Metal Leachability and Anthropogenic Signal in Roadside Soils Estimated from Sequential Extraction and Stable Lead Isotopes

Several roadside soil samples were collected at two field sites in Sweden. They were analysed for total elemental content (using both ICP-MS and XRF) and stable lead isotopes. Extraction with deicing salt solution and sequential extraction were performed in order to elucidate the potential mobility due to the use of deicing agents. The total concentrations of elements, especially lead, have decreased and lead is presently almost at background concentrations (15-51 ppm for surface samples). However, the isotopic signature indicates that old gasoline lead still is left at the site constructed prior to 1975. The field site constructed in 1992 showed, however, no 206Pb/207Pb ratio below 1.14. Only minor amounts were leached using deicing salt solutions; for lead only 0.29%, on average, was extracted indicating that the mobile fraction already was released. Sequential extraction indicated that lead mainly was associated with reducible (34.4%) and oxidisable (35.4%) fractions. Exchangable and acid soluble fractions contained 20.3% while 10.0% was found in the residual fraction. The salt extraction released, however, very low concentrations indicating that most in fraction 1 is acid soluble (e.g. carbonates). Tungsten was also found at high concentrations indicating a possible impact from studded tires. For tungsten the following composition was obtained: residual (48.0%) > oxidisable (47.6%) > reducible (3.3%) > exchangeable/acid soluble (1.1%). From the isotopic studies it was also suggested that the order for incorporating anthropogenic lead into soils is exchangeable/carbonates > (hydr)oxides > organic matter > residual. The multivariate technique principal component analysis (PCA) seems promising for evaluating large sequential extraction datasets.     

Major inorganic ions in North Pole snow samples

Major inorganic ions, pH, total N and P were analyzed in eight arctic snow samples collected in March, April and May 1984 during an expedition in the North Pole region (N83₀18′ W73₀06′ - N89.960₀). The concentrations of the ions in different samples were close to each other and the values obtained seem to be representative for mean concentrations in the snow. In the sample taken from the North Pole the pH value was 5.00 while the H⁺-, SO^2?₄- and NO^?₃-concentrations were 0.24, 6.2 and 4.3 μmol/l, respectively. The concentrations are exceedingly low and agree very well with earlier results from arctic snow samples.     

Determination of airborne anhydrides using LC-MS monitoring negative ions of di-n-butylamine derivatives

An air sampling method for simultaneous determination of organic acid anhydrides and isocyanates is presented. Air samples are collected in impinger flasks filled with 0.01 M di-n-butylamine (DBA) in a mixture of toluene-acetonitrile (7:3, v/v) with a 13 millimetre glass fibre filter in series. The amount of anhydrides and isocyanates are determined as their amide and urea derivatives using LC-MS. Four anhydrides, maleic anhydride (MA), phthalic anhydride (PA), tetrahydrophthalic anhydride (TA) and cis-hexahydrophthalic anhydride (HA) and 11 isocyanates could be separated in 9 minutes using gradient elution. Anhydride-DBA derivatives in standard solutions were quantified using LC with chemiluminescent nitrogen detection (CLND). Anhydride-DBA derivatives were found to be stable for at least two months when stored in acetonitrile or toluene in the freezer. The yield of DBA derivatives of anhydrides in the 0.01 M DBA in toluene-acetonitrile (7:3, v/v) was in the range of 70->95%. Using MS and negative electrospray ionisation (ES-) linear calibrations curves were obtained for the anhydrides with correlation coefficients ranging from 0.9970-0.9997. The instrumental detection limit for the anhydrides ranged from 10-30 fmol, based on a signal to noise root mean square (RMS) ratio of 3. Monitoring positive and negative ions simultaneously, both isocyanates and anhydrides could be determined as their DBA derivatives in the same chromatographic run. When air samples were collected during thermal degradation of different coated metal sheets both anhydrides and isocyanates were present in the same samples and all the studied anhydrides were found.     

