Validation of a diffusive sampler for NO2

A diffusive sampler for NO2, Willems badge, was validated in laboratory experiments and field tests. The collecting reagent for NO2 in the sampler is triethanolamine, and the analysis is based on a modified colorimetric method, the Saltzman method. The analysis was performed by a flow injection analysis (FIA) technique. The sampling rate for the sampler was determined to be 40.0 ml min-1. There was no effect of NO2 concentration or relative humidity on sampling rate, and the influence of sampling time was found to be small. The detection limit was 4 micrograms m-3 for a 24 h sample. The capacity is high enough to allow sampling of 150 micrograms m-3 for 7 days, which is twice the recommended Swedish short-term (24 h) guideline value as a 98-percentile over 6 months. In field tests, the sampler performed well, even at wind speeds higher than 2 m s-1, and at low temperatures. The overall uncertainty of the method was 24%. The sensitivity and capacity of the method also make it suitable for personal sampling for 2-8 h in working environments.     

Influence of Processing Additives on the Degradation of Melt-Pressed Films of Poly(ε-Caprolactone) and Poly(Lactic Acid)

Melt-pressed films of polycaprolactone (PCL) and poly(lactic acid) (PLA) with processing additives, CaCO₃, SiO₂, and erucamide, were subjected to pure fungal cultures Aspergillus fumigatus and Penicillium simplicissimum and to composting. The PCL films showed a rapid weight loss with a minor reduction in the molecular weight after 45 days in A. fumigatus. The addition of SiO₂ to PCL increased the rate of (bio)erosion in A. fumigatus and in compost. The use of a slip additive, erucamide, was shown to modify the properties of the film surface without decreasing the rate of bio(erosion). Both the rate of weight loss and the rate of molecular weight reduction of PCL increased with decreasing film thickness. The addition of CaCO₃ to PLA significantly reduced the thermal degradation during processing, but it also reduced the rate of the subsequent (bio)degradation in the pure fungal cultures. PLA without additives and PLA containing SiO₂ exhibited the fastest (bio)degradation, followed by PLA with CaCO₃. The degradation of the PLA films was initially governed by chemical hydrolysis, followed by an acceleration of the weight change and of the molecular weight reduction. PLA film subjected to composting exhibits a rapid decrease in molecular weight, which then remains unchanged during the measurement period, probably because of crystallization.     

Solid waste treatment within the framework of life-cycle assessment

Traditionally, treatment of solid waste has been given limited attention in connection with life-cycle assessments (LCAs). Often, only the amounts of solid wastes have been noted. This is unsatisfactory since treatment of solid waste, e.g. by landfilling or incineration, is an operation, requiring inputs and producing outputs, which should be described in the inventory of an LCA, in parallel to other operations. However, there are difficulties in describing emissions from solid waste treatments and there is a need for development of such methods. In this paper an approach for describing emissions from incineration and landfilling is outlined. Methodological questions concerning the time-frame and allocation principles are discussed. Methods for estimating potential emissions from landfilling of municipal solid waste and industrial wastes are suggested. The methods are used for calculating potential emissions from landfilling of some typical wastes. These emissions are compared with the emissions from other stages in the life cycle for some materials and wastes. it is shown that the potential emissions from landfilling are, for some products, of importance for the final results. Hence, if emissions from landfilling are neglected, or underestimated, results and conclusions in an LCA may be misleading.     

Conditioning sulfidic mine waste for growth of Agrostis capillaris—impact on solution chemistry

Contamination of the environment due to mining and mineral processing is an urgent problem worldwide. It is often desirable to establish a grass cover on old mine waste since it significantly decreases the production of leachates. To obtain sustainable growth, it is often necessary to improve several properties of the waste such as water-holding capacity, nutrient status, and toxicity. This can be done by addition of organic materials such as wood residues, e.g., compost. In this study, we focus on the solution chemistry of the leachates when a substrate containing historic sulfidic mine waste mixed with 30 % (volume) bark compost is overgrown by Agrostis capillaris. The pot experiments also included other growth-promoting additives (alkaline material, mycorrhiza, and metabolizable carbon) to examine whether a more sustainable growth could be obtained. Significant changes in the plant growth and in the leachates composition were observed during 8 weeks of growth. It was concluded that in this time span, the growth of A. capillaris did not affect the composition of the leachates from the pots. Instead, the composition of the leachates was determined by interactions between the bark compost and the mine waste. Best growth of A. capillaris was obtained when alkaline material and mycorrhiza or metabolizable carbon was added to the substrate.     

