Utilization of Waste Lignin and Hydrolysate From Chromium Tanned Waste in Blends of Hot-Melt Extruded PVA-Starch

The demand for biodegradable plastic material is increasing worldwide. However, the cost remains high in comparison with common forms of plastic. Requirements comprise low cost, good UV-stability and mechanical properties, as well as solubility and water uptake lead to the preparation of multi-component polymer blends based on polyvinyl alcohol and starch in combination with waste products that are hard to utilize—waste lignin and hydrolysate extracted from chromium tanned waste. Surprisingly the addition of such waste products into PVA gives rise to blends with better biodegradability than commercial PVA in an aquatic aerobic environment with non-adapted activated sludge. These blends also exhibited greater solubility in the water and UV stability than commercial PVA. Tests on the processing properties of the blends (melt flow index, tensile strength and elongation at break of the films) as well as their mechanical properties showed that materials based on these blends might be applied in agriculture (for example as the systems for controlled-release pesticide or fertilizer) and, somewhat, in the packaging sector.     

Modelling and Optimization of Uranium (VI) Ions Adsorption Onto Nano-ZnO/Chitosan Bio-composite Beads with Response Surface Methodology (RSM)

Nano-ZnO-chitosan bio-composite beads were prepared for the sorption of \({\text{UO}}_{2}^{{2+}}\) from aqueous media. The resulting nano-ZnO/CTS bio-composite beads were characterized by TEM, XRD etc. The sorption of \({\text{UO}}_{2}^{{2+}}\) by bio-composite beads was optimized using RSM. The correlation between four variables was modelled and studied. According to RSM data, correlation coefficients (R²?=?0.99) and probability F-values (F?=?2.24?×?10^??10) show that the model fits the experimental data well. Adsorption capacity for nano-ZnO/CTS bio-composite beads was obtained at 148.7 mg/g under optimum conditions. The results indicate that nano-ZnO/CTS bio-composite beads are appropriate for the adsorption of \({\text{UO}}_{2}^{{2+}}\) ions from aqueous media. Also, the suitability of adsorption values to adsorption isotherms was researched and thermodynamic data were calculated.     

Estimation of end of life mobile phones generation: the case study of the Czech Republic

The volume of waste electrical and electronic equipment (WEEE) has been rapidly growing in recent years. In the European Union (EU), legislation promoting the collection and recycling of WEEE has been in force since the year 2003. Yet, both current and recently suggested collection targets for WEEE are completely ineffective when it comes to collection and recycling of small WEEE (s-WEEE), with mobile phones as a typical example. Mobile phones are the most sold EEE and at the same time one of appliances with the lowest collection rate. To improve this situation, it is necessary to assess the amount of generated end of life (EoL) mobile phones as precisely as possible. This paper presents a method of assessment of EoL mobile phones generation based on delay model. Within the scope of this paper, the method has been applied on the Czech Republic data. However, this method can be applied also to other EoL appliances in or outside the Czech Republic. Our results show that the average total lifespan of Czech mobile phones is surprisingly long, exactly 7.99 years. We impute long lifespan particularly to a storage time of EoL mobile phones at households, estimated to be 4.35 years. In the years 1990-2000, only 45 thousands of EoL mobile phones were generated in the Czech Republic, while in the years 2000-2010 the number grew to 6.5 million pieces and it is estimated that in the years 2010-2020 about 26.3 million pieces will be generated. Current European legislation sets targets on collection and recycling of WEEE in general, but no specific collection target for EoL mobile phone exists. In the year 2010 only about 3-6% of Czech EoL mobile phones were collected for recovery and recycling. If we make similar estimation using an estimated average EU value, then within the next 10 years about 1.3 billion of EoL mobile phones would be available for recycling in the EU. This amount contains about 31 tonnes of gold and 325 tonnes of silver. Since Europe is dependent on import of many raw materials, efficient recycling of EoL products could help reduce this dependence. To set a working system of collection, it will be necessary to set new and realistic collection targets.     