Determination of technical grade isocyanates used in the production of polyurethane plastics

A method for determination of technical grade isocyanates used in the production of polyurethane (PUR) is presented. The isocyanates in technical grade products were characterised as di-n-butylamine (DBA) derivatives using LC-MS and LC-chemiluminescent nitrogen detection (CLND) and the total isocyanate content was compared to a titration assay. For collection of isocyanates in air, an impinger-filter sampling technique with DBA as derivatisation reagent was used. Characterised DBA and nonadeuterium labelled DBA derivatives of isocyanates in technical products were used as calibration standards and internal standards, respectively, in the analysis of air samples. Three workplaces were studied where PUR products were produced either by spraying or by moulding. In both technical products and in air samples, a number of monomeric, oligomeric and prepolymeric isocyanates of e.g. methylenebisphenyl diisocyanate (MDI) and hexamethylene diisocyanate (HDI) were characterised. Several of these have not previously been described in workplace atmospheres. In the technical isocyanate products, between 69 and 102% of the NCO content determined by titration was accounted for by LC-CLND. Quantifications of a wide range of isocyanates in air samples were performed with correlation coefficients in the range 0.988-0.999 (n= 8) and the instrumental detection limits were 0.7-25 pg. At the two workplaces where MDI- and HDI isocyanurate-based products were sprayed, the isocyanate composition in the air reflected the composition in the technical product. At the workplace where a MDI-based product was used in a moulding process, only the monomeric isocyanates were found in the air. The advantage of using characterised technical grade isocyanates as analytical standards was clearly demonstrated and the possibility of using index compounds when monitoring isocyanate exposure is discussed.     

Determination of isocyanates, aminoisocyanates and amines in air formed during the thermal degradation of polyurethane

An air sampling method for the determination of isocyanates, aminoisocyanates and amines formed during the thermal degradation of polyurethane (PUR) is presented. The method is based on the collection of air samples using impinger flasks containing di-n-butylamine (DBA) in toluene with a glass fibre filter in series. Isocyanates are derivatized with DBA to urea derivatives, and amines are derivatized in a subsequent work-up procedure with ethyl chloroformate (ET) to carbamate esters. Amine, aminoisocyanate and isocyanate derivatives were characterized using liquid chromatography-time of flight mass spectrometry (LC-TOFMS) and liquid chromatography-chemiluminescent nitrogen detection (LC-CLND). Quantification was performed by LC-MS, monitoring molecular ions [MH]+ in the electrospray mode. The instrumental detection limits for amines, aminoisocyanates and isocyanates were in the ranges 30-40, 2-3 and 3-70 fmol, respectively. Thermal degradation products of PUR were observed in high concentrations during welding in district heating pipes and PUR-coated metal sheets. Eleven isocyanates, three amines and five aminoisocyanates were identified. The concentrations of isocyanates, aminoisocyanates and amines in samples collected in the smoke close to the welding spot were in the ranges 150-650, 4-290 and 1-70 ppb, respectively. In samples collected in the breathing zone, isocyanates and aminoisocyanates were observed in the ranges 9-120 and 4-19 ppb, respectively. The compounds were present in both gas and particle phases. Volatile compounds dominated in the gas phase, whereas less volatile compounds dominated in the particle phase. The method presented makes it possible to sample and determine amines and aminoisocyanates, in addition to isocyanates. The need to monitor these compounds is clearly illustrated by the high concentrations found during the thermal degradation of PUR.     

Molecular Weight Changes and Polymeric Matrix Changes Correlated with the Formation of Degradation Products in Biodegraded Polyethylene

The molecular weight changes in abiotically and biotically degraded LDPE and LDPE modified with starch and/or prooxidant were compared with the formation of degradation products. The samples were thermooxidized for 6 days at 100°C to initiate degradation and then either inoculated with Arthobacter paraffineus or kept sterile. After 3.5 years homologous series of mono- and dicarboxylic acids and ketoacids were identified by GC-MS in abiotic samples, while complete disappearance of these acids was observed in biotic environments. The molecular weights of the biotically aged samples were slightly higher than the molecular weights of the corresponding abiotically aged samples, which is exemplified by the increase in from 5200 g/mol for a sterile sample with the highest amount of prooxidant to 6000 g/mol for the corresponding biodegraded sample. The higher molecular weight in the biotic environment is explained by the assimilation of carboxylic acids and low molecular weight polyethylene chains by microorganisms. Assimilation of the low molecular weight products is further confirmed by the absence of carboxylic acids in the biotic samples. Fewer carbonyls and more double bonds were seen by FTIR in the biodegraded samples, which is in agreement with the biodegradation mechanism of polyethylene.     

