Volatile organohalogen compounds in human urine: the effect of environmental exposure

The paper presents the results of determination of volatile organohalogen compounds (VOX) in urine samples from subjects exposed to these compounds in their workplaces and through consumption of chlorinated tap water. The analytes were isolated and preconcentrated from the complex urine samples using the thin layer headspace (TLHS) technique with autogenous generation of the liquid sorbent. Final gas chromatographic determination was carried out by direct aqueous injection with electron capture detection (DAI-ECD). The results indicate that only a small fraction (<4%) of the VOX input is excreted with urine in the non-metabolized form. A positive correlation was found between the occupational levels of VOX in the workplace and their levels in urine. VOX levels in the urine of subjects not exposed to them in the workplace were significantly lower. Their presence in the organisms was most probably related to consumption of tap water produced by chlorination of surface waters.     

Metal concentrations in deciduous tree leaves from urban areas in Poland

Accumulation of metals in deciduous tree foliage fromurban areas in western-south Poland was monitored duringthe vegetation season of 2000 year. Concentrations of Al,Ba, Ca, Cd, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Sr, Ti and Znwere measured in birch, willow, linden and maple leavesusing the ICP-AES method. Seasonal variations of metalconcentrations and their relations with sampling sitewere investigated. The most dynamic accumulation of Al,Cd, Cr, Ni and Pb was observed for examined species. Thehighest differences in element concentrations forinvestigated sites were found for Ba, Cd, Mn and Ni.Interelement correlations were investigated. In allfoliar samples synergistic relationships between Al–Crand Ca-Sr were found. Statistically significant negativecorrelations were observed only for Cd and Ti in birch leaves.     

Management of hazardous fly-ash energy waste in the adsorptive removal of diclofenac by the use of synthetic zeolitic materials

Zeolite-carbon composites (Na-P1(C), Na-X(C)) and pure zeolites (Na-P1, Na-X) were synthesized from hazardous high-carbon fly ash waste (HC FA) via hydrothermal reaction with sodium hydroxide (NaOH). These solids were applied in the removal of diclofenac (DCF) from aqueous solution, with and without poly(acrylic acid) (PAA). The experiments included adsorption–desorption measurements, as well as electrokinetic and stability analyses. The obtained results showed that HC FA and Na-P1(C) had the greatest adsorption capacity towards DCF, i.e., 26.51 and 21.19 mg/g, respectively. PAA caused considerable decrease in the DCF adsorption due to the competition of both adsorbates of anionic character for active sites. For example, the adsorbed amount of DCF on Na-P1 without PAA was 14.11 mg/g, whereas the one measured with PAA was 5.08 mg/g. Most of prepared solids were effectively regenerated by the use of NaOH. Desorption degree reached even 73.65% in the single systems (with one adsorbate) and 97.24% in the mixed ones (with two adsorbates). Zeolitic materials formed suspensions of rather low stability, which underwent further deterioration in the organic molecules presence. All the results obtained in this study indicated that HC FA can be successfully managed in the removal of organic substances.

     

Changes in the liver proteome in apoE knockout mice exposed to inhalation of silica nanoparticles indicate mitochondrial damage and impairment of ER stress responses associated with microvesicular steatosis

Environmental Science and Pollution Research - The adverse effects of air pollution on the cardiovascular system have been well documented. Nonalcoholic fatty liver disease (NAFLD) is an...     

Mean annual (222)Rn concentration in homes located in different geological regions of Poland: first approach to whole country area

The paper presents the results of year-long measurements of radon (²²²Rn) concentration inside 129 buildings in Poland in relation to the geological conditions of their foundation. The authors took into account the division of the country into tectonic units, as well as the lithology of the rocks forming the bedrock of these buildings. As expected, the highest value of mean annual ²²²Rn concentration (845 Bq/m³) was recorded in a building situated in the area of the Sudetes, while the highest geometric mean (characteristic of the expected log-normal data distribution) was calculated based on measurements from buildings located within the East-European craton, in the area of Mazury-Podlasie monocline, where it reached 231 Bq/m³. Such results reflect geological conditions - the occurrence of crystalline rocks (especially U- and Ra-enriched granites and orthogneisses) on the surface in the Sudetes, and of young post-glacial sediments containing fragments of Scandinavian crystalline rocks, also enriched with U and Ra, in the area of Mazury-Podlasie monocline. However, the least expected result of the investigations was finding out that, contrary to the hitherto widespread belief, none of the major tectonic units of Poland can be excluded from the list of those containing buildings with mean annual ²²²Rn concentration exceeding 200 Bq/m³. The mean annual concentration of radon for all the buildings were much higher than the mean concentration value (49.1 Bq/m³) of indoor radon in Poland quoted so far. These results cast a completely new light on the necessity to perform measurements of radon concentration in residential buildings in Poland, no more with reference to small areas with outcrops of crystalline rocks (especially the Sudetes, being the Polish fragment of the European Variscan belt), but for all the major tectonic units within Poland.     