Synthesis of Polylactide-b-Poly (Dimethyl Siloxane) Block Copolymers and Their Blends with Pure Polylactide

The synthesis of polylactide (PLA)-b-poly (dimethyl siloxane) (PDMS) linear block copolymers and their use in blends with pure-PLA are described. PLA-b-PDMS linear block copolymers were obtained by the transesterification reaction in chloroform solution between poly(dimethyl siloxane) bis (2-aminopropyl ether) (molecular weight 2,000?Da) with PLA in the presence of stannous octoate. Molecular weights (Mw) of the block copolymers were varied from 53,800 to 63,600?Da while that of pristine PLA was 73,600?Da. The copolymers obtained were purified by fractional precipitation and then characterized by ¹H NMR, FTIR, GPC, viscometry and DSC techniques. Blends of pure PLA with PLA-b-PDMS block copolymers displayed improved elastic properties (elongation up to 140%) compared to pure PLA (elongation ~9%). Thermal, mechanical and morphological characterization of the blends were also conducted.     

Evaluation of heavy metal content in digestate from batch anaerobic co-digestion of sunflower hulls and poultry manure

In this experimental study, the biogas digestate from mesophilic batch anaerobic co-digestion of poultry manure and an agricultural residue, sunflower hulls, was characterized, particularly in terms of heavy metal content, in order to evaluate whether the biogas digestate was suitable for land applications. Ni, Zn, Cu, Pb, Cr, Cd, and Hg were detected in the biogas digestate in each trial, however, their concentrations were always lower than the limit values stated in Turkish regulations. The main source of heavy metals in the biogas digestate seemed to be the poultry manure, not the agricultural residue. The commercial feedstuffs that are frequently supplemented with various essential elements to promote optimum nutrient supply and optimum growth rates may have contributed to heavy metals presence in the biogas digestate. The results indicated that the biogas digestate from anaerobic co-digestion of manure and agricultural residue could be utilized as fertilizer in agricultural applications.     

Potential utilization of burned wood in manufacture of medium density fiberboard

The potential utilization of burned wood in the manufacture of medium density fiberboard (MDF) was investigated. For this aim, the MDF panels were made of various mixtures of burned pine wood (Pinus sylvestris L.), unburned beech (Fagus orientalis L.) and oak (Ouercus robur L.) woods under commercial conditions in an MDF company. The mixture ratio of the unburned beech and oak woods to the burned pine wood were 50/50 wt%. The mixing ratios of burned wood chips with unburned wood chips were 0:100, 25:75, 50:50, 75:25 and 100:0, %, respectively. A commercial urea–formaldehyde resin was used as a binder. The physical properties measured in the investigation included density and thickness swelling, while the mechanical properties examined were bending strength, modulus elasticity, internal bond, screw holding ability perpendicular to the plane of panel, and janka hardness perpendicular to the plane of the panel. Surface roughness and color of the panels were also measured. The results indicated that all the panels met the mechanical properties of general-purpose MDF requirements of EN 622-5. The surface roughness of the MDF panels containing burned wood decreased with increasing burned wood content but remained higher than the control panels. The dimensional stability of the MDF panels decreased with the incorporation of burned wood fibers as compared with the control MDF panels.     

Ventral polarization vision in tabanids: horseflies and deerflies (Diptera: Tabanidae) are attracted to horizontally polarized light

Adult tabanid flies (horseflies and deerflies) are terrestrial and lay their eggs onto marsh plants near bodies of fresh water because the larvae develop in water or mud. To know how tabanids locate their host animals, terrestrial rendezvous sites and egg-laying places would be very useful for control measures against them, because the hematophagous females are primary/secondary vectors of some severe animal/human diseases/parasites. Thus, in choice experiments performed in the field we studied the behavior of tabanids governed by linearly polarized light. We present here evidence for positive polarotaxis, i.e., attraction to horizontally polarized light stimulating the ventral eye region, in both males and females of 27 tabanid species. The novelty of our findings is that positive polarotaxis has been described earlier only in connection with the water detection of some aquatic insects ovipositing directly into water. A further particularity of our discovery is that in the order Diptera and among blood-sucking insects the studied tabanids are the first known species possessing ventral polarization vision and definite polarization-sensitive behavior with known functions. The polarotaxis in tabanid flies makes it possible to develop new optically luring traps being more efficient than the existing ones based on the attraction of tabanids by the intensity and/or color of reflected light.     

