Comparing Contaminant Removal Costs for Aquifer Recharge with Wastewater with Water Supply Benefits

The use of waters of impaired quality has been suggested as a means to expand available water resources supply for water‐limited communities. An ongoing concern is the safety of supplies that use wastewater because of the potential for introduction of emerging contaminants such as pharmaceuticals into drinking water supplies. Prior research into contaminants of emerging concerns (CECs) have included a variety of methods, but the only consistent removal is with reverse osmosis (RO) membranes, ultraviolet light (UV), and advanced oxidation processes (AOP). However, few of these prior studies have measurable quantities of these contaminants in the influent wastewater, so determining actual removal percentages is difficult. This project was designed to evaluate the removal of CECs to verify that a 3‐log removal of common constituents was realized. Spike testing was used to compare to prior research and to evaluate whether the project costs were competitive with other forms of reuse or other water supplies. The combination of RO/UV/AOP was effective at obtaining a 3‐log removal of CECs, but the RO and UV/AOP processes alone were not capable of removing all substances. However, despite the extensive treatment, the proposed process was both competitive cost‐wise and met the water quality goals.     

Comparisons of polychromatic and monochromatic UV-based treatments of bisphenol-A in water via toxicity assessments

Polychromatic ultraviolet irradiation, such as from medium pressure (MP) Hg lamps may enhance the UV degradation of environmental pollutants as compared to low pressure (LP) Hg UV sources emitting monochromatic irradiation. Typically, studies involving destruction of environmental pollutants such as endocrine disrupting compounds (EDCs) are based on measurement of the parent compound decay using analytical chemistry, but such information is insufficient to determine an effective treatment endpoint because the identity and biological activity of many transformation products remain unknown. Bioanalytical methods to assess residual biological activity of a treated water offers one means to compare removal efficiency of EDC activity between MP- and LP-UV lamps under photolysis and UV/H2O2 oxidation. In this study, changes in estrogenic activity of bisphenol-A (BPA) as a function of UV treatment were evaluated using both an in vitro yeast estrogen screen and in vivo vitellogenin assay with Japanese medaka (Oryzias latipes) fish. Decay of BPA parent compound and formation of degradation products were followed using HPLC analysis. Results demonstrated that MP-UV direct photolysis more effectively removed BPA and associated estrogenic activity compared to LP-UV lamps. UV in combination with H2O2 significantly removed estrogenic activity in vitro and in vivo compared to direct photolysis; however, no significant difference in removal rates was found between the two lamps under UV/H2O2 oxidation. Furthermore, the UV/H2O2 process was effective for reducing embryo toxicity of BPA, but resulted in the production of acidic intermediates, causing acute toxicity and delayed hatching in some medaka embryos.     

Dioxins, dioxin-like PCBs and chloroorganic contaminants in herring, Clupea harengus, from different fishing grounds of the Baltic Sea

The contaminant levels of dioxins, dioxin-like PCBs and a range of chloroorganic compounds have been determined in relation to various fishing grounds of the Baltic Sea. Sampling covered an area from the Skagerrak to the coast of Latvia. The data are compared with herring from fishing grounds in the North Sea and west of the British Isles. Also the temporal trend of the dioxin levels in the edible part of herring landed around the Island of Rügen is given from commercial samples collected between 1996 and 2004. A continuous increase of the dioxin concentrations was observed from west to east. Lowest concentrations of 0.199 ng WHO-PCDD/F-TEQ kg(-1)wet weight were found in herring fillets west of the British Isles. Highest level of 6.972 ng WHO-PCCD/F-TEQ kg(-1)w.w. was analysed in fillets off the coast of Latvia. Results showed also a spatial dependence of the WHO-TEQ ratio dioxins:dioxin-like PCBs and of the dioxin congener profile. Only the DDT group of various chloroorganic compounds determined, showed a dependence from the fishing ground. A clear temporal tendency could not be deduced from the data.     

Assessing gait changes in firefighters due to fatigue and protective clothing

Each year, roughly 11,000 firefighters are injured as a result of slips, trips and falls, which account for over 25% of all fireground injuries. Wearing personal protective equipment (PPE) can increase risk of fall-related injuries due to its weight, restrictiveness, and increased heat stress. Modification of PPE may serve to mitigate firefighter injuries related to loss of balance and falls. We examined the effects of choosing ‘enhanced’ protective clothing (lightweight, breathable, and less restrictive compared to typical firefighting PPE) and simulated firefighting tasks (18-min bout over four activities) on subsequent gait performance. To assess the effect of wearing protective clothing and firefighting activity, seven gait parameters and three movement errors were assessed during level and obstacle-crossing walking tasks. Forty-four firefighters wore one of two types of PPE (‘Standard’, ‘Enhanced’) during three testing conditions (baseline in station uniform, pre-firefighting activity in PPE, and post-firefighting activity in PPE). The effect of donning any PPE was found to significantly impair gait performance. Fatigue may impact effective mobility since more movement errors were observed during post-activity than pre-activity assessments. Although the Enhanced PPE did not lead to any significant differences in gait parameters compared to Standard PPE, participants in Enhanced PPE made twice as many movement errors, potentially attributed to lack of familiarity with the gear. These results suggest that wearing firefighting PPE and heat-stress induced fatigue are associated with reduced gait performance and increased risk for tripping over obstacles.     

