkit F^TM) and for ENPs added to soil (Phytotoxkit F^TM and modified Phytotoxkit F^TM). Lepidium sativum was used as a test plant. The scope of the study also included the assessment of the effect of the method of ENP application to the soil (as powder and aqueous suspension) on their phytotoxicity. In the course of the study, no effect of the studied ENPs and their bulk counterparts on the germination of seeds was observed. The root growth inhibition of L. sativum depended on the kind of test applied. The trend between concentration of ENPs and effect depended on the method used and kind of ENPs. For most nanoparticles (despite of the method used), the differences in phytotoxicity between nano and bulk particles were observed. Depending on the kind of ENPs, their phytotoxicity differs between water and soil. ZnO (nano and bulk) and nano-Ni were more toxic in soil than in water. For TiO₂ and bulk-Ni, reverse trend was observed. A different method of ENP application to soil differently affects the phytotoxicity.