Glass buildings on river banks as “polarized light traps” for mass-swarming polarotactic caddis flies

The caddis flies Hydropsyche pellucidula emerge at dusk from the river Danube and swarm around trees and bushes on the river bank. We document here that these aquatic insects can also be attracted en masse to the vertical glass surfaces of buildings on the river bank. The individuals lured to dark, vertical glass panes land, copulate, and remain on the glass for hours. Many of them are trapped by the partly open, tiltable windows. In laboratory choice experiments, we showed that ovipositing H. pellucidula are attracted to highly and horizontally polarized light stimulating their ventral eye region and, thus, have positive polarotaxis. In the field, we documented that highly polarizing vertical black glass surfaces are significantly more attractive to both female and male H. pellucidula than weakly polarizing white ones. Using video polarimetry, we measured the reflection-polarization characteristics of vertical glass surfaces of buildings where caddis flies swarmed. We propose that after its emergence from the river, H. pellucidula is attracted to buildings by their dark silhouettes and the glass-reflected, horizontally polarized light. After sunset, this attraction may be strengthened by positive phototaxis elicited by the buildings' lights. The novelty of this visual-ecological phenomenon is that the attraction of caddis flies to vertical glass surfaces has not been expected because vertical glass panes do not resemble the horizontal surface of waters from which these insects emerge and to which they must return to oviposit.     

Nutritional correlates and mate acquisition role of multiple sexual traits in male collared flycatchers

The information content of a sexual signal may predict its importance in a multiple signal system. Many studies have correlated sexual signal expression with the absolute levels of nutrient reserves. In contrast, the changes of nutrient reserves associated with signal expression are largely unknown in the wild due to technical limitations although they are important determinants of signal information content. We compared two visual and eight acoustic sexual traits in male collared flycatchers to see whether the nutritional correlates of expression predict the role of the signal in sexual selection. We used single point assays of plasma lipid metabolites to estimate short-term changes in nutritional state in relation to sexual trait expression during courtship. As a measure of sexual selection, we estimated the relationship with pairing latency after arrival in a 4-year dataset. Males which found a mate rapidly were characterized by large wing and forehead patches, but small song strophe complexity and small figure repertoire size. Traits more strongly related to pairing latency were also more closely related to changes in nutrient reserves. This indicates a link between signal role and information content. Small wing patches and, surprisingly, complex songs seemed to indicate poor phenotypic quality and were apparently disfavoured at mate acquisition in our population. Future studies of the information content of sexual traits, especially dynamic traits such as song, may benefit from the use of plasma metabolite profiles as non-invasive indicators of short-term changes in body condition.     

Prenatal prediction of childhood-onset spinal muscular atrophy (SMA) in Turkish families

Childhood-onset spinal muscular atrophy (SMA) is one of the most common neurodegenerative genetic disorders. SMN1 is the SMA-determining gene deleted or mutated in the majority of SMA cases. There is no effective cure or treatment for this disease yet. Thus, the availability of prenatal testing is important. Here we report prenatal prediction for 68 fetuses in 63 Turkish SMA families using direct deletion analysis of the SMN1 gene by restriction digestion. The genotype of the index case was known in 40 families (Group A) but unknown in the remaining 23 families (Group B). A total of ten fetuses were predicted to be affected. Eight of these fetuses were derived from Group A and two of these fetuses were from Group B families. Two fetuses from the same family in Group A had the SMNhyb1 gene in addition to homozygous deletion of the NAIP gene. One fetus from Group A was homozygously deleted for only exon 8 of the SMN2 gene, and further analysis showed the presence of both the SMN1 and SMNhyb1 genes but not the SMN2 gene. In addition, one carrier with a homozygous deletion of only exon 8 of the SMN1 gene was detected to have a SMNhyb2 gene, which was also found in the fetus. To our knowledge, these are the first prenatal cases with SMNhyb genes. Follow-up studies demonstrated that the prenatal predictions and the phenotype of the fetuses correlated well in 33 type I pregnancies demonstrating that a careful molecular analysis of the SMN genes is very useful in predicting the phenotype of the fetus in families at risk for SMA. Copyright © 2002 John Wiley & Sons, Ltd.