Rangeland and pasture monitoring: an approach to interpretation of high-resolution imagery focused on observer calibration for repeatability

Collection of standardized assessment and monitoring data is critically important for supporting policy and management at local to continental scales. Remote sensing techniques, including image interpretation, have shown promise for collecting plant community composition and ground cover data efficiently. More work needs to be done, however, evaluating whether these techniques are sufficiently feasible, cost-effective, and repeatable to be applied in large programs. The goal of this study was to design and test an image-interpretation approach for collecting plant community composition and ground cover data appropriate for local and continental-scale assessment and monitoring of grassland, shrubland, savanna, and pasture ecosystems. We developed a geographic information system image-interpretation tool that uses points classified by experts to calibrate observers, including point-by-point training and quantitative quality control limits. To test this approach, field data and high-resolution imagery (∼3 cm ground sampling distance) were collected concurrently at 54 plots located around the USA. Seven observers with little prior experience used the system to classify 300 points in each plot into ten cover types (grass, shrub, soil, etc.). Good agreement among observers was achieved, with little detectable bias and low variability among observers (coefficient of variation in most plots <0.5). There was a predictable relationship between field and image-interpreter data (R ² > 0.9), suggesting regression-based adjustments can be used to relate image and field data. This approach could extend the utility of expensive-to-collect field data by allowing it to serve as a validation data source for data collected via image interpretation.     

Phthalate levels in Norwegian indoor air related to particle size fraction

Phthalates are found in numerous consumer products, including interior materials like polyvinyl chloride (PVC). Several studies have identified phthalates in indoor air. A recent case-control study demonstrated associations between allergic symptoms in children and the concentration of phthalates in dust collected from their homes. Here we have analyzed the content of selected phthalates in particulate matter (PM): PM(10) and PM(2.5) filter samples collected in 14 different indoor environments. The results showed the presence of the phthalates di-n-butyl phthalate (DBP), butyl benzyl phthalate (BBP), dicyclohexyl phthalate (DCHP) and diethyl hexyl phthalate (DEHP) in the samples. The dominating phthalate in both PM(10) and PM(2.5) samples from all locations was DBP. More than a 10-fold variation in the mean concentration of total phthalates between sampling sites was observed. The highest levels of total phthalates were detected in one children's room, one kindergarten, in two primary schools, and in a computer room. The relative contribution of total phthalates in PM(10) and PM(2.5) was 1.1 +/- 0.3% for both size fractions. The contribution of total phthalates in PM(2.5) to total phthalates in PM(10) ranged from 23-81%, suggesting different sources. Of the phthalates that were analyzed in the PM material, DBP was found to be the major phthalate in rubber from car tyres. However, our analyses indicate that tyre wear was of minor importance for indoor levels of both DBP as well as total phthalates. Overall, these results support the notion that inhalation of indoor PM contributes to the total phthalate exposure.     

Mason Valley Groundwater Model: Linking Surface Water and Groundwater in the Walker River Basin,Nevada1

Carroll, Rosemary W.H., Greg Pohll, David McGraw, Chris Garner, Anna Knust, Doug Boyle, Tim Minor, Scott Bassett, and Karl Pohlmann, 2010. Mason Valley Groundwater Model: Linking Surface Water and Groundwater in the Walker River Basin, Nevada. Journal of the American Water Resources Association (JAWRA) 46(3):554-573. DOI: 10.1111/j.1752-1688.2010.00434.x Abstract: An integrated surface water and groundwater model of Mason Valley, Nevada is constructed to replicate the movement of water throughout the different components of the demand side of water resources in the Walker River system. The Mason Valley groundwater surface water model (MVGSM) couples the river/drain network with agricultural demand areas and the groundwater system using MODFLOW, MODFLOW’s streamflow routing package, as well as a surface water linking algorithm developed for the project. The MVGSM is capable of simulating complex feedback mechanisms between the groundwater and surface water system that is not dependent on linearity among the related variables. The spatial scale captures important hydrologic components while the monthly stress periods allow for seasonal evaluation. A simulation spanning an 11-year record shows the methodology is robust under diverse climatic conditions. The basin-wide modeling approach predicts a river system generally gaining during the summer irrigation period but losing during winter months and extended periods of drought. River losses to the groundwater system approach 25% of the river’s annual budget. Reducing diversions to hydrologic response units will increase river flows exiting the model domain, but also has the potential to increase losses from the river to groundwater storage.     

Determining sources of dissolved organic carbon and disinfection byproduct precursors to the McKenzie River, Oregon

This study was conducted to determine the main sources of dissolved organic carbon (DOC) and disinfection byproduct (DBP) precursors to the McKenzie River, Oregon (USA). Water samples collected from the mainstem, tributaries, and reservoir outflows were analyzed for DOC concentration and DBP formation potentials (trihalomethanes [THMFPs] and haloacetic acids [HAAFPs]). In addition, optical properties (absorbance and fluorescence) of dissolved organic matter (DOM) were measured to provide insight into DOM composition and assess whether optical properties are useful proxies for DOC and DBP precursor concentrations. Optical properties indicative of composition suggest that DOM in the McKenzie River mainstem was primarily allochthonous--derived from soils and plant material in the upstream watershed. Downstream tributaries had higher DOC concentrations than mainstem sites (1.6 +/- 0.4 vs. 0.7 +/- 0.3 mg L(-1)) but comprised < 5% ofmainstem flows and had minimal effect on overall DBP precursor loads. Water exiting two large upstream reservoirs also had higher DOC concentrations than the mainstem site upstream of the reservoirs, but optical data did not support in situ algal production as a source of the added DOC during the study. Results suggest that the first major rain event in the fall contributes DOM with high DBP precursor content. Although there was interference in the absorbance spectra in downstream tributary samples, fluorescence data were strongly correlated to DOC concentration (R2 = 0.98), THMFP (R2 = 0.98), and HAAFP (R2 = 0.96). These results highlight the value of using optical measurements for identifying the concentration and sources of DBP precursors in watersheds, which will help drinking water utilities improve source water monitoring and management programs.