Simulations of stomatal conductance and ozone uptake to Norway spruce saplings in open-top chambers

A simulation model was developed to estimate the stomatal conductance and ozone flux to Norway spruce saplings in open-top chambers. The model was parameterized against needle conductance measurements that were made on 4-6-year-old spruce saplings, grown in open-top chambers, in July-September during three different seasons. The spruce saplings were either maintained well watered or subject to a 7-8 week drought period in July-September each year. The simulated conductance showed a good agreement with the measured conductance for the well-watered as well as the drought stress-treated saplings. The simulations were significantly improved when different vapour pressure deficit (VPD) functions were applied for well-watered and drought-stressed spruce saplings. The cumulated ozone uptake which was calculated from the conductance simulations showed less variation between years, compared to the cumulative ozone exposure index AOT40 (accumulated exposure over a threshold of 40 ppb or nl l(-1)) for the corresponding time periods. Measurements in May 1995 demonstrated the occurrence of long-term 'memory-effects' from the drought stress treatments on the conductance. Memory-effects need to be considered when simulation models for stomatal conductance are to be applied to long-lived forest trees under a multiple stress situation.     

Ethics and biodiversity offsetting

Biodiversity offsetting is an increasingly applied tool aiming to compensate for environmental damage caused by exploitation projects. Critics, however, raise concerns over the purported effectiveness of offsetting and question the ethical underpinnings and implications of offsetting. These ethical dimensions have largely been overlooked in research, which may lead to offsetting systems that fail to respect the values intended to be safeguarded. To address these dimensions, 5 ethical objections in the scientific literature were identified: offsetting violates nature's intrinsic value; losses of nature cannot be compensated for by human interventions; too little is known to make adequate trades; offsetting impedes virtuous dispositions toward nature; and offsetting has negative justice implications. We examined these objections and arguments against them based on the ethical concepts of intrinsic and instrumental values, anthropocentrism, nonanthropocentrism, and deontological, consequentialist, and virtue-ethical paradigms. Both nonanthropocentric and anthropocentric concerns were expressed in deontological, consequential, and virtue-ethical framings. Objections mostly had a deontological or virtue-ethical basis, whereas counterarguments were based on consequential reasoning, but common ground in practice is often conceivable. Based on our findings, we formulated 10 recommendations for policy makers and 5 questions for practitioners to consider. We propose, for example, that policy makers clarify aims, legislate on no-go areas, and govern the use of multipliers. We suggest that practitioners consider, for instance, how to improve case-specific knowledge and promote learning and stakeholder engagement. We hope these recommendations and questions will encourage further discussion of the ethics of biodiversity offsets and ultimately strengthen the respect for biodiversity and human-welfare values at stake in offsetting projects.     

PREDICTING THE SUMMER PEAK BIOMASS OF FOUR SPECIES OF BLUE-GREEN ALGAE (CYANOPHYTA/CYANOBACTERIA) IN SWEDISH LAKES1

ABSTRACT: Stepwise multiple regression analysis was used to develop models predicting the summer peak biomass of Aphanizomenon flos-aquae, Anabaena flos-aquae, Oscillatoria agardhii, and Microcystis aeruginosa in four Swedish lakes. These analyses suggest that while epilimnetic total phosphorus concentration is the principal predictor of their peak biomass, other factors such as station mean depth, water temperature, total nitrogen, and total CO₂ concentration are also important.     

Spatially valid data of atmospheric deposition of heavy metals and nitrogen derived by moss surveys for pollution risk assessments of ecosystems

For analysing element input into ecosystems and associated risks due to atmospheric deposition, element concentrations in moss provide complementary and time-integrated data at high spatial resolution every 5 years since 1990. The paper reviews (1) minimum sample sizes needed for reliable, statistical estimation of mean values at four different spatial scales (European and national level as well as landscape-specific level covering Europe and single countries); (2) trends of heavy metal (HM) and nitrogen (N) concentrations in moss in Europe (1990–2010); (3) correlations between concentrations of HM in moss and soil specimens collected across Norway (1990–2010); and (4) canopy drip-induced site-specific variation of N concentration in moss sampled in seven European countries (1990–2013). While the minimum sample sizes on the European and national level were achieved without exception, for some ecological land classes and elements, the coverage with sampling sites should be improved. The decline in emission and subsequent atmospheric deposition of HM across Europe has resulted in decreasing HM concentrations in moss between 1990 and 2010. In contrast, hardly any changes were observed for N in moss between 2005, when N was included into the survey for the first time, and 2010. In Norway, both, the moss and the soil survey data sets, were correlated, indicating a decrease of HM concentrations in moss and soil. At the site level, the average N deposition inside of forests was almost three times higher than the average N deposition outside of forests.     

Critical Anthropomorphism and Animal Ethics

Anthropomorphism has long been considered a cardinal error when describing animals. Ethicists have feared the consequences of misrepresenting animals in their reasoning. Recent research within human-animal studies, however, has sophisticated the notion of anthropomorphism. It is suggested that avoiding anthropomorphism merely creates other morphisms, such as mechanomorphism. Instead of avoiding anthropomorphism, it is argued that it is a communicative strategy that should be used critically. Instances of anthropomorphism in animal ethics are analyzed in this paper. Some analogies made between people and non-human animals in present theories of animal ethics are clear instances of psychological anthropomorphism. Other analogies are implicit cases of cultural anthropomorphism. It is argued that animal ethics needs to take the wider discourse of critical anthropomorphism into account in order to sophisticate the understanding and use of anthropomorphic projections. Anthropomorphism is an efficient tool of communication, and it may be made an adequate one as well.