Binational school-based monitoring of traffic-related air pollutants in El Paso, Texas (USA) and Ciudad Juárez, Chihuahua (México)

Paired indoor and outdoor concentrations of fine and coarse particulate matter (PM), PM2.5 reflectance [black carbon(BC)], and nitrogen dioxide (NO₂) were determined for sixteen weeks in 2008 at four elementary schools (two in high and two in low traffic density zones) in a U.S.-Mexico border community to aid a binational health effects study. Strong spatial heterogeneity was observed for all outdoor pollutant concentrations. Concentrations of all pollutants, except coarse PM, were higher in high traffic zones than in the respective low traffic zones. Black carbon and NO₂ appear to be better traffic indicators than fine PM. Indoor air pollution was found to be well associated with outdoor air pollution, although differences existed due to uncontrollable factors involving student activities and building/ventilation configurations. Results of this study indicate substantial spatial variability of pollutants in the region, suggesting that children’s exposures to these pollutants vary based on the location of their school.     

A comparative study of the performance of passive samplers

Atmospheric concentrations of benzene, toluene, ethylbenzene, and xylenes (o-xylene and m,p-xylene) were assessed in the Tricity area (Gdańsk-Sopot-Gdynia, Poland) with the use of two types of passive samplers: permeation (homemade passive samplers) and diffusive (Radiello and Orsa 5). Samples were collected during 2008 at selected sites in the Tricity area at monitoring stations belonging to the agency of Regional Air Quality Monitoring Foundation. The field study was conducted to compare the performance of these two different types of passive samplers. A statistical approach was formulated, and the experimental data were evaluated using the paired t test, Wilcoxon signed rank-sum test, and Friedman analysis of variance. All the statistical results confirm the hypothesis that the differences between the performances of the three sampling devices are highly significant. Despite the fact that data obtained with the homemade passive sampler indicated that the results were higher compared with those for the Radiello and Orsa 5 diffusive samplers, the authors note that all differences between the homemade permeation sampler and the Radiello and Orsa 5 diffusive samplers are positive.     

Concrete with carpet recyclates: suitability assessment by surface energy evaluation

Worn out textile floor coverings are burdensome wastes that are degraded in landfill sites after a very long period of time. One of the ways to manage this kind of waste may be the use of carpet recyclate (CR) as an additive for concrete reinforcement. Therefore, an attempt was made to predict the effects of recyclate additives on the durability a concrete-carpet mixture by employing the method of assessing surface properties of components in the concrete-carpet recyclates composite. Testing was performed on carpet wastes, containing polyamide (PA) and polypropylene (PP) piles and butadiene-styrene resin with chalk filler (BSC) as back coating, to assess the suitability of CR additive for concrete reinforcement by surface energy evaluation. Based on the measurements of contact angles, the free surface energy of recyclate components was determined. The reversible work of adhesion at the interface between these components in dry and wet states was also calculated. The results show that CR with both PA and PP fibers form a strong and water-resistant bond with concrete.     

Comparison of mass concentrations of SO2 determined in air by two different methods

Mass concentrations of sulphur dioxide were determined in parallel 24-hour samples of ambient air at a measuring site in Zagreb during a period of eight years. The methods used were the West-Gaeke's tetrachloromercurate-pararosaniline method (TCM) and the Standard British Method (SBM). Total results for the annual intervals of measuring were analyzed statistically and also discussed separately for winter and summer periods, in order to see whether they are influenced by seasonal rhythm.     

Thermal Solid State Reactions of Potato Starch with α-Hydroxy Acids

The numerous applications of dextrins resulting from the heating of potato starch with α-amino acids prompted me to check the thermal reactions of starch with hydroxy acids and their lactones, such as citric acid, lactic acid, tartaric acid, and coumarine. The course of reactions was observed by means of Simultaneous TG/DSC Thermal Analyser. The thermal reactions were carried out on convectional and microwave heating. The course of reactions under such conditions was compared and properties of resulting dextrins were recognized. The structure and properties of products were obtained from FTIR spectra, water solubility tests, and pH measurements. It was found, that hydroxy acids and/or products of their thermal transformations reacted with starch and/or resulting dextrins producing esters or crosslinking esterification of dextrins took place. The properties of new dextrins were presented in order to check, in further studies, their application for selective flotation of complex metal ores and their suitability as prebiotics.