Levels of brominated flame retardants in blood in relation to levels in household air and dust

Levels of tri- to decabrominated diphenyl ethers (BDEs), 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE) and 1,2-bis(pentabromophenyl)ethane (DeBDethane) were determined in air, sedimentary dust and human plasma from five households in Sweden. The levels of the individual BDEs in the plasma samples were in the same order of magnitude as in other studies of the general population in Scandinavia, and varied between non-detectable (<0.41 ng g(-1) l.w.) to 17 ng g(-1) (l.w.). BDE#28 and #47 were present in all air samples, with mean values of 0.015 and 0.12 ng m(-3), respectively, except for one sample where the BDE#47 concentration was below the limit of detection (<0.17 ng m(-3)). BDE#209 was found in one of the five air samples at a concentration of 0.26 ng m(-3). DeBDethane was also detected in one sample, in which the BDE#209 level was below LOD (<0.021 ng m(-3)), at a level of 0.023 ng m(-3). All the target compounds were found in the sedimentary dust samples at levels from 0.51 to 1600 ng g(-1), the highest concentration representing BDE#209. The most abundant components in plasma, air and dust were BDE#47, #99 and #209. In the plasma samples BDE#207 and #206 were also present at similar concentrations as BDE#47. In the sedimentary dust samples, DeBDethane was also among the most abundant BFRs. A positive relationship was found for the sumBDE concentrations in dust and plasma, although the relationship was strongly dependent on one of the five observations. BFR levels in dust and air were not dependent on the house characteristics such as living area, floor material or number of electronic devices.     

A model of ecological and evolutionary consequences of color polymorphism

We summarize direct and indirect effects on fitness components of animal color pattern and present a synthesis of theories concerning the ecological and evolutionary dynamics of chromatic multiple niche polymorphisms. Previous endeavors have aimed primarily at identifying conditions that promote the evolution and maintenance of polymorphisms. We consider in a conceptual model also the reciprocal influence of color polymorphism on population processes and propose that polymorphism entails selective advantages that may promote the ecological success of polymorphic species. The model begins with an evolutionary branching event from mono- to polymorphic condition that, under the influence of correlational selection, is predicted to promote the evolution of physical integration of coloration and other traits (cf. multi-trait coevolution and complex phenotypes). We propose that the coexistence within a population of alternative ecomorphs with coadapted gene complexes promotes utilization of diverse environmental resources, population stability and persistence, colonization success, and range expansions, and enhances the evolutionary potential and speciation. Conversely, we predict polymorphic populations to be less vulnerable to environmental change and at lower risk of range contractions and extinctions compared with monomorphic populations. We offer brief suggestions as to how these falsifiable predictions may be tested.     

Reduced European emissions of S and N--effects on air concentrations, deposition and soil water chemistry in Swedish forests

Changes in sulphur and nitrogen pollution in Swedish forests have been assessed in relation to European emission reductions, based on measurements in the Swedish Throughfall Monitoring Network. Measurements were analysed over 20 years with a focus on the 12-year period 1996 to 2008. Air concentrations of SO₂ and NO₂, have decreased. The SO₄-deposition has decreased in parallel with the European emission reductions. Soil water SO₄-concentrations have decreased at most sites but the pH, ANC and inorganic Al-concentrations indicated acidification recovery only at some of the sites. No changes in the bulk deposition of inorganic nitrogen could be demonstrated. Elevated NO₃-concentrations in the soil water occurred at irregular occasions at some southern sites. Despite considerable air pollution emission reductions in Europe, acidification recovery in Swedish forests soils is slow. Nitrogen deposition to Swedish forests continues at elevated levels that may lead to leaching of nitrate to surface waters.     

Governance of Complex Socio-Environmental Risks: The Case of Hazardous Chemicals in the Baltic Sea

Complex socio-environmental risks challenge society. In response to scientific uncertainty and socio-political controversies, environmental governance, precaution, and the ecosystem approach to management are held forward as complements to governmental risk-based sector-restricted regulation. We analyze this development for hazardous substances in the Baltic Sea. Based on interviews and policy analysis, we study informal governance and, in particular, four central EU and international policies, and investigate how present governance relates to risks and objectives at hand. While showing emergence of broader governance approaches, we conclude that central objectives will not likely be met. Furthermore, we question the quest for broad environmental governance and emphasize the value of command and control regulation, if it implements precaution. These findings contribute to the theorizing on environmental (risk) governance. Finally, we provide some ideas that could help development and implementation of risk policies for hazardous chemicals in the Baltic Sea as well as other complex risks.